http://www.gpureview.com/show_cards....614&card2=613#Quote:
Originally Posted by Unoid
940 core, 2400 memory.
Printable View
http://www.gpureview.com/show_cards....614&card2=613#Quote:
Originally Posted by Unoid
940 core, 2400 memory.
dont tell the whole story, depends on game and resolution also.Quote:
Originally Posted by Unoid
Basically, a 5850 is 100mhz on core less than a 5870 to perform the same the 5850 needs 100more on the core.
In practice, games, the difference might not be that big due to game engine and resolutions.
i'd say 900/1200, according to reviews on 870/1200 the 5850 almost the same as 5870 stock..
My XFX with MSi bios runs 940/1200 with small voltage bump to 1.13V Hits 72C at 29% fanspeed on auto.
Now if only I could Overclock without getting the 2d Idle causing flickering...
Seems that with latest MSi afterburner theres a hidden option to enable OCing past STOCK BIOS's
Link: http://hwbot.org/article/news/msi_af...ass_ccc_limits
I may flash back my stock XFX and test this out.
This is almost correct based on numbers alone. 945/1200 would be just slightly faster than a 5870. But as stated above, number alone don't paint the whole picture and the 5850 is very close to the 5870 in real gaming scenariors even at lower overclocks.Quote:
Originally Posted by Pandora's Box
That load voltage is incorrect or you're not fully stress testing the card. Try some Crysis Warhead Frost loops. Voltage for 940/1200 should be around the 1.2v.Quote:
Originally Posted by Unoid
Aren't voltage requirements different for every chip?
Slightly, but not that far off. That a BIG difference on a 5800 series card.Quote:
Originally Posted by jaredpace
Anyone have a 5970 watercooled on a full-cover block? Would like to see your temperatures & voltages!
:)
Here's screen shot clocks are a lil less but its where I like it. I had time for just the 5 minutes or so but I had it going for 1 hour last night and it was fine. Been gaming and no crashes.Quote:
Originally Posted by Blkout
http://unoid.net/pics/5850oc.jpg
where do you get an Afterburner like this !?!?
http://i47.tinypic.com/2iih3j8.jpg
http://kingpincooling.com/forum/show...&postcount=124
I have a question. I flashed my Sapphire 5850 with Asus bios, but Smart doctor 5.51 not work, it gives me an error: "can not find video cards information". Is there any way to fix this? AFAIK when the card is flashed with Asus bios, Smart doctor should work?!
maybe try an older version like 5.48? Does gpu-z read bios sub-vendor ID as ASUS?
just change the skinQuote:
Originally Posted by jaredpace
No, jaredpace wants to know how to push voltage to 1.6v like me!
Yes, GPU-Z read bios sub-vendor ID as ASUS and I try with Smart doctor 5.46, 5.48 without success.Quote:
Originally Posted by jaredpace
Someone who use Smart doctor with non Asus card???
Now I use MSI Afterburner, but I want to try asus utility, because AFAIK it allow to set 1.45v vGPU.
v1.6 ? cool, and the answer is ?? :welcome:Quote:
Originally Posted by pinto
Hard vmod with soldering, but it's strange that no one have posted detailed pictures and description of this hard vmod until now. There is some pictures in ATI 5850/5870 voltmod thread, but they are not very clear. It's a big secret maybe ?!Quote:
Originally Posted by Gaul
i7-860 4.0ghz 5870cf. I normally don't run vantage so not sure what kind of score to expect from this rig.
http://img205.imageshack.us/img205/3203/vantage.png
Almost same as what i got:Quote:
Originally Posted by OC Nub
http://img228.imageshack.us/img228/1962/35044313.th.png
P27050
i7 920@ 4.2GHz
CF HD5870 @ 1000/1350
kpablo & OCnub - Those are some sweet rigs. WOW!~:eek:
Would someone mind PM me the stock Sapphire 5850 bios; my HDD with my backup just died and I'd like to go back to stock now that afterburner works with other vendor's cards as well? :)
You can find it here: http://techpowerup.com/vgabios/57585...24.090916.htmlQuote:
Originally Posted by Toss3