Printable View
Jep i wuld like to know how they oc compaired to a XT. But i realy whant this card to last until the R580. Thats where i whant to spend my 600$ on. Not a XT that only has higher clocks. XT cards wel max out at like 722 mhz. @ stock voltage / cooling. Lets hope my XL is good for 700 :DQuote:
Originally Posted by mR Yellow
True, im not OCing antmore till beta10 comes out. I need the voltage to be profiled + better arti scanning.Quote:
Originally Posted by deathman20
I heared mem voltage is not working. And what abut the artifact scanning ? is it better than beta 9 ? there i would not work @ all. Artis @ stock voltages.Quote:
Originally Posted by mR Yellow
its working, otherwise i couldnt get mems over ati tool to 680, it was needed to have 2.1V nearly for that :-)
Apart from the extra ram the XT aint worth it.Quote:
Originally Posted by Astennu
Its working ;)Quote:
Originally Posted by Astennu
Im hoping Beta10 will be good :slobber:
At that price...($250 above) its definitely not. Check the online deals section for a link to a brand new Connect 3d X1800XL on Newegg for the lowest price yet: $349 :)Quote:
Originally Posted by mR Yellow
SO whats the average oc on air most ppl are getting on this card ? Enough for 9k 05 ?
Perkam
Well, im getting 9k with my XL, so i guess i see no need for a XT. :p:Quote:
Originally Posted by perkam
Intresting.. cool to know :) What about 05? Wish I could get a PCI-E sound card, and drop the video card lower in the case so I can cool my northbridge with better cooling easier.Quote:
Originally Posted by spajdr
Ya mem voltage is working in the released beta 9. I was the one that was saying it wasn't working. Well that was when I was playing with OC tool at the same time too, where it showed on there 1.8V. And ATITool actually has the correct voltage for the memory, what you set it too is actual voltage on the chips or very very close too.Quote:
Originally Posted by Astennu
Vcore was off on mine a little but hoping someone with a DMM can test that also against the ATITool voltage set. I ended up being ~.01v lower then what ATI tool set it for.
9,118 so far ;) And im sure I can get more out of the memory with the right voltages hehe. Core who knows anymore, thats trickier then the memory.Quote:
Originally Posted by perkam
625/650 w/ 1.25/1.95/1.95
I know 1.225/1.938/1.938 seems to work also but I havn't tested it 100% with a stable CPU and game testing.
got the card in. Its differtent from my last one. It has a bigger fan. + It now has a ruby sticker not an alien.
Testing card nog. Arti scanning dous not work. I alwa's get arties @ speeds higher than 550. No matter the voltage. Ik think its still bugged ?
Mem is not as good as my last card. 650 gave me instant problems. But i will try some more totday.
Inital testing gave me 550-600. Looks good for 15 min NFS MW. 575-600 gave me lockups. All stock volts. Only a bit higher fan speeds like 60-70%.
But it seems that this is not a good clocker.
Getting that on stock volts is impressive. Raise the volts up and see how it clocks then. Just because it can't do 575/600 stock doesn't mean it will be a good clocker or not.Quote:
Originally Posted by Astennu
Turn up the volts, and show us what its got :)
And ATITools artifact scanner is not working 100% yet so don't trust it.
Jep done that. Stock now is 560-612. If i try 625 i get withe artis all around the place. So i whent to 1.987v. Testing 650 now.Quote:
Originally Posted by deathman20
Hitting the max on the ram allready :( 650 is the max @ 2.0v. Now testing the core. I'm gonna look for that good old gecube bios.
That one game me an insane max op 820 on the memory. or maybe extra cooling would do the think. That 820 run was with the Vf700 so the heat of the gpu was not trancfered to the memmory chips.
Edit:
Running 600-650 now @ RTHDR-IBL. Voltages 1.150v and 1,987. All seems good its running for 20 min now temp stressed = 65c fan speed 64%. That new fan seems to help :)
Yeah very nice clocking.
I have a X1800XT coming, im gonna want to overclock it on the stock cooler, can i expect some decent results. Also how do you change voltages?
I have the same voltage bug as last time :( 1.25 = lock up.Quote:
Originally Posted by Hicks
Yes you will have good oc't. But you will not need extra voltage. Te stock voltage can hit 700-720 for the core. But you can change it with the latest ATi tool 0.25 Beta 9.
Maybe i should buy a XT board :\
My max for now is 610-649 @ 1.150 and 1.987 v. If i go higher on the core i get lockups. Voltage douse not work. And on the memory i get massive artifacts.
MR Yellow can you send your HiS bios to me ? I want to try it.
astennu91[AT]hotmail.com
I just got my X1800 XL and its having trouble OCing, i can't get the memory up at all (even a 5 mhz increase causes it to instantly reboot) and the core wont be stable at 625 w/out higher voltage and w/ higher voltage it locks up and reboots... im using the driver heaven OC utility w/ a BBATI card.. any ideas to help me?
Interesting if i get more then 65C with 700Mhz GPU it starts to hiccup in WOW more and more, randomly, until it stuck and reset adapter to default setting, so is it high temperature the problem? Surely 70C+ is alot, zalman cant keep up.
l337x3ricx : try ati tool 0.25 beta 9
allright ill give it a try... *crosses fingers* oh and in ATI tool what voltage should i set it to?Quote:
Originally Posted by spajdr
1.2V/1.975V/1.975V 600/600
last two voltage maybe dont need so high to be set, but better be sure :-)
yeah, ran ATI tool, the 3d thing ran for about 2 seconds... beeped and then the comp rebooted... i think i have some seriously crappy ram as it can NOT get past 495 mhzQuote:
Originally Posted by spajdr
sounds like you got 2ns RAMs :-(