Gigabyte GA-P67A-UD5 Discussion Thread

Printable View

Show 100 post(s) from this thread on one page

02-12-2011, 06:00 AM
flesheatinvirus

Hey guys I just tested my ram running with No Execute Mem Protect disabled from within advanced bios section which on the UD7 gained some speed, it works with the ud5 as well. I shaved about 5 secs off my 32meg Pi time. Thanks Dinos22, Chew and C-N for that.
02-12-2011, 06:09 AM
C-N

Quote:

Originally Posted by flesheatinvirus

Hey guys I just tested my ram running with No Execute Mem Protect disabled from within advanced bios section which on the UD7 gained some speed, it works with the ud5 as well. I shaved about 5 secs off my 32meg Pi time. Thanks Dinos22, Chew and C-N for that.

What OS?

Didnt notice anything in 7 but XP is way quicker
02-12-2011, 06:14 AM
flesheatinvirus

Yes it was with XP, I went back after playing around with 7 Ult for a while.
02-12-2011, 07:02 AM
C-N

Quote:

Originally Posted by flesheatinvirus

Yes it was with XP, I went back after playing around with 7 Ult for a while.

Cant remember what XP used to make but its better maybe 7 seconds or so.

http://i106.photobucket.com/albums/m...71071TXP-1.png
02-12-2011, 09:47 AM
OC Maximus

Here is my spi23m with cpu maxed out.

Ram issue I'm having is that I can't lower tRCD to 9 like I want.

http://hwbot.org/signature.img?iid=5...se&iehack=.jpg

BTW, thanks for the pm flesheatinvirus. I'll keep trying at it.
02-12-2011, 09:57 AM
flesheatinvirus

Very nice Pi score even at 10 trcd, you got me beat. You guys are pushing some real nice 32meg Pi scores there right on the edge of sub 6.:up:
02-12-2011, 09:57 AM
C-N

Quote:

Originally Posted by OC Maximus

Ram issue I'm having is that I can't lower tRCD to 9 like I want.

You not the only one, my ram will go maybe 2000MHz 6.9.6 / 7.9.7 much past that performance drops off then further past that bsod
02-12-2011, 03:35 PM
kadombing

Quote:

Originally Posted by TurboDiv

Hey guy, sorry to hear you got that nasty bug like me. For the record, I also have a Creative X-Fi Xtrememusic on one of the PCI slots. I was extremely annoyed with all of this cold boot issue and (knock on wood) i think i might have cracked it for the last 2 days. I don't want to bring anyone's hopes up but it appears to be extremely related to the CPU clock + PCI card + the power line of the house going to your system + the quality of the Active PFC on your power supply unit. ( Did i just mention like 90% of the components, lol)

So what i did first was bought a voltage regulator that connects my rig + monitor only and as soon i fired it up it registered that my line was overvolting and the unit was correcting it. Next i lowered my CPU down to 4.6 ghz and left the voltage a little bit higher - same as for my 4.9 ghz stable clocks. Ram was set to 2133mhz Cl7 as with its specs. At these settings my machine was having problems cold booting before w/o the voltage regulator but now it seems to be running fine for the last 2 days w/o any cold booting issues. At the same time i noticed a bit higher values for the 3,3v line from ET6 with the voltage regulator which suggests that the Active PFC of my power supply was not coping properly regulating the voltage from the house line. Also i noticed that BCLK exactly at 100mhz was making things more stable than to let the mobo default it at 99.8mhz.

First i would suggest to try and lower your CPU speed down to like 4.4 ghz with memories at the right specs and slowly build it up multi by multi until it starts cold booting or if it is cold booting w/o any CPU overclocks try and get a voltage regulator - it is always better to have one anyways (~30$). Right now if i increase the CPU multiplier to 47 it has issues cold booting from the first time but it is stable once it boots to windows, up to 49 multi with 2133mhz ram. This is all still testing things but so far i had like 5 successful cold boots w/o any problems with 2133mhz ram (XMP - profile1).

I had cold boot the first time I turned it on (with PCI cards). And now, even without overclock sometimes it still boot twice when restarting or turning on. Most of the times it did not have any issues, but there is that 1 out of 5 of twice or three times booting-re-booting. And I intentionally still haven''t passed 3.9 Ghz overclocking.

I was saving my money to get one of this CyberPower 1500EAVRLCD
Still long way to go :p:

Quote:

Originally Posted by Falkentyne

DEFINITELY reset the cmos. I found that the board was giving me 8x PCIE at 100 mhz (auto) and 99.8 and below, but was giving me 16x at 100.1 or 100.2. When I reset the cmos, auto gave me 16x PCIE again.

Once while doing memtest my RAM was read wrong even if in the post and then OS read it right :confused: But anyway, I noticed a new problem: CPU-Z grayed out my RAMS??? For Instance I can't see my RAM in any of the 4 slots.. All grayed out. :confused:

If after reboot there is still this problem gonna reset CMOS tomorrow.
02-12-2011, 03:58 PM
C-N

Quote:

Originally Posted by kadombing

I noticed a new problem: CPU-Z grayed out my RAMS??? For Instance I can't see my RAM in any of the 4 slots.. All grayed out. :confused:

If after reboot there is still this problem gonna reset CMOS tomorrow.

I had this once with XP & an old version of CPU-Z, the old version of CPU-Z worked fine on W7 :shrug:
02-12-2011, 04:07 PM
damsxx

come back of CPU PLL overvoltage on UD3 - 4 and 7 with F8 bios !!

what are they doing with UD5 always with F6 bios ...... µ??????????
02-12-2011, 04:23 PM
C-N

Quote:

Originally Posted by damsxx

what are they doing with UD5 always with F6 bios ...... µ??????????

Oh didn't you know..... they making us a special 6GHz DDR2400 6.9.6 killer accurate voltage stable bios :D
02-12-2011, 04:28 PM
damsxx

Quote:

Originally Posted by C-N

Oh didn't you know..... they making us a special 6GHz DDR2400 6.9.6 killer accurate voltage stable bios :D

F6 WHQL is not a bad bios for H24/7 ( i have not 2133 bug ) so i can do 4.8ghz 1.32v solid but not 49 or 50x
02-12-2011, 04:35 PM
C-N

Quote:

Originally Posted by damsxx

F6 WHQL is not a bad bios for H24/7 ( i have not 2133 bug ) so i can do 4.8ghz 1.32v solid but not 49 or 50x

Thats just coz F6 has no internal PLL overide no? My 2500K only makes 49 without int PLL.
02-12-2011, 05:34 PM
C-N

Bit more pain for the Z'ds...

Windows 7 64-Bit
http://i106.photobucket.com/albums/m...61061TW7-1.png

Windows XP 32-Bit
http://i106.photobucket.com/albums/m...Hz61061TXP.png
02-13-2011, 09:14 PM
kadombing

Yo! The problem is solved here, BCLK set on 100, RAM set to native 1600 CL8, 1.54 V, everything else set on Stock(including VCore, Turbo, C1E, C3/C6, TM, EIST, ect.), CPU-Z recognizing everything.
Multiplier 45 X, 31°C idle, 60°C running Intel Burn Test.

Serve my purpose, so won't push it higher.. For now :D

But sometimes still having cold boot issue that says unstable OC so I have to load the profile every time it do that nasty thing!

:mad:
02-15-2011, 12:57 AM
C-N

:bounces: look what Stasio just poseted on the UD7 thread

Intel Extreme Tuning Utility.

http://download.gigabyte.eu/FileList...tility_xtu.exe

Info

http://www.intel.com/design/motherbd.../xtu/index.htm

http://downloadmirror.intel.com/1968..._BG_readme.txt

Dont think its going to work in XP!!!

.
02-15-2011, 01:17 AM
Lsdmeasap

Ya, testing in XP now. It requires .NET 3.5 SP1 so that's still downloading
02-15-2011, 01:25 AM
C-N

Quote:

Originally Posted by Lsdmeasap

Ya, testing in XP now. It requires .NET 3.5 SP1 so that's still downloading

Let us know how you get on, would be quite cool if it all works in XP. I'll give it a go on Server 2003 later tonight & report back.
02-15-2011, 01:32 AM
Lsdmeasap

Will do!

I'm sure you also need to install the Intel HECI drivers too, without those Easytune doesn't work in XP either (I think it does with them)

I'll let you know in about 10 minutes if it works in XP or not, unless there is another update I need after the one mentioned above installs.
02-15-2011, 02:05 AM
Lsdmeasap

No luck on XP, it doesn't install. This is a fresh install without any updates, so maybe something is still missing?

I installed HECI, the required .NET 3.5 SP1, and the latest Chipset driver, so not sure what else is missing but it doesn't ask for anything else during the install?

http://i.imgur.com/DQ7Z4.png

Quote:

Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action RegisterChipsetAccess.38BEA05C_BD35_41D3_A167_42B8 8B949E03, location: C:\Program Files\Common Files\Intel\Intel Extreme Tuning Utility\, command: regsvr32.exe /s "C:\Program Files\Common Files\Intel\Intel Extreme Tuning Utility\ChipsetAccess.dll"

Looks like missing .dll maybe?

Ahh, found the problem in the readme linked above

Quote:

Note: The Windows Vista Starter Edition and the Windows 7 Starter
Edition are not supported. Earlier operating system versions of
Windows 95, 98, 98 SE, NT, 2000, ME, XP, and Server 2003 are not
supported.
02-15-2011, 02:20 AM
C-N

Quote:

Originally Posted by Lsdmeasap

No luck on XP, it doesn't install.
Ahh, found the problem in the readme linked above

Ye thats why I posted it :-( would have been nice, I'm sure some clever cookie will come allong & work it out :D
02-15-2011, 02:27 AM
damsxx

Quote:

Originally Posted by C-N

:bounces: look what Stasio just poseted on the UD7 thread

we need new bios for UD5 please :D :D
02-15-2011, 02:35 AM
Lsdmeasap

Quote:

Originally Posted by C-N

Ye thats why I posted it :-( would have been nice, I'm sure some clever cookie will come allong & work it out :D

Someone probably will, looks like we may just need to add that .dll and register it.

It does an OS check during the install, and it goes right past that, which it shouldn't if it's not for XP. So I dunno?

Not worth much anyway, I was just testing in 7 and you have to reboot to apply anything. I only tested Bclk change and CAS though, expected CAS to be a no go but Bclk change needing a reboot means this doesn't have anything on easytune. Voltages are probably ok without a reboot though, but it wouldn't surprise me if that also said please reboot :D
02-15-2011, 02:56 AM
C-N

Quote:

Originally Posted by Lsdmeasap

Someone probably will, looks like we may just need to add that .dll and register it.

It does an OS check during the install, and it goes right past that, which it shouldn't if it's not for XP. So I dunno?

Not worth much anyway, I was just testing in 7 and you have to reboot to apply anything. I only tested Bclk change and CAS though, expected CAS to be a no go but Bclk change needing a reboot means this doesn't have anything on easytune. Voltages are probably ok without a reboot though, but it wouldn't surprise me if that also said please reboot :D

Shouldent be a problem to add & register it..... he says!!!

Oh..... nice monitor then!!!

Looked like it gave an indication of the Internal PLL voltage... the actual voltage? & the sub timing thingy looked interesting too.
02-15-2011, 03:02 AM
Lsdmeasap

That's what I was thinking, just didn't have time to do it right now is all.

Ya, I noticed that about internal PLL in the video, then forgot to look when I was playing :( (I'll look at that real quick now)

I'll play with it more later on, but by then I'm sure you guys will all be far ahead of me and already have it up and running on XP :D

Show 100 post(s) from this thread on one page