HOT | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | HOT

Printable View

Show 100 post(s) from this thread on one page

11-11-2009, 08:49 AM
cstkl1

Quote:

Originally Posted by SAE

Great, buddy.^^ :up:
7-8-7-21 also was my most stable timing combination. Too bad you cannot max out performance, but it's not that big of a loss anyway. :)
For benching one can tighten timings much more. That's^^ a pleasant 24/7 setting. :D

i am pretty sure u had face the same issue as me

7-7-7-24/28 is inconsistent
7-7-7-20 also is inconsistent

7-8-7-21 is consistent

still wondering y is that so.
IMC is like struggling or some skew issue with the bandwidth required?/
11-11-2009, 09:13 AM
eva2000

Same with very old Corsair GT 2000C7 loves 7-8-7-x, but no good at 7-7-7-x heh.
11-11-2009, 01:59 PM
Gautam

1 Attachment(s)

Well George, this one stick I found in a brand new set of 2000C7GT would prove that notion false. :eek:

Only 1.76V :eek:
11-11-2009, 02:08 PM
dinos22

what about 32M hahaha

sweet mother of ..... :D

what about the rest of them heh

george my sticks like 7-7-6-20 too hehehe
11-11-2009, 03:18 PM
Gautam

That will come, just whipping thru some quick testing ATM...you know the drill. :p:

That stick is pretty much a freak. The second best does 1104, but the third unfortunately gets stuck at 1085, which is more typical. So if I put all 3 of them together for 32M I'd probably be around 1070. Best 2 probably 1090. Still not bad without the "Dino treatment" of 1.85v+ and LN2. :)
11-11-2009, 03:22 PM
BenchZowner

Dino man, what's the max voltage you've put through the new elpidas ? ( MGH-E )
11-11-2009, 04:40 PM
Gautam

1 Attachment(s)

Just checking...this isn't exactly typical is it? :S
11-11-2009, 04:49 PM
chew*

Quote:

Originally Posted by Gautam

Just checking...this isn't exactly typical is it? :S

Nice gautam :)

Those timings look semi familiar.

I have the other 2 sticks to make a matched set :p:
11-11-2009, 05:18 PM
dinos22

Quote:

Originally Posted by BenchZowner

Dino man, what's the max voltage you've put through the new elpidas ? ( MGH-E )

on P55 1.9v
X58 1.84 tested but my sticks like 1.76v so thats where they sit :)

G is giving me ideas lol ... test all 5 sticks and find the best 3 :rofl: (been too lazy to do it yet hehehe)
11-11-2009, 05:20 PM
Gautam

Quote:

Originally Posted by dinos22

G is giving me ideas lol ... test all 5 sticks and find the best 3 :rofl: (been too lazy to do it yet hehehe)

1 stick at a time is the only way to do it. :p:

(But 1 32M per stick is a bit too timely lol)

I think the more appropriate question is what temperature were you at at 1.9v? But this is BenchZOwner we're talking about, if you say you ran 1.9v on LN2, he'll surely run 2.1v on air. ;)
11-11-2009, 06:17 PM
chew*

Quote:

Originally Posted by Gautam

1 stick at a time is the only way to do it. :p:

(But 1 32M per stick is a bit too timely lol)

you should try 1 32m per stick at a time on AMD.......:shakes:
11-11-2009, 06:36 PM
dinos22

max air volts for P55 kit was 1.86v > ambient around 20C

tried 1.9+ with LN2 on sticks
11-11-2009, 10:41 PM
Gautam

1 Attachment(s)

My eyes...they have got to be going bad. They are, aren't they?
11-12-2009, 12:43 AM
erickwok

Quote:

Originally Posted by Gautam

My eyes...they have got to be going bad. They are, aren't they?

Hi Gautam

very nice ram:clap:, could you tell me which motherboard you used for testing?

many thanks!
11-12-2009, 02:33 AM
dinos22

picks up jaw off the floor

i'm guessing he's on Giga P55-UD6 no?
11-12-2009, 03:14 AM
BenchZowner

Quote:

Originally Posted by Gautam

I think the more appropriate question is what temperature were you at at 1.9v? But this is BenchZOwner we're talking about, if you say you ran 1.9v on LN2, he'll surely run 2.1v on air. ;)

Haha, that's so typical of me :D
2.1V on air damn straight :rofl:

Quote:

Originally Posted by dinos22

max air volts for P55 kit was 1.86v > ambient around 20C

tried 1.9+ with LN2 on sticks

Thanks for the info ;)

Quote:

Originally Posted by Gautam

My eyes...they have got to be going bad. They are, aren't they?

Go on, go on, there's more juice in it :)

Quote:

Originally Posted by dinos22

i'm guessing he's on Giga P55-UD6 no?

Yeap, he's going for the 3D Mark2001SE WR on P55 :D ( massman anybody ? :D )
11-12-2009, 08:19 AM
cstkl1

http://i287.photobucket.com/albums/l...Untitled-2.png
11-12-2009, 08:33 AM
Gautam

^^Heh I guess even 1.7v can be overkill

Quote:

Originally Posted by dinos22

picks up jaw off the floor

i'm guessing he's on Giga P55-UD6 no?

Yes it is and unfortunately it seems like while it was sitting in a drawer for the past month it lost it's ability to run dual channel. :brick: :shrug:
11-12-2009, 10:51 AM
chew*

Quote:

Originally Posted by Gautam

^^Heh I guess even 1.7v can be overkill

Yes it is and unfortunately it seems like while it was sitting in a drawer for the past month it lost it's ability to run dual channel. :brick: :shrug:

If you need a spare let me know ;) mines getting lonely and collecting dust, no time to play with and I have the ud4p if I need to do any testing.
11-12-2009, 01:25 PM
dinos22

lol dude
reseat your CPU
surely you didnt kill another one :rofl:
11-12-2009, 02:21 PM
proxis

lol about the subs, trfc over 100 and singlechannel isn't really serious :D
also, from my experience with p55 - you can pass lobbies higher than you can pass everest which is kinda 1m stability level really
how much voltage for cl6 and cl8 runs? something tells me its not 1.76v ... :D
11-12-2009, 02:28 PM
chew*

Quote:

Originally Posted by proxis

lol about the subs, trfc over 100 and singlechannel isn't really serious :D
also, from my experience with p55 - you can pass lobbies higher than you can pass everest which is kinda 1m stability level really
how much voltage for cl6 and cl8 runs? something tells me its not 1.76v ... :D

heh i'm sure he had had more than 1m stability.

I ran into a clock wall with mine, sure they would go higher.

http://chew.ln2cooling.com/qdig-file...%203525mhz.jpg
11-12-2009, 02:41 PM
Gautam

Quote:

Originally Posted by proxis

lol about the subs, trfc over 100 and singlechannel isn't really serious :D
also, from my experience with p55 - you can pass lobbies higher than you can pass everest which is kinda 1m stability level really
how much voltage for cl6 and cl8 runs? something tells me its not 1.76v ... :D

Never higher than 1.76. And heh, I was waiting for someone to say something about the single channel and just lobby high. It's single channel because I test every stick individually first. Lobby High is my preference, because I'm primarily a 3D bencher above everything else, and if it passes LH, it passes everything 3D 95% of the time. This is just my personal pretesting procedure for RAM. This time around, the results on a couple of the sticks happened to be spectacular, so I'm sharing. Not claiming any wr's or anything. Yeah, the subs are all auto, once again, because this was all from me just pulling the ram out of the box and seeing what it could do.

Quote:

Originally Posted by chew*

heh i'm sure he had had more than 1m stability.

I ran into a clock wall with mine, sure they would go higher.

Never imagined they could be this strong at trcd 6. My old set struggled to even reach 900. Didn't like it one bit. I don't know what Corsair's doing now, but it's good. :D
11-12-2009, 02:51 PM
chew*

Yah they are certainly rocking out, since I ran into a clock wall I just tightened everything up, TRFC was at 90 ns as well.

Those are the 1866 c7 bin

Been trying to get a set of the AMD 2x2g kit to see how well they rock but it seems they are "rare"
11-12-2009, 02:57 PM
Viss

Nice clocks guys. Chew what vdimm u set for the 940mhz C6?

Show 100 post(s) from this thread on one page

*HOT* | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | *HOT*

HOT | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | HOT