Water Cooled Case Gallery

Printable View

Show 100 post(s) from this thread on one page

01-19-2008, 10:36 AM
rbsmontemor

Quote:

Originally Posted by disruptfam

with ice??? like dry ice?

Are u sure a droplet of water didn't fall onto the mobo looks like it would of...

that sucks dude

Just ice...frozen water :) Think that's not the problem...we disassemble the system to clean the water 5 minutes before :mad:

Quote:

Originally Posted by Vatos_locos

seems like the isolation is not good at all your block man hasw water everyware and the tape around the socket is not good for isolation :( i'am sorry

Thats just cold water...not DI or so, backside of CPU doesn't get wet

Quote:

Originally Posted by cka3o4nuk

this is expecter p5k delux has very bad (even not looking its 8 phase) power module (a lot of them dies with such troubles)

:down:

Quote:

Originally Posted by louie101086

maybe the condensation started happening under the cpu isnt that why people use dielectric grease under cpu to avoid problems like this

But if it happens, it will kill the CPU too, or not? my CPU is happily alive :D

Rbs.
:(
01-19-2008, 11:03 AM
Xilikon

If you heard a popping sound, it mean that a capacitor exploded. Look around the cpu area to see if you noticed a capacitor without the metal top. The P5K is known to do this sometime when you push the board a bit.
01-19-2008, 11:23 AM
The_Beast

That sound really bad
01-19-2008, 11:28 AM
Shocker003

5 Attachment(s)

I ain´t good at modding, so dudes laugh it off

Sorry dudes this is all i could come up with for now. It ain´t special like what i have been seeing in this thread but at least laugh it off;)
01-19-2008, 01:11 PM
NOFX

cka3o4nuk
Privet komrad! :D
01-19-2008, 01:49 PM
joecop120

Quote:

Originally Posted by Shocker003

Sorry dudes this is all i could come up with for now. It ain´t special like what i have been seeing in this thread but at least laugh it off;)

!! Are there holes cut in the case for the 3 fans on the radiator?!? Otherwise there is no airflow!:eek: :eek: :eek:
01-19-2008, 02:14 PM
HaGGaRd

someone needs a new monitor :D
01-19-2008, 02:16 PM
Shocker003

Quote:

Originally Posted by joecop120

!! Are there holes cut in the case for the 3 fans on the radiator?!? Otherwise there is no airflow!:eek: :eek: :eek:

:shrug:
It´s just one fan cutted into two halfs and there is enough space between the rad and the case:yepp:
01-19-2008, 02:22 PM
Evil-Vincent

LOL It looks just like you have a second set of fans on the other side of the rad.

I like your setup, its like I wanted to do mine initially, but decided to buy s TJ07 anyway.

What is that fan next to the cpu doing there? Cooling the ram?
01-19-2008, 02:26 PM
Shocker003

Quote:

Originally Posted by evil-vincent

LOL It looks just like you have a second set of fans on the other side of the rad.

I like your setup, its like I wanted to do mine initially, but decided to buy s TJ07 anyway.

What is that fan next to the cpu doing there? Cooling the ram?

Just mounted an 80mm fan on my D-Tek screws for cooling my ram.:yepp:
01-19-2008, 02:37 PM
CodeNinja

Quote:

Originally Posted by Shocker003

:shrug:
This is how i mounted my rad.:rolleyes:

Ohhh... thats clever! I like it. :up:
01-19-2008, 02:39 PM
rbsmontemor

Quote:

Originally Posted by Xilikon

If you heard a popping sound, it mean that a capacitor exploded. Look around the cpu area to see if you noticed a capacitor without the metal top. The P5K is known to do this sometime when you push the board a bit.

I check it today, but nothing looks wrong.

When I power on the mobo with an CPU, it's turn off on a half second...without CPU it keeps alive until I press the power button again :shrug:
01-19-2008, 02:58 PM
Shocker003

Quote:

Originally Posted by CodeNinja

Ohhh... thats clever! I like it. :up:

Thanks pal:)
01-19-2008, 04:29 PM
Xilikon

If you didn't notice anything, it mean it's either a capacitor died but not show any damage or any other component died.
01-19-2008, 05:41 PM
smee

Quote:

Originally Posted by rbsmontemor

I check it today, but nothing looks wrong.

When I power on the mobo with an CPU, it's turn off on a half second...without CPU it keeps alive until I press the power button again :shrug:

One thing i'd do is make sure the bios chip is in the motherboard completely.
I've heard that sometimes if your overclocking and you clock your cpu really high then the comp will just turn off and the mobo won't post. But then they find later that the bios chip came out, so they push on it until it clicks in. Then the mobo will post :up:

Not sure if thats the problem, but it's worth a try :)
01-19-2008, 08:32 PM
rbsmontemor

Quote:

Originally Posted by Xilikon

If you didn't notice anything, it mean it's either a capacitor died but not show any damage or any other component died.

I think that something on VRM died. Just when i put 1.65+ volts...

Bios -> set things -> save -> reboot -> 5 sec -> pof :shakes:

Quote:

Originally Posted by smee

One thing i'd do is make sure the bios chip is in the motherboard completely.
I've heard that sometimes if your overclocking and you clock your cpu really high then the comp will just turn off and the mobo won't post. But then they find later that the bios chip came out, so they push on it until it clicks in. Then the mobo will post :up:

Not sure if thats the problem, but it's worth a try :)

I'll try that now and let you know :up:

Rbs.
:rolleyes:
01-19-2008, 09:37 PM
smee

Quote:

Originally Posted by rbsmontemor

I'll try that now and let you know :up:

Rbs.
:rolleyes:

Let me know if it works :)

smee.
:wave:
01-19-2008, 10:03 PM
rbsmontemor

Quote:

Originally Posted by smee

Let me know if it works :)

smee.
:wave:

It's dead, a lot dead, all dead.

http://www.defesacivil.rs.gov.br/com...ro_privada.jpg

Ohh well, at least I'm waiting now for a DFI P35 to arrive :D

Will try RMA on P5K Deluxe. No vmod, nothing.

Rbs.
:mad:
01-19-2008, 10:08 PM
Nate P.

Is that the DFI P35-T2R or the Blood Iron?
01-19-2008, 10:11 PM
filthysanchez

http://i2.photobucket.com/albums/y10...zz016Small.jpg

I need to drain and do some stuff, but this is how it's sitting now(I mounted the hard drives in the top though)
01-19-2008, 10:29 PM
rbsmontemor

Quote:

Originally Posted by Nate P.

Is that the DFI P35-T2R or the Blood Iron?

P35 T2R :up:

Hope it clocks my Q6600 like the P5E3 did...510FSB prime and 525 Screenshot. Max prime stable was 480 on P5K deluxe.

Rbs.
:shakes:
01-19-2008, 10:55 PM
darkorb

dude, is ur HD just hanging there???
01-20-2008, 02:28 AM
cabbspapp

Quote:

Originally Posted by filthysanchez

http://i2.photobucket.com/albums/y10...zz016Small.jpg

I need to drain and do some stuff...

No kidding...
01-20-2008, 03:48 AM
Dig!taL

http://img262.imageshack.us/img262/7555/dsc05595bo9.jpg
http://img257.imageshack.us/img257/5223/dsc05594ya9.jpg
http://img244.imageshack.us/img244/7746/dsc05612cn4.jpg
http://img413.imageshack.us/img413/779/dsc05616dk1.jpg
http://img183.imageshack.us/img183/981/dsc05615dt2.jpg
http://img136.imageshack.us/img136/8019/dsc05601au5.jpg

:D
01-20-2008, 03:54 AM
Evil-Vincent

Very nice and clean, I like it ;)

Only down point is the 4 pin connector, not much to do about it though :(

Show 100 post(s) from this thread on one page