Nice job GrossmeisterB.:up: Thanks for sharing the details regarding your wiring of the nine fans on the MO-RA. That sounds like a good idea.
Printable View
Nice job GrossmeisterB.:up: Thanks for sharing the details regarding your wiring of the nine fans on the MO-RA. That sounds like a good idea.
No problem guys! :-)Quote:
Originally Posted by ShoNuff
I got them all hooked up to an mCubed "FanAmp", but they're not temp-controlled in any way, they just run at the lowest speed possible - it's more than enough, even for my o'ced Q9300 and o'ced 9800GTX :D
Thank you very much!! The stand was the most difficult part on this one I think, the fan frame wasn't that hard to build, but a lot of holes to drill :-)Quote:
Beautiful build GrossmeisterB! You have some talent I see. Nice stand you built for the rad. Very clean!
My current setup:
Dual Loop Cosmos S
http://i611.photobucket.com/albums/t...l/100_1243.jpg
Going back to tri-sli in July:
http://i611.photobucket.com/albums/t...l/100_1164.jpg
Don't be surprised if I post a new build log on this site.
Thats some nice builds you guys got :)
hey guys, this is my first build and first Watercooled system
http://i235.photobucket.com/albums/e...d/DSC04900.jpg
http://i235.photobucket.com/albums/e...d/DSC04899.jpg
http://i235.photobucket.com/albums/e...d/DSC04891.jpg
http://i235.photobucket.com/albums/e...d/DSC04902.jpg
(rad is mounted on the right side panel)
more pics:
http://i235.photobucket.com/albums/e...h_DSC04897.jpg
http://i235.photobucket.com/albums/e...h_DSC04895.jpg
http://i235.photobucket.com/albums/e...DSC04868-1.jpg
http://i235.photobucket.com/albums/e...DSC04870-1.jpg
http://i235.photobucket.com/albums/e...h_DSC04874.jpg
http://i235.photobucket.com/albums/e...h_DSC04903.jpg
Update of waterloop by adding a hot 4890 BE and new metal springs to prevent bending on short corners :)
http://nietbelangrijk.nl/download/file.php?id=3210
http://nietbelangrijk.nl/download/file.php?id=3211
@ TRG
like the build. Nice blue :up:
Finished putting this togeather back around April.
Intel Core i7 975 Extreme
Asus Rampage II Extreme
12GB Corsair DDR3 clocked to 1800
Dual Nvidia GTX285 SSC in SLI
Cosmos S Case: Liquid cooling via D5 based pump with 3x120 and 1x120 rads.
http://i96.photobucket.com/albums/l1...g/CIMG0002.jpg
http://i96.photobucket.com/albums/l1...%20Rig/002.jpg
http://i96.photobucket.com/albums/l1...g/CIMG3920.jpg
http://i96.photobucket.com/albums/l1...g/CIMG3927.jpg
nice build :up:
love the fan grills behind the mesh :)
Nothing too impressive, but here's mine all the same. Got all of the parts at sidewindercomputers.com; Gary is great to work with!
http://www.unc.edu/~jpurvis/images/comp/24.jpg
http://www.unc.edu/~jpurvis/images/comp/26.jpg
http://www.unc.edu/~jpurvis/images/comp/13.jpg
http://www.unc.edu/~jpurvis/images/comp/30.jpg
here is my first watercooled pc.
PC
COOLERMASTER COSMOS S
I7 975(NEW)
6X2GB OCZ PLATINUM 7-7-7-24 1600MHZ
ASUS P6T DELUXE
2XSAPPHIRE 4870 TOXIC 1GB DDR5 CROSSFIRE
CORSAIR 850W
1 RAPTOR WD 300GB
1 WD CAVIAR BLACK 500GB
SAMSUNG T240HD
MICROSOFT WIRELESS ENTERTAINMENT 7000
JBL SPYRO PINK
UPS MUSTEK 2000VA
WATER COOLING
SWIFTECH GTZ
MCR320
MCR120
2XSWIFTECH MCP655 PUMPS WITH DETROIT THERMO TOPS
C&C COMPLETE BLOCKS(2.ONE MOSFET ONE NB-SB)
2XEK 4870 WATERBLOCKS
EK 250 RESERVOIR
A LOT OF BITSPOWER
TRUE SILVER COMPRESSION BP FITTINGS
3 DELTAS PFB 5500RPM 252CFM 120X38MM PUSH ,AC RYAN BLACKFIRE4 95CFM 1900RPM
2XSCYTHE KAZE MASTER
CORSAIR MODULE BLOWER
TYGON TUBING 1/2 X3/4 R3603
PRIMOCHILL ANTI KINK COILS
ALL CABLES SLEEVED BY ME
PS THE PHOTOS HAVE LOW RESOLUTION.
PHOTOS
http://img9.imageshack.us/img9/1687/dsc00067obg.jpg
http://img22.imageshack.us/img22/6217/dsc00068wsz.jpg
http://img31.imageshack.us/img31/5117/dsc00069bqe.jpg
http://img4.imageshack.us/img4/525/dsc00070qqz.jpg
http://img4.imageshack.us/img4/5307/dsc00071fxf.jpg
http://img4.imageshack.us/img4/3745/dsc00073rln.jpg
http://img4.imageshack.us/img4/5403/dsc00074twu.jpg
http://img4.imageshack.us/img4/2122/dsc00075rwcvea.jpg
http://img7.imageshack.us/img7/5956/dsc00077nyy.jpg
http://img37.imageshack.us/img37/9756/dsc00078f.jpg
http://img37.imageshack.us/img37/29/dsc00079xql.jpg
all photos
http://img9.imageshack.us/gal.php?g=dsc00067obg.jpg
I like the orange'n blue look.
I think you're only supposed to post 4 fs'd pics in this thread though. :p:
my new cases and koolancd watercooled build COOLER MASTER Stacker 830 :D
http://img20.imageshack.us/img20/2286/ken7582.jpg
http://img7.imageshack.us/img7/70/ken7585.jpg
http://img40.imageshack.us/img40/545/ken7590.jpg/
http://img20.imageshack.us/img20/3755/ken7594.jpg
Sleeved tubing always looks incredible.
LonghornN super clean!
:up:
I love the size of the Cosmos S. I have 6 UV lights which is what causes a good bit of the glow on the UV reactive fans, coolant, and tubing. It really inst that bad with just the lights from the fans (11 of them in this thing) since most are behind the black mesh.
I hope to get some high res shots soon, but need a new camera. My current one wont play well with vista.
Thanks :)Quote:
Originally Posted by Liderc
Thanks illidanQuote:
Originally Posted by illidan
Thanks MomijiTMOQuote:
Originally Posted by MomijiTMO
They are undervolted with a black Scythe Kama Meter to 2000 RPMs so they aren't very noisy. At max speed they pull 52 dBa and 141 CFM.
e8600- thermalright xwb-01
HD4870 (next week GTX280)- DD maze4 gpu moded
nexxxos III rev.2 + 3x magma @ 680ot.
black ice gtx 120mm + 1x 120mm @ 680ot.
swiftech micro res
MCP355 + xspc top
silicon 10/15mm
http://img517.imageshack.us/img517/5489/p6230429.th.jpg
http://img41.imageshack.us/img41/9868/p7020432.th.jpg
it is still finalizing :rofl:
System Spec:
Coolermaster ATCs 840
Skulltrail MB
2x QX9775 CPU
2x 2GB Hynix FB RAM
ZOTAC Quad Sli 295's
Coolermaster Real Power M1000 Modular PSU
ZOTAC Nitro
Watercooling:
Custom CPU & NB Blocks
ZOTAC Infinity GPU Blocks
HWLabs 360 X-Flow SR-1 Radiator
HWLabs 240 SR-1 Radiator
2x Typhoon III Reservoir / Laing D5
Tygon 7/16" Hose
Bitspower 7/16" Fitting
http://www.coolercases.co.uk/zotac_m...zotac_1002.jpg
http://www.coolercases.co.uk/zotac_m...zotac_1001.jpg
http://www.coolercases.co.uk/zotac_m...zotac_1000.jpg
http://www.coolercases.co.uk/zotac_m...mochill_11.jpg
That custom paint job is tops! :up: Love it.
Nice Work :up:
But are you only using a Dual Rad für 2 GTX295?
coolmiester, that case looks killing. Everything is well designed, painted. Really great work. Just like all your other cases.