athlon64 overclock record. all owners please post

Quote:

---

Originally posted by misteroadster
FX51 0348 Gigabyte K8NNXP 940 OCZ 3200@2,8V(no mods)
Waterchilled
http://pageperso.aol.fr/misteroadster/2981.JPG
With 9700 hercules 495/337 :
http://pageperso.aol.fr/misteroadster/24239.JPG
superpi 1M
http://pageperso.aol.fr/misteroadster/30Sec.JPG
superpi 32M
http://pageperso.aol.fr/misteroadster/32M26m20.JPG
CpuMark
http://pageperso.aol.fr/misteroadster/369.JPG

---

great my friend :D

Quote:

---

Originally posted by Zeus
That is one very nice chip man! :thumbsup:
How much did it do @ 1.7V with the stock cooler?

Mine does 2574 PiFast stable with 1.7V, i wonder if it will do as good as yours under a prom? :slobber:

---

Sorry Zeus, didn't bother to check it with stock cooling... I bought the mobo second-hand from a friend, had the promie kit already installed so I actually plug'n'played with it, :)

For me:

Super PI1M: 31s @ 2733Mhz
Super PI32M: 28m 15s @ 2723Mhz
A64 3200+
prometeia Mach 2

Ok, last one... have to start my own thread sometime, :)

Vcore: 1.8V
Vdim : 2.95V
LDT: 2.5x
Ocz 4000, 1x512, 2.5-4-4-7.

Hey guys need a favor run this rendering bench with your AMD 64 systems...does not matter what video card just CPU intensive..trying to compare to P4EE times of appx 4.45 is fastest To my knowledge..trying to set up a data base independent of GPU's.. LINK ..Thanks

Quote:

---

Originally posted by RootX
Ok, last one... have to start my own thread sometime, :)

Vcore: 1.8V
Vdim : 2.95V
LDT: 2.5x
Ocz 4000, 1x512, 2.5-4-4-7.

---

:bows:

nice overclock

Quote:

---

Originally posted by Bulldog
Hey guys need a favor run this rendering bench with your AMD 64 systems...does not matter what video card just CPU intensive..trying to compare to P4EE times of appx 4.45 is fastest To my knowledge..trying to set up a data base independent of GPU's.. LINK ..Thanks

---

Just unzip it and run the "RenderBench.exe" ?? cause I did that and scored 0min 22 secs...

How do i get an fsb of above 230mhz with a Asus K8V Dlx and a 3400+ without doing vmods?.

Will i need a Pci ATA controller, or how do i do it??.

Or should i go after the Shuttle board?, after what i have read around, a lot of Nforce 3 board dies??. I have a 8KNNXP which suddenly became unstable, it will randomly boot, so now i need a new mainboard.

Kind regards.
Tiger


My rig. (well.., will be complete in a few days):

Vapochill XE with socket 754kit
1 gig of Mushkin Pc4000 Lvl1 memory
R9600Pro
Seagate 160gb Ata HD

Quote:

---

Originally posted by Tiger[DK]
How do i get an fsb of above 230mhz with a Asus K8V Dlx and a 3400+ without doing vmods?.

Will i need a Pci ATA controller, or how do i do it??.

---

http://www.newegg.com/app/ViewProduc...102-016&depa=0

that is what i have

i have done 285mhz FSB
need more volts

got 2x10k raptors in raid s-ata
1x300GB ide133 on that controller

i bought it specifically for the a64
but its also good
if u usin' onboard raid like i once did mobo goes bye-bye you f*cked wit card u saved

I got my A64 3200 for a while ago and its running pretty well..

Prime at 2.37Ghz And 3D at 3.39Ghz on 1.7v..
Im hoping for a sucessfull vcore mod in some days..
Im running cold water so I hope for 2.5 with a vmod:)
http://home.no.net/geek:banana::bana...d/prime1.7.JPG

Thanks for reply RootX..it runs different resoultion's.
.
main one I need is last one 800x600
.
Heres a xp2500 at 2.53

Time 150x100: 17 sec
Time 200x150: 31 sec
Time 300x200: 51 sec
Time 800x600 : 5min 5 sec
.
post a screenie of "house" when done if possiable.

Here you are Bulldog,

I think that is what is known as a shut out by AMD :D

Regards

Andy

i feel small im only on 210x10 lol, since my comp was so damn troublesome when i 1st got all the parts i dont want to bork anything so am waiting for the boards with PCI/AGP lock :)

also anyone in here ever had any problems with corsair 3200 v2.1 ram in there Asus K8Vs? cause mine wont go to 200fsb it just doesnt change from 5:4, it wont go in sync (i can set it to 2:1 but it wont actually change - and it can go lower - im only using the 1 stick when thats in as well)

weird score

NEW BEETLE

http://homepage2.nifty.com/NewBeetle/img123.gif

Thanks for all the info guys ..RootX..I think your #1 as of today..:toast:

Any one in here with a Shuttle AN50R and a Radeon 9800pro?

I have heard that there's alot of trouble by mixing these two piece og HW, is it true?

absolutly untrue

That sound very nice. Because i'm gonna buy a Radeon 9800 pro :P

I tested it with 9800 PRO , 9800 SE and some 9800 XT's
everything works perfectly

Sounds good ;) Thx for your help m8 :)

Quote:

---

Originally posted by A64'uSER
Any one in here with a Shuttle AN50R and a Radeon 9800pro?

I have heard that there's alot of trouble by mixing these two piece og HW, is it true?

---

i'm using both of those and have had no problems.

I'm glad to here that ;)

Do any of you know the best Air cooler for socket 754?

thermaltake venus 12 probably. i had a 3000+ benching at 2.5ghs and 1.9vcore on a hot day and it stayed below 46'
they do need lapping though.

Can any of you find a compare with all the socket 754 coolers?