Venice, Stepping and Oc Database

Printable View

Show 100 post(s) from this thread on one page

06-09-2005, 11:26 PM
Dani

Quote:

Originally Posted by babyelf

Lbble 0517 Dpmw

Try again with 2810MHz 1.36Vcore and CPU-Z on screenshot
Thank you
:)
06-09-2005, 11:33 PM
babyelf

1 Attachment(s)

here
06-09-2005, 11:54 PM
TEDY

babyelf you have same stepping as me
06-09-2005, 11:54 PM
babyelf

:D tedy

how is urs doing?
06-10-2005, 12:08 AM
babyelf

http://img.photobucket.com/albums/v3...f/d977e5e5.jpg

more :)
06-10-2005, 12:10 AM
TEDY

it's really bad :(

needs 1.485v (1.425v cpu-z) for 311*9

altho mine cooling sux but on the other hand temperature are way below 50°c so i got no clue what's wrong
06-10-2005, 12:11 AM
babyelf

Quote:

Originally Posted by TEDY

it's really bad :(

needs 1.485v (1.425v cpu-z) for 311*9

altho mine cooling sux but on the other hand temperature are way below 50°c so i got no clue what's wrong

bios?
06-10-2005, 12:16 AM
TEDY

5/10-3 let me write everything in sig.
06-10-2005, 12:21 AM
babyelf

hmm same.. 510-3 as well.. orange slots for my bh-5
06-10-2005, 01:52 AM
babyelf

1 Attachment(s)

3ghz WOOT
06-10-2005, 02:06 AM
perry_78

0517 GPPW

Stock air:

240*10 with stock voltage prime95 stable

270*10 @ 1,72V 32M stable
06-10-2005, 02:19 AM
TEDY

babyelf: what cooling do you have ?
06-10-2005, 02:37 AM
babyelf

using my corsair cool now :)
06-10-2005, 03:05 AM
ArcTan

Quote:

Originally Posted by babyelf

using my corsair cool now :)

snapped it up for a bargain too

edit: lol in 3 months you've posted 50 posts more than I have done in almost 3 years
06-10-2005, 04:37 AM
187(V)URD@

arf i hit 3ghz but then my system crashed :p
In a month if i got some more time then i am going to tweak my venice a bit.
Must have 2.9ghz stable at 1.55-1.6V :D
06-10-2005, 07:53 AM
babyelf

1 Attachment(s)

3ghz? :)
06-10-2005, 02:34 PM
187(V)URD@

yeah nice but your stepping is better then mine :)
06-10-2005, 11:49 PM
kosmonova

Quote:

Originally Posted by TheMeatFrog

Sorry to say but I've had two 0518s and two 0516s and neither of the 18s could hang with the 16s, not even close. Both 16s could prime at/or over 2.7GHz but couldn't get the 18s to prime over 2.5GHz with teh same voltage.

ok. but which code ? which is the important code or week ? I think "paw" is good code :confused:
06-11-2005, 12:22 AM
blackjok3r

week is more important. Week 17 and some week 16's are good. *PAW and *PMW are both very good.
06-11-2005, 01:02 PM
Vroom

3 Attachment(s)

AIRCOOL : XP90C with 90@5V
IHS REMOVED idle 23°C 21°Room (mobo on a table)
http://www.yamafoto.com/users/vroom/...n9cyc9xxkh.gif
06-11-2005, 01:06 PM
perry_78

I'm beginning to think it is my board which is holding me back. My 0446 winchester and both 0517 and 0518 Venice chips perform the same

~2400mhz on stock voltage

I have been plagued...
06-11-2005, 01:12 PM
Mr.President

http://img213.echo.cx/img213/3557/2950110cu.jpg
06-11-2005, 01:24 PM
fullup3

Just got a week 19 3200+in from monarch and it sucks ass. Will only do 2.4 no matter what voltage I put through it. If I clock it any higher, it just crashes when I try to bench it with superpi or prime.
Guess my 2.6 week 16 wasn't so bad after all.
06-11-2005, 01:30 PM
perry_78

Quote:

Originally Posted by fullup3

Just got a week 19 3200+in from monarch and it sucks ass. Will only do 2.4 no matter what voltage I put through it. If I clock it any higher, it just crashes when I try to bench it with superpi or prime.
Guess my 2.6 week 16 wasn't so bad after all.

Don't feel that bad.

I went through a 0517 and 0518 which clock exactly the same, 2700mhz with 1,7Vcore

I believe its my board though, as 3 of my cpus have clocked almost the same...
06-11-2005, 04:50 PM
babyelf

juliette.. what did u set in bios? there's a lot of things that can affect the overclock

check here www.i4memory.com :)

eva's there and he's got a wonderful guide with how to tweak for venice

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:10 PM.

XtremeSystems