same as mine, 4.5Ghz @ 1.45V, and runs cool around 70C, batch 3850A796 .. need to try 4.6Ghz, but Im waiting for my mobo to be replaced from RMA
Printable View
same as mine, 4.5Ghz @ 1.45V, and runs cool around 70C, batch 3850A796 .. need to try 4.6Ghz, but Im waiting for my mobo to be replaced from RMA
Man I wish mine ran that cool at 1.45v. That is what mine is at 1.35v prime95. I have an excellent overclocker but on the flip side runs a little hotter than the norm.
This classified board is finicky and I am not used to it yet, I came from a Gigabyte. I am slowly get a little better with it...:up:
http://www.myalbumbank.com/albums/us...nature_img.jpg
Daaaammn, that link is slow. It reminds me of trying to load :banana::banana::banana::banana: pictures on the old 28.8K when I was a kid.Quote:
Originally Posted by road-runner
I hope mine gets here Friday sometime so I can test it on my newly acquired MSI Eclipse Plus (with the NF200 chipset). Aso just bought a new case (Cooler Master HAF 932). This case is big and wide. It's gonna be fun! Thinking of taking a few pictures if anyone's interested...
Can prime my 920 D0 with 4510 HT on for 30 minutes but temps are around 85-90C on water with room temp 26C.Quote:
Originally Posted by ben805
This evening I will try a 1.5h prime session as the weather is cold today.
I saw today a 3902axxx batch out at the store. I was so close on grabbing it anyone tried a CPU from 09 yet?
I should if you live in CA..mine will be here tomorrow..but ill have to wait til Mon for my Classified and ram.Quote:
Originally Posted by jcniest5
Yes post some pics please.
I live in MN...Priority stuffs usually get here on the second or third day from anywhere in the States...hopefully latest by Saturday.Quote:
Originally Posted by lee63
I tried 3851Axxx and it was worse than 3850A795 which is a really nice CPU.
For comparison, whatever the 3850 did, the 3851 needed 0.1V more to do.
So maybe the batches are starting to degrade again, or its just that the first batches were 975 binned that were re-labeled to 920 due to lack of production unit and the new batches are lowered binned cpus.
Time will tell I guess.
Anyway, I Just got a D0 3850A795 and Bloodrage GTI, together with Kingston T1 (Elpidia Hyper chips), they make some very nice results.
http://img29.imageshack.us/img29/1420/32m7m52s.jpg
The Bloodrage is a very nice board, too bad it stopped at the famous 222 "wall".
Damn thats very nice OC, what sort of temp you getting ?
Didn't really looked at the temps much, I need to make a serious run with LinX and see.
With my current WC setup I should probably be going at around 75c-80c degrees.
Still very very nice, what you gonna be running at for 24/7 ?Quote:
Originally Posted by The-Fox
My D0 CPU arrived and I just finished hooking everything up except the HD/CD Drives. I dialed it instantly to 200 bclk and it POSTs just fine. The IOH Temp is Super Hot! It got all the way to 85c and still climbing up! Man oh man...I need a fan to cool it down. What's the highest IOH temp before I start to worry about it? I took some pictures and will post them here as soon as I find my adapter so I can upload the pictures to Photobucket.
how do you check the IOH temperature? the MB temp under everest?Quote:
Originally Posted by jcniest5
Quote:
Originally Posted by crashmax
I'm seeing 90/87/89/81 in LinX, and 80~83c in Prime, ambient is also around 26~27C, HOT HOT HOT! :flame:
http://bcphoto.org/misc/4.5ht.jpg
I think 4.51Ghz with HT enable is getting close to the limit of this chip for 24/7 with water. :yepp:
It's in the BIOS under Hardware Monitor. This is on Eclipse Plus so yours may be a little different.Quote:
Originally Posted by ben805
Check the voltage for the IOH.
Should be 1.1v/1.5v(stock).
i7 920 [3851A375] Short Test
Intel Core i7 920 Nehalem [3851A375]
DFI Lanparty UT X58-T3eH8
CORSAIR DOMINATOR 12800 2x6G
GeForce 7300GS
CORSAIR CMPSU-1000HX 1000W
WATER
http://cfile22.uf.tistory.com/image/...4A0A113A1E5444
http://cfile3.uf.tistory.com/image/1...4A0A113C1F13F7
http://cfile3.uf.tistory.com/image/1...4A0A113D207433
http://cfile23.uf.tistory.com/image/...4A0A113F211DD5
Finally getting a little better... EVGA Classified, water cooling with the heatkiller block...
http://img7.imageshack.us/img7/6077/229x19.jpg
http://img7.imageshack.us/img7/7355/4500intelburn.jpg
http://img7.imageshack.us/img7/1199/4657superpi.jpg
http://img7.imageshack.us/img7/3017/wprime5565.jpg
I got mine but don't think I am going to keep it. I also have a W3520 on the way. Looking forward to your results.Quote:
Originally Posted by jcniest5
@road-runner Nice clocks!:up: I like the volts at 4.4GHz. Did you get your Xeon from NewEgg?
i7 920 [3851A375]
Water cooling the max clock test
4 cores 8 thread
Intel Core i7 920 Nehalem [3851A375]
DFI Lanparty UT X58-T3eH8
CORSAIR DOMINATOR 12800 2x6G
GeForce 7300GS
CORSAIR CMPSU-1000HX 1000W
WATER
http://cfile2.uf.tistory.com/image/1...4A0CC35A2D6326
http://cfile22.uf.tistory.com/image/...4A0CC35A2E31F8
http://cfile5.uf.tistory.com/image/1...4A0CC1C72CEC98
21x222
4669MHz 4 cores 8 thread
http://cfile2.uf.tistory.com/image/1...4A0CC1C82D960B
21x225
4727MHz 4 cores 8 thread
http://cfile2.uf.tistory.com/image/1...4A0CC1C92E2E02
21x228
4794MHz 4 cores 8 thread
http://cfile2.uf.tistory.com/image/1...4A0CC1C92F6BA3
21x229
4811MHz 4 cores 8 thread
What's your batch#? Did you order it from that Pao_Revolt also? Same batch, then if you did.Quote:
Originally Posted by ShoNuff
I got a 920 from him batch 3849A895 that is a worse chip than my 920 C0. This W3520 came from NewEgg, its a 3848A352...Quote:
Originally Posted by jcniest5
namegt,
What mobo did you use for your 229x21 screen? Also, did you find that your max clock did or did not track well with Vcore? That is, many 920s, both C0 and D0 seem to reach their peak at relatively low voltage, so I'm wondering if you kept getting more CPU clock as you went to 1.45, 1.50, 1.55 etc.?