Commando Results by Tony and Andre (and others...)

Printable View

Show 100 post(s) from this thread on one page

02-05-2007, 09:05 AM
Revv23

Quote:

Originally Posted by HermS

I don't know how much further it would go, that run was just part of a battery of tests I was running at 3.6GHz and like I say it didn't need any special treatment to get there. I've been meaning to get round to checking just how far it can go, but something always comes up and I get sidetracked :rolleyes: :D

Well 450 is what i run 24/7 on my 6400, but i have to do it 1:1 even though my ram can do 600mhz because of the P5B 4:5 bug...

so this would be sweet..
02-05-2007, 09:28 AM
PanteraGSTK

As you can see in my sig, I have an e6300 @ 3500mhz 9 hours stable. I peak out the fsb at about 528mhz, but temps are too high. From the folks that own this board, would you keep my cheap S3 and be happy, or get the commando with a possibility of the same OC?
02-05-2007, 12:09 PM
JoeBar

Quote:

Originally Posted by Revv23

Well 450 is what i run 24/7 on my 6400, but i have to do it 1:1 even though my ram can do 600mhz because of the P5B 4:5 bug...

so this would be sweet..

What P5B 4/5 bug? I'm running mine @ 424/1060 totally stable. While i've tested it up to 436/1090 and it's mem test stable but not cpu stable.
02-05-2007, 12:13 PM
bazx

been doing some tests with cascade@-105 with g.skill 512 hz

http://www.net7.info/1/6800/1m.gif
02-05-2007, 12:23 PM
PanteraGSTK

Quote:

Originally Posted by bazx

been doing some tests with cascade@-105 with g.skill 512 hz

http://www.net7.info/1/6800/1m.gif

Thats the mem I have!!! Did you use single or dual channel? I'm wanting this board now... Did you use any advanced memory cooling?
02-05-2007, 12:24 PM
LittleDevil

@Dani, thanks for picture, what is the highest FSB on your mobo?

@bazx: i have completely the same PI as you, but on P5B ;)

http://ld-phasechange.com/images/x6800/5.JPG

Regards
02-05-2007, 12:43 PM
bazx

Quote:

Originally Posted by PanteraGSTK

Thats the mem I have!!! Did you use single or dual channel? I'm wanting this board now... Did you use any advanced memory cooling?

the ram is dual channel@ 2.5v just a fan

ld it was about time i used this cascade:D
02-05-2007, 12:49 PM
LittleDevil

@bazx: :toast: try some tweaks, you can reach 10.0xx sec with that speed :p:

regards
02-05-2007, 12:50 PM
PanteraGSTK

Quote:

Originally Posted by bazx

the ram is dual channel@ 2.5v just a fan

ld it was about time i used this cascade:D

Not to bother you, but did you have to vmod your board to get that vdimm? I'm guessing no. Looks like thats what is holding me back. I can't decide if I want to modd mine, get a p5b-d or wait for new BIOS's for this board...It never stops does it?
02-05-2007, 12:52 PM
PanteraGSTK

Quote:

Originally Posted by LittleDevil

@bazx: :toast: try some tweaks, you can reach 10.0xx sec with that speed :p:

regards

I've looked everywhere for memory "tweaks". Could you point me in the right direction?
02-05-2007, 01:49 PM
Viss

Quote:

Originally Posted by JoeBar

What P5B 4/5 bug? I'm running mine @ 424/1060 totally stable. While i've tested it up to 436/1090 and it's mem test stable but not cpu stable.

Try 450 fsb and youll probably see.

Quote:

Originally Posted by bazx

been doing some tests with cascade@-105 with g.skill 512 hz

[IMG]

Very nice with 2x512.
02-05-2007, 01:56 PM
bazx

Quote:

Originally Posted by PanteraGSTK

Not to bother you, but did you have to vmod your board to get that vdimm? I'm guessing no. Looks like thats what is holding me back. I can't decide if I want to modd mine, get a p5b-d or wait for new BIOS's for this board...It never stops does it?

no it never stops lol

the commando comes with more then enough vdim altho this one is now vdrop/vmod

but tbh you only need vdrop to hit 5 gig as the m/b will give you 1.8
02-05-2007, 04:11 PM
PanteraGSTK

Quote:

Originally Posted by bazx

no it never stops lol

the commando comes with more then enough vdim altho this one is now vdrop/vmod

but tbh you only need vdrop to hit 5 gig as the m/b will give you 1.8

For me, do you think there is a reason to get a commando vs a p5b-deluxe?
02-05-2007, 05:37 PM
erwinz

Quote:

Originally Posted by bugkalot

need help,

Core 2 Duo x6800
Asus Commando
Corsair Dominator 8500

http://img252.imageshack.us/img252/6020/ccpuzbs6.png
Vcore = auto
Fsb = 1.5
NB = 1.5
Mem = 2.2
SB vcore = 1.6
SB chipset = 1.12

i can't reach 3.3Ghz above, my pc won't boot, any suggestions?

my goal is 4.0Ghz

thank you very much !!

bro Up your vcore.. :) and use your multi.. :) your using X6800.. :) hehhehe..

*pm me @ tpc.. :)

:woot:
02-05-2007, 05:38 PM
swiftex

Quote:

Originally Posted by Bludd

Hey guys, I bought some silicone in a tube (I presume this is what is referred to liquid silicone) and I am about to apply it to that coil thing that is making the buzzing/squealing sound.

I have a question, though, how should I wait before using the machine again? On the tube it says that it stops being sticky after 1 hour and it "hardens" all the way through in 2-5 days. So, do I have to wait 1 hour, 2-5 days or 10 minutes? :)

squirt and run, unless you wanna stop for a beer
02-05-2007, 05:40 PM
swiftex

Quote:

Originally Posted by Revv23

wow 4:5 at 450fsb, i might need a commando.

what you waitin for?
02-05-2007, 05:43 PM
swiftex

Quote:

Originally Posted by Revv23

Well 450 is what i run 24/7 on my 6400, but i have to do it 1:1 even though my ram can do 600mhz because of the P5B 4:5 bug...

so this would be sweet..

i have'nt tested but i know a few guys tested the 4:5 with good results, similar to 2:3 in spi. needs further tests and done with 601 bios original release.
02-05-2007, 08:37 PM
Dani

Short test with 1:1 (BIOS 0803)
I will finetune more when I have time.
Watercooled CPU / NB

http://koti.mbnet.fi/dani69/ASUS_Com...16FSB_1to1.gif
02-05-2007, 08:52 PM
xs64

I got problem when oc 1:1 with my E6300, even my Ram can do well at 1100Mhz , can not pass 490Mhz
What should i do ? increase more Vcore or NB Volt ect ?

I'm at 6x490 , Mem 1:1 5-5-5-13 2.2v
All Volts are at default
02-05-2007, 10:37 PM
revogamer

looks like a great board.
02-06-2007, 03:51 AM
Varsos

Jumped to Commando vagon two days ago (after AW9D-MAX) and this is my first result with 601 bios.

http://users.tellas.gr/~georgefilos/...S/Commando.JPG
02-06-2007, 05:34 AM
LittleLaLa

A quick test for 445FSB, 4:5 ratio :)
Can never be done by my P5B-D, it was sold.

http://bbs.ocqq.com/attachments/foru...feGLPZVAOc.jpg
02-06-2007, 06:11 AM
Gligy

Here are my 24/7 settings. Watercooled CPU & VGA.
http://img442.imageshack.us/img442/2...m247tq2.th.jpg
02-06-2007, 07:23 AM
HermS

Oooooh lots of results coming in now, good work fellas... all of you! :toast:
02-06-2007, 07:27 AM
LittleDevil

@Dani: 516FSB is this Memory limit or mobo limit? What is your highest FSB on that mobo for superPI?

regards

Show 100 post(s) from this thread on one page