Here are Hynix BFR, this run 1251MHz 9-12-10-25-1T 1.74 V, but only with BIOS P1.60,0
at PSC and BBSE P1.15G I must have so that I can boot 1300MHz, it just a BIOS type, where all chips run equally well.
http://www.kingpic.net/th/hynix_bfr_1251mhz.jpg
http://i.imgur.com/4DmIq.png
testing a new chip, (23 at 2723:shakes:) so figure I would test a new kit as well, but with tight subs.
Hi Nick,
what is the use of XCLK RCOMP voltage?
Yes Nick,...what is XCLK RCOMP Voltage ?
Internal clock generator compensation voltage = XCLK RCOMP
And what is the exact ?Quote:
Originally Posted by RoboionatoR
For what is it exactly ?
Quote:
Originally Posted by nfszocker
can u run the same on P1.60 with PSC and bbse ?
Quote:
Originally Posted by mahaudi
this one actually helps for PCIE overclocking .
Please Nick ,.....make a new Formula Drive :(
Formula Drive is very buggy .
No, only hynix.Quote:
Originally Posted by nickshih
BBSE and PSC, run best of all with P1.15G
I have not tested P1.8, but P1.6 works best for me with BBSE/PSC.Quote:
Originally Posted by nfszocker
Hi @all,
I tried to clock my platinums to the limit, but it didn't matter, how much voltage after 1.72V I gave...nothing helped...always the same maxmem!
So I decided to measure my VMEM...and what's up??? I just got 1.71V max - no matter how much is adjusted in BIOS!
Could someone try this?
For me not.Quote:
Originally Posted by l0ud_sil3nc3
PSC and BBSE not everything is same.
G.Skill PI's @ 1,675V Dimm
http://www.kingpic.net/th/snap0005u62uoors.jpg
Hi Nick,
have the same problem with my formula.
Everything more than 1,705 V DRam Voltage, is not feasible with the Board, unless, I do the Board hot.
thanks nfocker
Quote:
Originally Posted by emertX
Had this issue with my first board, RMA'ed it and all is well.
If your online-shop, this recognizes as a reason RMA, everything is okay, my online-shop, does not do it.
Mine too!
^No reason they should not RMA, the board is obviously damaged if vdimm can net bet set past a certain voltage.
What bios was this on?
all the same which bios, everything tries out.
topically L1.15G
Hi, at the end of a ln2 session, i've some stability problem with blue screen crash.
After drying, the cpu run only one core and the cpu multiplier is looked, also when i shoot down from windows the board does not turn off the power supply.
I've not another board to test the cpu, may be board's problem?
With other cpu tries?
If 10K Resistor has inserted now and it runs.
Thanks
http://www.kingpic.net/th/g_skill_12...06_21_453s.jpg
http://www.kingpic.net/th/snap0015cvrh2ctc.jpg
I'm having problems running my Samsung Dominator 2666 C10 on this board at 2800+ mhz. On Maximus V Gene I can boot and run SPI 32M at 2800 10-12-12-25 1T and even boot 2933mhz no problem.
What is the best bios for samsung 2800+ mhz on this board?
Try 1.42Quote:
Originally Posted by kagula323
http://imageshack.us/a/img84/592/screenshot070v.png
Uploaded with ImageShack.us
My new Costa
2,800MHz CL9:wave:
http://www.kingpic.net/th/02-04-2013...16o6j2wgiu.png
what ram and voltage for vddr, vcsa, vccio?
VCCSA 0,933V and VCCIO 1,141V