Printable View
well heres my results from my new e6300. the batch number is Q649A178. im not sure wuts holding me back yet i will have different ram to try very soon. it goes a couple mhz above 500fsb and the system locks and i have to restart it no blue screens or nothing just a simple lock up so please let me no wut you think about that.
vcore: 1.7v, 1.76v doesnt help
mch: 1.45v, 1.55v doesnt help
fsbv: 1.4v, 1.5v doesnt seem to help
very loose timings 5-6-6-20 at 2.20v all memset subtimings are very loose
anybody try this pencil mod on there 965pt yet. i might try it myself.:) . if u did try it wut was the out come.
What pencil mod?
i will confirm that the vdimm pencil mod works great for me. go up to 2.3v with no problems. didnt try any higher so thats up to you. made my memory hit ddr1100 cas 5.:) :D heres the link i stumbled across.
biostar tforce 965pt pencil vdimm mod:
http://www.pcmoddingmy.com/e107_plug...hp?content.390
have fun!:D
Hey guys, just a quick question i was hoping one of you could answer for me. Im using the latest bios on Rebel Haven currently.
I have a Biostar 965PT w/ a E6300. I currently have it at 1.225v at 401*7 = 2800mhz. The system is completely rock stable at this setting and i can stress test it all day and play any game i want and nothing goes wrong. Here is where the problem begins however. Using Memtest i test the memory all the way up to 450mhz and it runs the test multiple times without any sort of problem. At 430*7 with 1.275v it can run Orthos all day without any problem, can do any Super PI measurement, etc. However the moment i start a game (such as F.E.A.R. or Company of Heros) the game will freeze within a minute or two. Hard lock kinda freeze. The ram is good up to 450, im running it at 430, its orthos stable at 1.2625v i have it at 1.275v, etc.
I thought it was power at first, however a new Crucial HX620 power supply didnt help the situation. Im not really complaining about this, i just have NO clue what the problem is and was wondering if you guys had any ideas. Thanks. Im figuring its a Bios issue, like maybe the PCI bus not being locked, but i assume its locked all the time (PCI-E bus is locked at 100).
Also - does this board support Quad Core? Havent seen an official response. Thanks.
Have anyone tried vista? I could not overclock to a mere 300fsb when I install vista. Vista will not install/boot
IF you running Visa 64 bit edition, your cpu will most likely need more voltage. I've heard of this occurring on both AMD, and Intel processors.
my board will boot at 449fsb stable and 450 no boot and dont know why. but i can clockgen up no problem. my cpu seems to be wuts holding me back. i gained a few mhz from chilled water but cpuz validator seems to be not working right now so i cant post the results yet. but heres a screen of 500fsb. and im not to sure about this new stepping and revision.
I got the exact same no boot at 450fsb but 100% stability at 449fsb problem from the official 103 bios too. Stilts bios is fine for me to boot 450+ though so I'm still sticking with that. :toast:Quote:
Originally Posted by natedog420
what did you set for clock generator in clockgen?
the pll is ICS 9PLRS509 :toast:Quote:
Originally Posted by Caubecari
caubecrai@ u need clockgen 1.0.4.8 and pll is ICS 9PLRS509 and it works perfect for me.
melymel2789@ i was using the official 103 and i have the 103rh bios. but i read somewere that there was a number 2rh bios. im not sure but could u plz post the name of the bios u have. thanks
It's just the one that stilt used for the 530fsb screenie in the first post:Quote:
Originally Posted by natedog420
:toast:Quote:
Originally Posted by Pt1t
All the Rebels bios's are here including Stilt's:
Rebels Haven P965 Deluxe BIOS Download Page
Rebels Haven 965PT BIOS Download Page
Is it safe for me to be running this board at 500 fsb with the stock northbridge cooling? Just got done stress testing it but dont know if i should keep it there.
Feel the heatsink and you should know. Try not to get burned.:)
Well its hot, very hot, but not what id call burning.
Wouldnt keep my finger on it though.
is the deluxe version available in canadian market?
well i dont have a insane fsb but i did the little mod to my e4300 to get it to boot at 266x9 stock and with my phase machIIgt it is doing very nicely with this board, a few problems though i cant use any ram divider higher then 1:1 when ocing (and i have the nice ddr1000 4-4-4-12 cellshock) which really bumms me out
the best bios's i have used are the havens mod 921 and 914 currenty trying the 914 and it seems pretty stable at 440x9 with 1.55 vcore, heres a quick 2 hour occt run i did with a 1m run
http://img341.imageshack.us/img341/7...hersvi7.th.jpg
I need some advice for cooling the northbridge on this puppy guys. The northbridge on my board literally just burned my hand when i touched it! Im at 490fsb 1.45mch in bios (1.65 actual reported). I really wish this board wouldn't overvolt like it does.
Put a fan over it or get a new NB heatsink:)
is it possible for me to take a fan and just kinda make it work on the old heatsink? Just take some screws and force the fan into it? What size fan would i need for that?
Just to verify, the boards used in this thread are the same as the board i've linked to below, yes?
http://www.newegg.com/Product/Produc...82E16813138037
Yep.Quote:
Originally Posted by Lurid
Newegg is out of stock. I wonder if they gonna get the new revision boards in.