The San Diego OC DISCUSSION Thread

Quote:

---

Originally Posted by stealth17

LDT has only made me unstable in the past, temps not being the problem. just depends on the board and chip i guess. test to find out! :toast:

---

Alright man thanks...I will give it a shot..
What is a good voltage to try on it...and what is safe...that is why I haven't messed with it at all.

Also what is a good setting for the HT Muliplier? AUTO or 5x?

Skt 939 is way different than Skt 754...

And PCI-E is very much different over AGP...does the PCI-E Bus speed do anything set other than to 100MHz?

Have any of you guys received a good 3700+ from newegg Nj warehouse?

Ok trying this...my Windows XP Install just got corrupted some how...

I am trying this...

250x11.0 @ 1.500 + 113%
LDT @ v1.4
Chipset @ v1.6
DRAM @ v2.90

1:1 Divider

Timings:
2.5-3-3-6-1T

HT Multi /Auto or 3x (3x is save up over 300+)

What exactly is the HT good for...and how does it affect overclocks and peformance?

Need a bios recomendation for 3700+ DFI Ultra-D, with OCZ VX and Vapo LS.

Should I Take 6.23-2 since I have Vx memmory. Or one of the 510?

Thanks!

Quote:

---

Originally Posted by ugp

What exactly is the HT good for...and how does it affect overclocks and peformance?

---

it causes instability i cant say which error/BSOD u will get....

Quote:

---

Originally Posted by Razor_cut

Need a bios recomendation for 3700+ DFI Ultra-D, with OCZ VX and Vapo LS.

Should I Take 6.23-2 since I have Vx memmory. Or one of the 510?

Thanks!?

---

i use for my bh-5 the 6.23 -2 and it works fine also tried tccd but it seems that my sd has a bad mem.controller cant get DDR580-DDR600 stable above 3ghz..... so i use the bh-5 again

seEn

Thanks for the reply Il post an report on the oc later today :)

I gave up for now and am just sitting at stock clocks...

When I get more time off from work I will sit and play with it alittle..

What are the tightest timings OCZ Plat Rev 2 can handle at DDR400...I know it is 2-2-2-5 but the other settings...does anyone have a quick reference chart...?

Quote:

---

Originally Posted by Razor_cut

Need a bios recomendation for 3700+ DFI Ultra-D, with OCZ VX and Vapo LS.

Should I Take 6.23-2 since I have Vx memmory. Or one of the 510?

Thanks!

---

yep as he says 623-2 is good as any.running just nice here with my setup, same as yours but im just watercooling.was thinking going vapo again but CBA atm.

3GHz+ for that Sandy im sure mate.

cooling?

corsair cool :)

just got a new 0522XPBW

first 22 i've seen so far...

results are looking very dismal at the moment...

won't do 2.5 ghz @ stock voltage 1M superpi without a voltage increase...

hmmm... kinda sad... was hoping for 2.8 with 1.5 to 1.6 volts...

Quote:

---

Originally Posted by babyelf

just got my san diego

CABGE 0516 TPAW
http://www.comeapart.com/babyelf/san...superpi8mb.JPG

http://www.comeapart.com/babyelf/san...pi1mbtight.JPG

---

how stable is that max o/c? 1m superpi doesnt mean jack. ;)

:stick:

funny the discussion thread turned into the post your max clock pic thread.......... guess people can't read..

i refuse to be as low as you mr. Abit WR holder

ppl are here for information and fun.. u can give ur english tuition classes somewhere else

Quote:

---

Originally Posted by sideeffect

:stick:

---

for those that didnt see the editted post:

Hello pumbertot,

sideeffect has just replied to a thread you have subscribed to entitled - The San Diego OC DISCUSSION Thread - in the AMD forum of XtremeSystems Forums.

This thread is located at:
http://www.xtremesystems.org/forums/...0&goto=newpost

Here is the message that has just been posted:
***************
Good job he showed a 32mb pi run and not 1mb then :)
***************



:p sorry mate had to do that. ;)
so babyelf again I ask can you show us the max 32M superpi overclock, interested.

still @ it.. will post when i have it :)

Quote:

---

Originally Posted by babyelf

i refuse to be as low as you mr. Abit WR holder

ppl are here for information and fun.. u can give ur english tuition classes somewhere else

---

might find more info in the actual OFFICIAL OC'ing thread.http://www.xtremesystems.org/forums/...ad.php?t=59406 as this is the DISCUSSION thread.......

for those to lazy to read page 1


"The purpose of the "official" thread is for forum members to display their overclocking accomplishments. I weeded out 4 pages of this from the other thread: "Oooh. I hope my chip does that!"..."But is it Prime stable?"..."What's the default multiplier on that again?"...Where did you buy it?"..."Is it worth it?"

The point of this thread is for all other discussions with regard to the overclocks in the "official" thread. A lot of forum members like to get straight to the point with the screenshots without having to sift through a mile of smileys and other posts."

gotta love how people like to :banana: :banana: :banana: :banana: on other peoples acchievements to. Then they wonder why no one helps them.....

no one is :banana::banana::banana::banana:ting on other's achievements here.. ur record is great.. and i totally respect that.. but if u're gonna come in and insult people about whether they can or can not read... now that is another thing... like i say we are here for the fun of it..

and before editing i said i did not post it on the oc thread yet because i haven't got my max overclock.. if that isn't allowed here then please.. point me to another thread that will let me post my stepping and progress on overclocking my SD

nothing against ur record again.. they are truly remarkable.. just please please don't come in and say people can't read or something like that.. it's not nice and sometimes offensive.. if u would have said "i think this belongs to another place or something" people would have just gone oops or something.. hope i get this msg thru in a nice way

Quote:

---

Originally Posted by babyelf

no one is :banana::banana::banana::banana:ting on other's achievements here.. ur record is great.. and i totally respect that.. but if u're gonna come in and insult people about whether they can or can not read... now that is another thing... like i say we are here for the fun of it..

and before editing i said i did not post it on the oc thread yet because i haven't got my max overclock.. if that isn't allowed here then please.. point me to another thread that will let me post my stepping and progress on overclocking my SD

nothing against ur record again.. they are truly remarkable.. just please please don't come in and say people can't read or something like that.. it's not nice and sometimes offensive.. if u would have said "i think this belongs to another place or something" people would have just gone oops or something.. hope i get this msg thru in a nice way

---

No offense intended. I didn't say anyone could't read just said some people to lazy to read through all the pages. In fact i do it myself.its like a comic book most people look at the pics first read the bubbles later :P

Quote:

---

Originally Posted by chew*

No offense intended. I didn't say anyone could't read just said some people to lazy to read through all the pages. In fact i do it myself.its like a comic book most people look at the pics first read the bubbles later :P

---

all cool.. just thought will let u know.. be nice :p bad chew :nono: :p j/k

What is a cool Air Cooling HSF Combo for the San Diegos...I mean it already runs cool on stock but cooler is always better...

i reckon an XP90C and a panaflo 92mm medium speed fan will do very well