AMD Newark 3700+ @ 3105.1MHz Air-Cooled

Printable View

Show 100 post(s) from this thread on one page

10-06-2005, 09:22 PM
cmay119

Quote:

Originally Posted by aldamon

Hey does anyone know if the DFI Infinity NF4X is compatible with Newarks?

Also, when are we going to see the Newark 4000+ in action?

I'm not sure if the Infinity is, I would just dft.com.tw and see if they have a BIOS that supports Rev E chips. Perhaps a BIOS that supports REV E6 Semprons.
As for the 4000+ I personally haven't seen one. The most I could find was this 3700+ which is quite a nice chip thus far. Although I've brought it all the way upto 1.65v and I still can't break that 3.0GHz Mark. I was however able to memtest86 and pass at 250 with my mem on a 9/10 Divider 2-2-2-5 @ 3.0v. I'm scared to give this chip 1.7v The board will post at 250MHz 1.65v but will not boot into windows. Keep getting the "Verifying DMI Pool" screen Until I hard reset the machine. I'm running at 1.5v with VID special set to auto, running at 2760MHz right now. Dunno if computer is stable with these clocks at 1.45v will be doing some more testing in the coming days.
10-06-2005, 10:25 PM
[cTx]Philosophy

I tried 6-23 was a no go for my dimms as well, My sticks in dual channel here are good for 254 2.5-3-2-5 but my cpu will only allow 2.5 on 1.35
currently im priming dual at 1.3v 2400 mhz hopin shell give up a few more hz after some burn time..
dual stress priming at 32 :P
I would have to say out of all the newarks ive came across or read about you definately have the best one Learners, I cant beleive you dont wanna be in the 3gigz club bro, thats all I wanted from my chip and she would only do it in memtest for me, no windows for that girl..the most she ever saw was maybe the window blinds :)
10-08-2005, 04:58 PM
cmay119

Quote:

Originally Posted by Philosophy

I tried 6-23 was a no go for my dimms as well, My sticks in dual channel here are good for 254 2.5-3-2-5 but my cpu will only allow 2.5 on 1.35
currently im priming dual at 1.3v 2400 mhz hopin shell give up a few more hz after some burn time..
dual stress priming at 32 :P
I would have to say out of all the newarks ive came across or read about you definately have the best one Learners, I cant beleive you dont wanna be in the 3gigz club bro, thats all I wanted from my chip and she would only do it in memtest for me, no windows for that girl..the most she ever saw was maybe the window blinds :)

LOL, agreed philosophy. I'm in the same situation as you. 3.0GHz, will boot memtest, but no windows. How high did you take it in volts to try to touch 3.0GHz? I wen't all the way upto 1.65v, but too scared to try 1.7v on air cooling.
10-08-2005, 07:25 PM
[cTx]Philosophy

same as u 1.65
and onbly for a few secs
I usually kept mine at 2760 with 1.54
but right b4 i sold it the buyer wanted 2.9
so i ran it usually at 1.6 for about a week to try for 2.9 but most i could prime stable at was 2880 which is pretty close
10-08-2005, 07:31 PM
ozzimark

Quote:

Originally Posted by cmay119

Hey ozzi, were you able to fix the "IDE RAID Detect" issue with you Newark? Every once in a while whether changing something in the bios or just booting/rebooting I'll get that error on occasion. I'll let the computer not find a RAID and then it will reboot and usually will then boot to the OS. Kinda annoying though, when fiddeling with Ram timings for that to come up when I just want to get into memtest lol.

not really. it was definitly memory related though. just go through and mess with the secondary timings. the newark was.. very picky from my recollection ;)
10-08-2005, 07:34 PM
[cTx]Philosophy

I agree with that ozzi one thing I know for sure is mine loved the bh-5s
10-13-2005, 12:41 PM
leo5111

just thought id let everyone know turions are at newegg from mt-30 to mt40........http://www.newegg.com/Product/Produc...82E16819103524
10-15-2005, 03:31 AM
Malachia

guys nobody tried turion on desktop boards?
10-15-2005, 05:23 AM
celemine1Gig

Quote:

Originally Posted by Malachia

guys nobody tried turion on desktop boards?

Exactly the question that I wanted to ask right now. What about a Turion ML-32? Anybody even tried overclocking one yet? :confused: Vandi, I thought you already had some Turions. Didn't you give at least one of them a try in terms of overclocking?
10-17-2005, 06:27 PM
ozzimark

they have been played with.. if you do some poking about. vandi himself uses (used?) a turion with his asus. the newarks seemed to be a bit more cost effective and clocked better though
10-18-2005, 04:03 AM
celemine1Gig

Quote:

Originally Posted by ozzimark

they have been played with.. if you do some poking about. vandi himself uses (used?) a turion with his asus. the newarks seemed to be a bit more cost effective and clocked better though

Thx for your anser ozzimark. So, I'll see if I can find a turion here. Should be fun to play with anyway.
10-18-2005, 09:39 PM
TurkeyFace

Newark Core? Is that the +3700 socket 754 code name?
10-19-2005, 03:08 PM
cmay119

Quote:

Originally Posted by TurkeyFace

Newark Core? Is that the +3700 socket 754 code name?

Newarks are the newer Rev. E5 CPU's for the Socket 754 Platform. They replace the DTR Clawhammer core CPU's. While the Lancaster (Turion) CPU's replace the Mobile Clawhammers. Both the Newark core and Lancaster core are 90nm in relation to 130nm of the clawhammer. Newarks are pretty much a San Diego core CPU in socket 754 clothing. Hope that helps. :)
10-19-2005, 03:14 PM
TurkeyFace

o so its a 754... ok..that's all :)
10-19-2005, 08:39 PM
learners permit

WOW Ozzi nice clocks on that opty. How hot is that thing running?
10-19-2005, 08:52 PM
ozzimark

very very hot in that shot in my avatar. max stable is actually around 2.85ghz. dunno how i was able to get an extra 450mhz out of it to make that screen with ;)
10-20-2005, 08:42 PM
learners permit

I'd like to see 1 of those under phase cooling.
10-27-2005, 05:45 AM
beta67

#0, ozzimark, fantastic overclock!

I know you've moved on to another platform, and this thread has been hijacked, but what was the OPN for the skt3700 CPU you used in this thread? I know it says Newark in title, but do you have the OPN?
10-27-2005, 07:27 AM
ozzimark

you can barely make it out in the picture in the first post:

http://www.xtremesystems.org/forums/...chmentid=29756

AMN3700BKX5BU
CABSE 0515DPMW
10-27-2005, 07:45 AM
Shadowmage

Quote:

Originally Posted by celemine1Gig

Exactly the question that I wanted to ask right now. What about a Turion ML-32? Anybody even tried overclocking one yet? :confused: Vandi, I thought you already had some Turions. Didn't you give at least one of them a try in terms of overclocking?

Turions aren't so good at OCing due to thicker gate oxides.
12-30-2005, 07:04 AM
vector7

The 4000 Newarks are HERE!!! :banana:

Well the 4000's finally made it!!! They have a different core than the 3700's in that they are 35w vs 62w. Can they go above 3k on air???
Has any tried one yet??? :)
v7

http://www.newegg.com/Product/Produc...82E16819104257
12-30-2005, 07:35 AM
ozzimark

they made it to retail, vandi had access to them a lonnng time ago :D

also, i think 3ghz should be doable without too much trouble, esp considering the CAB2E stepping newegg shows :toast:
12-30-2005, 08:57 AM
vector7

Cool...
I just ordered one for one of my UT250's...:)
What type of voltage should I run it at?
12-30-2005, 08:59 AM
ozzimark

somewhere around where the rest of the revE's run at? :cool:

try ~1.55-1.65v if you can keep temps down
01-11-2006, 04:40 PM
aldamon

Quote:

Originally Posted by vector7

Cool...
I just ordered one for one of my UT250's...:)
What type of voltage should I run it at?

How'd the AMN4000BKX5BU do?

Show 100 post(s) from this thread on one page