Printable View
urrrrmmm :( ok il will try it that way. i know last time i spent 30 mins and never did get the little wire in those damm holes :mad: :mad:
*edit* and to think those hole are freakin big compared to the holes on the new 64/FX series mb's!!! i cant even imagine that one :eek:
thx perc,
use a pair of tweasers and a flash light :p:
Chalk up another L12 mod. I have a 2500+ mobile that was stuck at 200 FSB on an NF7-S v2. Did the 133 -> 166 L12 mod and I'm now running stable at 220x11.5. Time to move the FSB up and see where it maxes out. The same components were running 227x10.5 with another 2500+ earlier, so I know the board and memory have more headroom. I'll add more later.
:toast: Glad to hear it!:thumbsup:
so it looks like the L12 is really helping with the mobile barton.
because the infinity does just fine with the mobiles
I have a Mobile 2500+ Barton and an NF7-S 2.0 board. With my 1700+ the L 12 mod (166 fsb from 133) worked connecting AH 28 to AH 30. But with my Mobile these mod doesnt work. I dont gain no mhz, but on the 1700+ it helped. So do I need to do the 200 mhz mod?
The L12 appears to work quite nicely on the NF7-S v2 + 2600+ XP-M
C
This is the ah 28 to ah 30 method? Before I have cleared the bios, first time it booted fine at 230 fsb (that was stable on 1700+), but after not finishing loading windows it didnt boot. I got a message at boot "I/O CHANNEL CHECK - CHECKING FOR SEGMENT,... Now I will trie to do the L12 mod again.
Does anybody now what that message means?
Hmm when i retried the L12 mod on the first boot I could only select user define setting, but after some boots I can select 3200+ Wtf is happening?? After the mod Ive cleared the cmos,... Maybe I need to flash the bios again? And why doesnt the 11x multi work? When I set to 11x and reboot it goes to 6x!!??
Now I have the d22 alpha r2 bios and the 11x multi works fine. :banana: :banana: :banana: :banana:ing 16 biios doesnt like the 11x multi. Now im prime stable at 228 fsb like I was with 1700+ and L12 mod ;)).
http://www.geocities.com/trats102002/nf7sFsbsense.html
I just tried to use the cpu pin method to get 200fsb, but that failed. I am now going to use the true L12 mod to get 200fsb default. Join 1 and 3 of L12 to get 200fsb. I have stuck some sinks of my twinmos Bh-5 and fed it with 2.98v but it still won't play it runs prime but crashes other apps running at same time. I played ut2k4, so you can see it is ever so slightly unstable.
Its got to be either the board or the RAM. I sold a perfectly good epox 8rda+ that did 200fsb so I really not happy running at 200fsb for complete stability. The vdimm mod looks too daunting to me I can barely see the surface mount resistor. I'd like to get a infinity but I hear of a lot of problems with them too.
Which method did you use on your mobile? I want to perform it on my 2500+ Hell-fire volt moded and got to post at 260 and in windows at 253 with his destop chip, my mobile won't go beyond 225 stable:(Quote:
Originally posted by charlie
The L12 appears to work quite nicely on the NF7-S v2 + 2600+ XP-M
C
Well did the pinmod and heres what I got:)
http://server5.uploadit.org/files/Mi...fterpinmod.jpg
15mhz boost with an 11 multi is no joke :toast:
so which of the L12 did you guys perform.... ?
ah30 to ah28 (133 --> 200)
OR
ag31 to ah32 and ah30 to ah28 (133 --> 166 --> 200)?
AFAIK there are two bit or digits giving a total possible different combinations of 4, and therefore there is not two ways to get to 200fsb default only "Quote:
Originally posted by bachus_anonym
so which of the L12 did you guys perform.... ?
ah30 to ah28 (133 --> 200)
OR
ag31 to ah32 and ah30 to ah28 (133 --> 166 --> 200)?
ag31 to ah32 and ah30 to ah28 (133 --> 166 --> 200)? "
isn't that what that guide says at geocities? to force 200 on 133FSB cpu - 2 wires but to force 200 on Mobile - one wire???Quote:
Originally posted by megatron
AFAIK there are two bit or digits giving a total possible different combinations of 4, and therefore there is not two ways to get to 200fsb default only
it looks like some people did that mod ( charlie used on wire ) and it worked... so which is correct then?
EDIT:Oh, i got it... :doh: basically, the only difference between 133FSB Mobile Barton and 200FSB Desktop Barton is 3rd L12... Desktop has it closed so same needs to be done to 133FSB Barton in order to be 200FSB...
in other words there's only one way for 133FSB Mobile - 200FSB! 166FSB can't be achieved unless one actually cuts #0 L12 and close 3rd L12...
ok, thanx.... so "ah30 to ah28" is the answer... case closed :)
I have connected ah 28 to ah 30 and get 166 fsb on a mobile 2500+, but the site says 200 mhz??
i just got it all figured out with that L12 mod and Mobiles :DQuote:
Originally posted by mare87
I have connected ah 28 to ah 30 and get 166 fsb on a mobile 2500+, but the site says 200 mhz??
weird... are you sure that u actually have mobile Barton and not unlocked desktop? look at the L12 bridges... if nothing is cut there, then it's desktop. if everything else is correct and after "ah30 to ah28" it defaults to 166FSB then it's like closing already closed bridge (assuming it's desktop)...
weird... still...
Here is how I did mine( Mobile 2500+)
http://www.logan.eclipse.co.uk/