this board gave new life to my corsair 2133 set:)
http://imagizer.imageshack.us/v2/xq90/40/8qlm.png
Printable View
this board gave new life to my corsair 2133 set:)
http://imagizer.imageshack.us/v2/xq90/40/8qlm.png
One of the best all round boards on the market man... Brian would have found this one uber boring as almost any RAM kit directly works out of the box... Kuddos to Nick Shih, the bios team and a bit of Splave...
Gigabyte also improved big time, ASUS went backwards ( Impact was fab, Gene was far less... )
yea this board got me breaking out old and new ram only thing is i cant bring up the bclk on this board it just results in a post rest im testing some psc and its giving me 7 errors which im trying to iron out at 2600mhz 8-12-8-28 so i figure i drop the divider and see how stable going from 2500 but even at 104 bclk it just resetsQuote:
Originally Posted by Leeghoofd
http://imagizer.imageshack.us/v2/xq90/607/0un1.png
http://imagizer.imageshack.us/v2/xq90/691/h3nz.jpg
http://imagizer.imageshack.us/v2/xq90/36/b9x7.jpg
http://imagizer.imageshack.us/v2/xq90/199/g0l2.jpg
did the beasts arrive?
Managed this today, had these Dominator GT's 2000 cl8 for a few years now, thought I would see what they are capable of doing on this fantastic board, not bad me thinks. Never really been into Ram overclocking, so a novice so to speak. Not to sure how much further they can be pushed. ??
Also have a set of Dominator GT 1600 cl6 Elpida Hypers, does anyone have any idea what they would be capable of, any help would be appreciated by this Memory noob. lol
http://i572.photobucket.com/albums/s...apture2222.jpg
http://i572.photobucket.com/albums/s...Capture111.jpg
just got to testing them now i have a suck ass cpu thoQuote:
Originally Posted by Splave
quick run to check clocks
http://imagizer.imageshack.us/v2/xq90/208/zx7r.png
Hypers are a waste of time on these platforms... while timings might look wow, the efficiency will be far fetched...Quote:
Originally Posted by moorhen2
yea im starting to see that i may have to get a second board to bench with since this is in my main rig lolQuote:
Originally Posted by Leeghoofd
A lot of fun clocking this board. Your platinum 2133 C9 Samsung will be good to go with it :)
@mismax I wouldn't even bother running 4 dims on this board that would be holding you back,just run 2 dims and then start tightening it all up,you can check lots of subs around and that will show you all the sub timings everyone's is running,this will save you so much time as its a new platform to you.
so not true about efficiency. hypers run great efficiency!Quote:
Originally Posted by Leeghoofd
http://i48.photobucket.com/albums/f2...pse98c7d93.png
Yeah I remember this,nice hyper result zenQuote:
Originally Posted by ZenEffect
Thanks! I thought it was pretty decent efficiency considering memory was only @ 2400 but its like chasing unicorns apparently.Quote:
Originally Posted by bullant
It is crazy efficiency,the best efficiency considering its only 2400Mhz and airQuote:
Originally Posted by ZenEffect
yeah im just trying different setups with all kinds of memory, I really like the board just getting a feel for it..Quote:
Originally Posted by bullant
No worries man,its a really nice board and looks like you got few sets of memory's to test thereQuote:
Originally Posted by msimax
sending some volts thru my old gtr lol
http://imagizer.imageshack.us/v2/160...0/401/is3o.png
Never tried hypers on the ASRock to be honest. On the ASUS boards as I couldn't tighten the TRDRD and the TWRWR value below 5 (always post code 55)... so I stand corrected :) Great run and info ZenQuote:
Originally Posted by ZenEffect
It confirms that ASRock did a excellent bios on these boards, hopefully the same will happen on Z97 :)
Just a quick one from me. Having trouble passing SuperPI @2600, but 2400 not so bad.
http://i572.photobucket.com/albums/s...4444444444.jpg
Just thrown in a pair of Crucial Ballistix Sport 1600 cl9, Micron D9's I believe, stock voltage 1.5v, gave them 1.65v for this.
http://i572.photobucket.com/albums/s...ure55555-1.jpg
looking good MSImax :D :D
I like seeing D9GTR on Z87! :up:Quote:
Originally Posted by msimax
thanks fellas :up:
splave the beasts came i took em out ran them then wrapped them up like mummies lol they only coming out during official business
1 more gtr run keeping @ 7-6-6 took more volts than i was comfortable doing on air
http://imagizer.imageshack.us/v2/160...0/560/bfjk.png
old sammies HCFO
http://imagizer.imageshack.us/v2/160...0/541/vm8d.png
Can you do 1066 MHz 8-7-6 / 8-7-7 with the D9GTR kit?Quote:
Originally Posted by msimax
Which HCF0 kit is it? 1200 MHz 10-10-10 @ 1.75V is pretty nice.