*****Official***** DFI NF4 ultra-D first look

Quote:

---

Originally Posted by HARDCORECLOCKER

:D True words my friend - for me it's even more to spend, I need a new PCI-E GPU because I'm still on AGP so I ordered a LEADTEK 6600GT EXTREME for about $250 plus price of the board - that's reality.

:toast:

---

pretty funny i sold my 9800pro agp and bought the same graphic card as you :toast: so i spend something like 550 now and i really hope it works good because other it will be the first and last time i got a dfi mobo!

edit:ust read what patrik wrote, so now you cant even get to the 4v in bios that dfi announced in teh beggining!!
2things are ust missing now, the 1st is that sli dont work and the 2th is that it only gives 1.7v to cpu over that the mosfets goes over 200c and catches fire...... :dammit: :grr: :slash:
GJ DFI! :up:

Quote:

---

Originally Posted by Patrickclouds

no, i cannot find memtest in the bios.
and it´s not possible to get more than 3,2vdimm in the bios.
i´ve placed the jumper to get 4vdimm, but i can only see 3,2 available
is the reason my 20 pin atx psu or is there something wrong wih this bios

---

I wouldn't be surprised. The extra load on the 5v rail may make it nessicary for the 24pin connector

jjcom

I wonder how much your 5v rail would dip using that to power 3.6v on your ram plus have optical drives etc going.

Quote:

---

Originally Posted by cantankerous

I wonder how much your 5v rail would dip using that to power 3.6v on your ram plus have optical drives etc going.

---

Good point, maybe the board doesn't think your 5v rail is up to it which brings you back to a 20pin PSU possibly being the issue

jjcom

i don´t need this high vdimm, because i´m using tccd modules.
i was just interested to see, if i can choose this

understandable. That is a good thing about the TCCD. Very low volts needed which is less of a strain on your board and psu, not to mention less heat dissipated.

Quote:

---

Originally Posted by Snowman89

pretty funny i sold my 9800pro agp and bought the same graphic card as you :toast: so i spend something like 550 now and i really hope it works good because other it will be the first and last time i got a dfi mobo!

edit:ust read what patrik wrote, so now you cant even get to the 4v in bios that dfi announced in teh beggining!!
2things are ust missing now, the 1st is that sli dont work and the 2th is that it only gives 1.7v to cpu over that the mosfets goes over 200c and catches fire...... :dammit: :grr: :slash:
GJ DFI! :up:

---

:D Yeah - good choice for a middle priced GPU - the EXTREME is stock clocked 550/1120 and does 590/1340 without any problems and it's fan is not noisy.

I never heard of flaming MOSFETS on DFI NF4 if You go above 1,7 Vcore - don't hope so, my FX needs 1,8 to be maxed out at 3.360....... :confused:

So all in all we spent the same ammount of money and share the same kind of hope.....

BTW, take a look at the MSI SLI DIAMOND thread - just somebody postet stable 9 x 355 :stick:

I hope DFI will not be a disapointment.

:toast:

Where'd you get the Leadtek Extreme version for 250?

Quote:

---

Originally Posted by apu673

Where'd you get the Leadtek Extreme version for 250?

---

:D NORSKIT Europe - 188 €, the product state was a long time "delivery unknown" and then suddenly overnight it went to "in stock" and I had good luck to catch one - 2 days later they're out again and now priced at 200 € and not in stock anymore.

:toast:

Quote:

---

Originally Posted by Patrickclouds

no, i cannot find memtest in the bios.
and it´s not possible to get more than 3,2vdimm in the bios.
i´ve placed the jumper to get 4vdimm, but i can only see 3,2 available
is the reason my 20 pin atx psu or is there something wrong wih this bios

---

you need to take vcore off auto and set 1.5 to 1.55 manually....then you will see upto 4V.

make sure you flash to the 125 or 126 bios also.

:D O.K. - here we go for Europe, first see - first buy:

DFI NF4 boards

:toast:

Quote:

---

Originally Posted by bigtoe

you need to take vcore off auto and set 1.5 to 1.55 manually....then you will see upto 4V.

make sure you flash to the 125 or 126 bios also.

---

:confused: Ähm, You have to set the Vcore manually to get a higher Vdimm ?

Isn't that a little strange............???

:toast:

Quote:

---

Originally Posted by HARDCORECLOCKER

:D O.K. - here we go for Europe, first see - first buy:

DFI NF4 boards

:toast:

---

8 of 10 available ;)

A buddy of mine and me just ordered two ;)

:toast:

Quote:

---

NORSKIT Europe - 188 €, the product state was a long time "delivery unknown" and then suddenly overnight it went to "in stock" and I had good luck to catch one - 2 days later they're out again and now priced at 200 € and not in stock anymore.

---

Ya it's out of stock everywhere on U.S. sites also. What would be the next step down in terms of overclockability, Albatron or Chaintech?

Quote:

---

Originally Posted by HARDCORECLOCKER

:D O.K. - here we go for Europe, first see - first buy:

DFI NF4 boards

:toast:

---

Ordered one also =)

Quote:

---

Originally Posted by HARDCORECLOCKER

:D Yeah - good choice for a middle priced GPU - the EXTREME is stock clocked 550/1120 and does 590/1340 without any problems and it's fan is not noisy.

I never heard of flaming MOSFETS on DFI NF4 if You go above 1,7 Vcore - don't hope so, my FX needs 1,8 to be maxed out at 3.360....... :confused:

So all in all we spent the same ammount of money and share the same kind of hope.....

BTW, take a look at the MSI SLI DIAMOND thread - just somebody postet stable 9 x 355 :stick:

I hope DFI will not be a disapointment.

:toast:

---

:D lol :) , i meant that something like thats ust missing to start happend, if you understand what i mean :)

:D Here SLI-D also in stock, SLI-DR and Ultra coming soon:

DFI NF4 SLI-D in stock

And here the first charge sold out but next delivery on 2005/02/03 and 04:

All DFI'S

:toast:

Quote:

---

Originally Posted by bigtoe

you need to take vcore off auto and set 1.5 to 1.55 manually....then you will see upto 4V.

make sure you flash to the 125 or 126 bios also.

---

thanks
now it works
the only thing is, that the vcore is selected except then "auto"

:D Back to the question where You can find a PCI-E LEADTEK 6600GT Extreme (Europe) - found 3 shops with it in stock:

6600 GT Extr.

and

6600 GT Extr.

and

6600 GT Extr.


:toast:

Quote:

---

Originally Posted by HARDCORECLOCKER

:confused: Ähm, You have to set the Vcore manually to get a higher Vdimm ?

Isn't that a little strange............???

:toast:

---

Seems to be a bios feature, kind of a protection against the ones who don't know what they're doing so that somebody who's not an overclocker, accidentally doesn't set it to 3.7Vdimm, for example ;)

hi there, i got mine board on friday from HPM-Germany, bios version was from 19.01. tried over weekend my mushkin bh-5 / tccd's. something is holding me back. what's your max HTT with divider ? dont hope it's cause of the first revision.

psycho303

I'm starting to wonder if the NF4 chipset is just a poor overclocker. What I mean is, except for the best of the best overclockers, the rest of us are having a hard time with them. Seems all the current boards are flakey, they all have something.

i feel sorry for you guys. these new boards looked really good, finally you can ditch your crappy neo 2s, and now your having more bad luck.
the nforce4 is a crappy design but if anyone can work it it will be dfi.
if it wasnt for SLI, and fx 55 was on 754, then the LPUT nf3 would be everyones dream board

Quote:

---

Originally Posted by psycho303

hi there, i got mine board on friday from HPM-Germany, bios version was from 19.01. tried over weekend my mushkin bh-5 / tccd's. something is holding me back. what's your max HTT with divider ? dont hope it's cause of the first revision.

psycho303

---

Go back a few pages in this thread, you will see pictures of what the new revision is, look for the sticker on your board.

Lastly follow Tony's advice, and update your bios if it is not the version number Tony refers to.

Hello im new here but I was watching the dfi posts some weeks ago. I have a 3500+ winch and OCZ plat pc3200 rev2 memory and im looking for a mobo,msi neo4 or dfi ultra. This memory dont likes voltage too much, 2,8V max i think. It is worth to take the dfi mobo or msi neo4 is best for me? my heatskink is xp-90 + enermax.
Thx!