if u listen to that fan on the website it sounds loud as...well loud. But maybe it was realy close. Those sound liek they would make sweet case fans
Printable View
if u listen to that fan on the website it sounds loud as...well loud. But maybe it was realy close. Those sound liek they would make sweet case fans
pretty funny i sold my 9800pro agp and bought the same graphic card as you :toast: so i spend something like 550 now and i really hope it works good because other it will be the first and last time i got a dfi mobo!Quote:
Originally Posted by HARDCORECLOCKER
edit:ust read what patrik wrote, so now you cant even get to the 4v in bios that dfi announced in teh beggining!!
2things are ust missing now, the 1st is that sli dont work and the 2th is that it only gives 1.7v to cpu over that the mosfets goes over 200c and catches fire...... :dammit: :grr: :slash:
GJ DFI! :up:
I wouldn't be surprised. The extra load on the 5v rail may make it nessicary for the 24pin connectorQuote:
Originally Posted by Patrickclouds
jjcom
I wonder how much your 5v rail would dip using that to power 3.6v on your ram plus have optical drives etc going.
Good point, maybe the board doesn't think your 5v rail is up to it which brings you back to a 20pin PSU possibly being the issueQuote:
Originally Posted by cantankerous
jjcom
i don´t need this high vdimm, because i´m using tccd modules.
i was just interested to see, if i can choose this
understandable. That is a good thing about the TCCD. Very low volts needed which is less of a strain on your board and psu, not to mention less heat dissipated.
:D Yeah - good choice for a middle priced GPU - the EXTREME is stock clocked 550/1120 and does 590/1340 without any problems and it's fan is not noisy.Quote:
Originally Posted by Snowman89
I never heard of flaming MOSFETS on DFI NF4 if You go above 1,7 Vcore - don't hope so, my FX needs 1,8 to be maxed out at 3.360....... :confused:
So all in all we spent the same ammount of money and share the same kind of hope.....
BTW, take a look at the MSI SLI DIAMOND thread - just somebody postet stable 9 x 355 :stick:
I hope DFI will not be a disapointment.
:toast:
Where'd you get the Leadtek Extreme version for 250?
:D NORSKIT Europe - 188 €, the product state was a long time "delivery unknown" and then suddenly overnight it went to "in stock" and I had good luck to catch one - 2 days later they're out again and now priced at 200 € and not in stock anymore.Quote:
Originally Posted by apu673
:toast:
you need to take vcore off auto and set 1.5 to 1.55 manually....then you will see upto 4V.Quote:
Originally Posted by Patrickclouds
make sure you flash to the 125 or 126 bios also.
:D O.K. - here we go for Europe, first see - first buy:
DFI NF4 boards
:toast:
:confused: Ähm, You have to set the Vcore manually to get a higher Vdimm ?Quote:
Originally Posted by bigtoe
Isn't that a little strange............???
:toast:
8 of 10 available ;)Quote:
Originally Posted by HARDCORECLOCKER
A buddy of mine and me just ordered two ;)
:toast:
Ya it's out of stock everywhere on U.S. sites also. What would be the next step down in terms of overclockability, Albatron or Chaintech?Quote:
NORSKIT Europe - 188 €, the product state was a long time "delivery unknown" and then suddenly overnight it went to "in stock" and I had good luck to catch one - 2 days later they're out again and now priced at 200 € and not in stock anymore.
Ordered one also =)Quote:
Originally Posted by HARDCORECLOCKER
:D lol :) , i meant that something like thats ust missing to start happend, if you understand what i mean :)Quote:
Originally Posted by HARDCORECLOCKER
:D Here SLI-D also in stock, SLI-DR and Ultra coming soon:
DFI NF4 SLI-D in stock
And here the first charge sold out but next delivery on 2005/02/03 and 04:
All DFI'S
:toast:
thanksQuote:
Originally Posted by bigtoe
now it works
the only thing is, that the vcore is selected except then "auto"
:D Back to the question where You can find a PCI-E LEADTEK 6600GT Extreme (Europe) - found 3 shops with it in stock:
6600 GT Extr.
and
6600 GT Extr.
and
6600 GT Extr.
:toast:
Seems to be a bios feature, kind of a protection against the ones who don't know what they're doing so that somebody who's not an overclocker, accidentally doesn't set it to 3.7Vdimm, for example ;)Quote:
Originally Posted by HARDCORECLOCKER
hi there, i got mine board on friday from HPM-Germany, bios version was from 19.01. tried over weekend my mushkin bh-5 / tccd's. something is holding me back. what's your max HTT with divider ? dont hope it's cause of the first revision.
psycho303
I'm starting to wonder if the NF4 chipset is just a poor overclocker. What I mean is, except for the best of the best overclockers, the rest of us are having a hard time with them. Seems all the current boards are flakey, they all have something.
i feel sorry for you guys. these new boards looked really good, finally you can ditch your crappy neo 2s, and now your having more bad luck.
the nforce4 is a crappy design but if anyone can work it it will be dfi.
if it wasnt for SLI, and fx 55 was on 754, then the LPUT nf3 would be everyones dream board