Tw1st3d what pump is it? And why u use 2 three-way adapter?
Printable View
Tw1st3d what pump is it? And why u use 2 three-way adapter?
It's a wasted XSPC XSO 400 - need a new onQuote:
Originally Posted by rafwlkp
I go two T's, one for filling and one for draining - want it easy :p:
Figured i would post a couple of pics of the new rig. i havent finished cleaning up the wiring yet nor have i finished with the lighting but i figured yall might want to take a look
done benching for now cause i want to play some games but finished up at qx9650@4455mhz(405*11), maximus formula, 8800gts(g92) (850/2067/2200)-vgpu 1.35v -- WinXP
'06 -- 18560
EK Supreme on QX9650
EK fullcover on 8800gts (g92)
EK NB block
EK Asus 3a 2 x mosfet blocks
loop 1 --> cpu & nb -- 120.3 rad
loop 2 --> vc and both mosfets -- swifty MCR220 rad
Dual bay res with 4 barbs so both loops in 1 res
http://ubc_ccc.home.comcast.net/H20 ...ture 004-1.JPG
http://ubc_ccc.home.comcast.net/H20 ...ture 005-1.JPG
http://ubc_ccc.home.comcast.net/H20 ...ture 006-1.JPG
Very very nice CCC!!
The loops are well routed :up:
As i scrolled over those pics CCC, my speakers went, "Bling bling bling"
dangerden TDX
BIXII x 2 medium uv yates
masterkleer 7/16" tubing
T-line
dangerden pump
dangerden typee x1950 water block
fluid xp.
im new to this forum =].
My watercooling
The rad and the fishtank, you can also see steve the inflateable pumpkin
http://i91.photobucket.com/albums/k3...y/DSC_0631.jpg
http://i91.photobucket.com/albums/k3...y/DSC_0630.jpg
http://i91.photobucket.com/albums/k3...y/DSC_0629.jpg
http://i91.photobucket.com/albums/k3...y/DSC_0628.jpg
http://i91.photobucket.com/albums/k3...y/DSC_0626.jpg
The pump sitting on a sheet of folded bubble wrap
http://i91.photobucket.com/albums/k3...y/DSC_0623.jpg
http://i91.photobucket.com/albums/k3...y/DSC_0620.jpg
that's my ex MBO, p4c800:) had a mobile pent on it, watercooled...
what's the rest of the config?
Mindless, your rig is completely ghetto. :up:
http://xs123.xs.to/xs123/08052/img_2658208.jpg
XFX 8400GS on D-tek Fuzion GFX, hitting 1ghz on the core, 2540mhz shaderclock.
Hello.
After a while I made same changes to my rig.
This is link to previous version: http://www.xtremesystems.org/forums/...07#post2245407
I added second graphic card NV 7950GT in SLI mode with Alphacool waterblock, then additional 2Gb of RAM with second RAM waterblock.
Now I have 10 blocks (7 homemade, 2 Alphacool GPUs, 1 Innovatek HDD) with 2 2x120 Radiators, 2 Laing waterpumps.
I also upgraded CPU to Athlon AM 6400 x2 (125Watt of heat to dissipate - previous produced only 65Watt)
Temperature : GPU 36* to 38* stress, Processor 40 to 48* during stress, NB 30*, Water 25*C. Wents are running at 2/3 of nominal speed . With two pumps running flowmeter showes 780 RPM on single punp just 520RPM.
Pictures now:
Before upgrade
http://i29.photobucket.com/albums/c2...emachinery.jpg
http://i29.photobucket.com/albums/c2...oardblocks.jpg
And after upgrade, to fill the space I added old Voltometer and Amperemeter and some light with UV cathodes
http://i29.photobucket.com/albums/c2...ki/kmpnew4.jpg
http://i29.photobucket.com/albums/c2...ki/kmpnew3.jpg
http://i29.photobucket.com/albums/c2...ki/kmpnew1.jpg
Top of my case stays the same as previously.
http://i29.photobucket.com/albums/c2...ki/kmpnew2.jpg
Greets
it's what it looks like, a p4 prescott 3.2, the board no longer likes to be overclocked, used to run it at 4ghz. an x800xt clocked at something silly, and some old school original BH5 ram.Quote:
Originally Posted by De5tr0yer
The watercooling was basically an experiement, i'm buying a new computer soon and want to go straight to water, so i thought i'd try it out, funnily enough the whole setup was less than£100, so just under $200
http://img262.imageshack.us/img262/9045/dsc00003xl1.jpg
Re did machine :)
Why? Improve loop flow and get more air to flow through the radiator.
My new water system that i upgraded in december from a total ghetto one. Pics are form last month and its abit tidier now actually.(got rid of the yellow ide cable)
http://i170.photobucket.com/albums/u..._122_999lo.jpg
http://i170.photobucket.com/albums/u...122_1005lo.jpg
http://i170.photobucket.com/albums/u..._122_388lo.jpg
http://i170.photobucket.com/albums/u..._122_412lo.jpg
http://i170.photobucket.com/albums/u...122_1028lo.jpg
Links to the images don't seem to be working
Changed hosting
I love those blocks, almost thought the were from MIPS. Very nice!Quote:
Originally Posted by Doc PL
same I was like I want MIPS blocks for my mobo so bad, like his. then I read the description and was like really??
That blocks are homemade by Misiu15go ;) [half price Mips blocks :D ]Quote:
I love those blocks, almost thought the were from MIPS. Very nice!
Rebuild / Loop Rehaul finally finished. :)
http://farm3.static.flickr.com/2074/...eccf842d_b.jpg
http://farm3.static.flickr.com/2059/...de129a75_b.jpg
White light looks pretty awsome. ;)
I am going to be using that my self to. :)
Nice build btw. :)
Thanks. But those are actually blue ccfl's that I'm using.Quote:
Originally Posted by LockBreaker
Nice build. :up: It looks very clean. Those white/blue ccfls look sweet. But how bad was filling and bleeding with the res like that?
Thanks.
I had to top up the res a few times and bam, it was filled.
And as for bleeding, I ran the loop by itself by powering it with another computer.
So I was able to move the rad and cpu block around to bleed it. I left the cap of the res off and I'm pretty sure it took less than 5mins to bleed it.
Quote:
Originally Posted by TopherTony
almost though they were mips myself :p: