Damn c5:shocked: awesome job.Quote:
Originally Posted by nacho_arroyo
Hey Cryptik, 1.45VTT and 1.68-1.69vdimm, I dont normally mess with memory to much but this board seems to do very well.
Printable View
Damn c5:shocked: awesome job.Quote:
Originally Posted by nacho_arroyo
Hey Cryptik, 1.45VTT and 1.68-1.69vdimm, I dont normally mess with memory to much but this board seems to do very well.
How ya getting on, Radaja?
latest version of AIDA64 recognizes the board now but the voltages are still way off
My Classy just suffered the dreaded "FF" bug...!
RMA time... :(
kup - Remove and reseat your BIOS chip?
Yeah, didn't fix it. :( I was suffering from a no gpu load kind of glitch so I rebooted. One of my 460 powered the fan fan slow (normal) and one at full speed. I've got to try one more time and then it's off to EVGA if they'll take it. :(
@kup: That sucks about your board.
Is this common problem with Classified boards?
From what I can see it's not a common problem but it is a problem... :(
Classified3 ordered. :D
Congrats, but still sucks you have to repace your board.
Yeah. :( Stupid bug. I'd attribute it to some sort of chipset failure as it doesn't register a lack of ram, gfx or even CPU. lol It happened directly after both of my gfx failed to submit to any load (F@H) for no reason. I assumed a reboot would fix it. Wish I'd just left it running now. :/
Took the 930 out and stuck this 920 in that has been in my UD7 for a long time. Will see if I can lower vcore later but this was the first boot with this chip in this board.
http://img707.imageshack.us/img707/8...otinclassi.png
Uploaded with ImageShack.us
Good enough for me, will try and lower vcore.
http://img233.imageshack.us/img233/3...lassified3.png
Uploaded with ImageShack.us
That is a niiiice random test. :D
How are you liking the 3?
Thanks.
Man I hate to speak to early but I love this board, it seems to be pretty awesome. Just hope its as durable as my UD7.
HT disabled, single 460 this run.
http://img258.imageshack.us/img258/3...60singleca.png
Uploaded with ImageShack.us
ok i finally got my E760 somewhat figured out.
thanks zsamz and OC Nub for the tips and help:up:
21x215@4503 HT on w/1.34v DDR3-1715 7-7-7-21
Prime95 Blend 1hr 20m running
http://i51.tinypic.com/2ik34gn.jpg
Prime95 Blend 1hr 20m stopped
http://i54.tinypic.com/fnxtzm.jpg
bios settings
Code:Frequency Control
CPU Clock Ratio ( 21X )
CPU Host Frequency (Mhz) ( 215 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 3440Mhz (x16) )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 105 )
Memory Feature
Memory Control Setting (Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 21 )
tRFC Setting ( 88 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.40v )
CPU VTT Voltage ( +100 )
CPU PLL VCore (1.57v )
IOH PLL VCore ( 1.57v )
QPI PLL VCore ( 1.15v )
DIMM Voltage ( 1.61v )
DIMM DQ Vref ( +0 )
IOH VCore ( 1.17v )
IOH/ICH I/O Voltage ( 1.50v )
ICH VCore ( 1.15v )
VTT PWM Frequency ( 610 )
CPU PWM Frequency ( 940 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s)
finally you low voltage freak you lol:p:Quote:
Originally Posted by radaja
Nice job radaja, your voltages look great. :up:
hey, radaja, pay attenction at that high PWM frequency.
the mosfet and chockes that hold the VTT voltage become really hot even with the CPU at LN2 or SS.
i wouldn't imagine with water/air cooling.
plus i'm not sure that you need it that high.
http://www.pctunerup.com/up/results/...3_DSCN0886.JPG
thats my problem with the vtt pwm and cpu pwm at anything but what i have set,everytime i boot at 215 my bios screen appearsQuote:
Originally Posted by Mafio
with just a thin blue line then the full bios screen shows up and same with my windows version choice screen(XP or vista) it appears
real slow starting from the top and wipes downward depositing the screen,then when in windows(if im lucky) everything is stuttering
and choppy.with it set like i have it its normal and instant(bios screen and windows selection screen just appears like normal)
i have AC blowing directly into a box where my MB is with fans blowing over the cpu socket area.i think my temps are decent
after 1hr 20m vrms and Nb never went above 30c.but i will keep an eye out on the heat and try to see if i can figure something
out where i dont need to have vtt and cpu pwm frequency set so high
my cooling solution
http://i54.tinypic.com/16rshw.jpg
closed with AC going in,and AC into RAD
http://i51.tinypic.com/2n03b68.jpg
i get stuck at this screen too which just hangs until i reset
http://i51.tinypic.com/1e8g83.jpg
loving ghetto stuff like that :rofl:
i thought that you use a case like many of the guys here, that's because i told you about VTT mosfet/chokes temp.
with this solution probably their temp is in the safe range.
p.s. maybe would be better switch to a SS/water chiller, the power consumption should be about the same but the temp would be much better :D
edit: i see in your signature that you have a 3x2 gb kit of STT 2000 cas8 just like me.
can you run them at rated speed super-pi 32M stable?
i've alot of problem when using DRAM multiplier different to 2:8, at frequency higher than 1700 MHZ i get ONLY freeze or reboot when doing 32M.
with many other kit i haven't problem to run about 2400 MHZ 32M stable, but with elpida hyper RAM i've always problem.
kingston hyperx 2000 cas8 MGH-E works a bit better but over 2020/2030 MHZ they go just like STT over 1700 MHZ.
to be honest this is a bit frustrating...i need to test them with another board, maybe a gigabyte ud7 rev 2.0
yea i have a corsair 800D and an antec 900
but i like my homemade bench table(MB box)
and cover(cardboard box).so easy to switch
out gear:rofl:
also i dont have to worry about my box getting
scratched up.:ROTF:
i love that caseQuote:
Originally Posted by radaja
i will make one next year:yepp:
you should get the fan blowin straight into nb;)
i tried it blowing directly into it but temps were now different.the orange fans run at 4900rpms so its loud and blowing like crazy inside:DQuote:
Originally Posted by zsamz_
radaja......you are a GHETTO gangsta!!! :up::up:
So can someone confirm this for me... does the Noctua NH-D14 NOT fit on the Classified 3's? (without modifications)
yep,if it works and is convenient then im all for it:DQuote:
Originally Posted by Expat GriZ
whats the best bios for the E760 when running elpida hyper MGH-E's?
from what i can tell from reading the thread s61j seems to be the best?
I use one of those orange TT fans on my nb, very loud but an awesome spot cooler.Quote:
Originally Posted by radaja
If you got the board used was it tested for max bclk? From what it sounds like it does the same thing my rex3 does, at 215bclk or higher it is very flaky. Also sounded like you were in slowmode but you have qpi freq set to fast. Try running some 3D, like 06 and see how it does. I lost performance at 215bclk on the r3e.
i thought i almost had it figured out.i was able to run normally with the vtt/cpu pwm at stock
byt running x17 uncore.at x16 is when the issues showed themselves.but im still experiencing
strange issues with consistency.after failed OC i clear cmos and get a screen saying this
and it just hangs until i turn it off and clear cmos again.hitting delete does nothing with this screen?
also i get sometimes the normal first boot screen but where it says memory testing the numbers go carzy (i guess its testing memory)but it never stops
until i reboot?
http://i53.tinypic.com/1h2pl2.jpg
I get that screen also after a bad failed oc, or similar. Mine says no keyboard detected.....press F1 to continue lol, Del to enter setup. I hit reset button a couple times and that doesnt fix it I clear cmos. It doesnt recover as well as the Gigabyte, but I really like this board a lot.
i see a lot of people setting the CPU PLL VCore and IOH PLL VCore @ 1.5 , i keep it @ auto which is 1.8 IIRC is that ok or should i lower it to 1.5 ?
my setup : E760 Classified - 980x - 6gb Dominator GT 1866c7
1.8V is default so yes, it's ok. Sometimes lower value gives you small gain but nothing special. It's more important to lower it when you go with subzero (read LN2), but if it works the same on air with 1,8 and 1,6.. why not? :)
i found my problem and it seems to be the opposite to mafio's MBQuote:
Originally Posted by Mafio
i can now run with vtt and cpu PWM at stock with both my i7-920's
but i need these to be set to less for anything above 200bclk
CPU impedance - less
QPI signal comp -less
im 100% stable at 21x 215@4505 and absolutely no weird issues i was experiencing.
but if i reboot and set these to auto it starts up.
Nice work radaja, glad you figured it out.
i forgot to tell ya about that setting:ROTF:Quote:
Originally Posted by radaja
glad you figured it out
as soon as i get my psu back i'm joinin ya:D
Got it to boot at 4920mhz 4cores 4threads, better than my ud7 did.
http://img830.imageshack.us/img830/2811/e7704900.png
Uploaded with ImageShack.us
nice OC OC Nub:up:
do you run with vdroop or without?
without is LLC enabled correct?
at lower voltages with out is similar to level 1 LLC
on my gigabyte MB but once i go above 1.43v the drop
in load vcore is huge.but i dont like how with is like level 2
slightly higher than whats in bios during idle and load?
Thanks radaja.
I have been running it with vdroop, I dont like the way it over volts either when using without. Would be nice to have 50% or LLC1, maybe EVGA can call "kinda without" lol.
Yes it fits ... but only if u set it facing down ... so it will be blowing the air to the top of the case:)Quote:
Originally Posted by batmang
"kinda without vdroop" is perfect for LLC 1 and "without vdroop" LLC 2:rofl:Quote:
Originally Posted by OC Nub
We have Classified3! My Classified(1 or 2? :P ) is going back to EVGA for RMA. :D
So, that CPU and QPI Signal set to less really helps on the BCLK wall?
hope you get a #3:DQuote:
Originally Posted by kup
yes signal to less does help
could help, but it's not sure...maybe your mobo like less, maybe not.
mine with both auto boot at 245 BCLK, with less no boot over 180 BLCK.
but maybe that's another problem of my second crappified.... :rofl:
Cool. It fixed my wall instantly. :) 218 MAX on 5 boards and now with that one change, 220 Folding/Priming. :D Cheers guys!Quote:
Originally Posted by zsamz_
EDIT: 225MHz and still Folding/Priming. :D
kup,could you fill in the template for 225 bclk for me so i can compare
other templates and see if i can figure out how to go above 217bclk.thanks
Code:Frequency Control
CPU Clock Ratio ( 21X )
CPU Host Frequency (Mhz) ( 225 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( MHz(x16) )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Control Setting (Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 74 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( )
CPU VTT Voltage ( )
CPU PLL VCore ( )
IOH PLL VCore ( )
QPI PLL VCore ( )
DIMM Voltage ( )
DIMM DQ Vref ( +0 )
IOH VCore ( )
IOH/ICH I/O ( )
ICH VCore ( )
VTT PWM Frequency ( 250 )
CPU PWM Frequency ( 800 )
CPU impedance - ( )
QPI signal comp ( )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s)
Trying WPrime 8 threads, cant seem to get over 4800mhz. this was my best so far.
Hi all.....Quote:
Originally Posted by OC Nub
OC Nub please....:worship: could you fill in the template for your great bclk....
THX....
Quote:
Originally Posted by radaja
Hope that helps ya dude. My VTT and a couple of voltage can happily be lowered but I've not got round to testing fully yet.Code:Frequency Control
CPU Clock Ratio ( 19X )
CPU Host Frequency (Mhz) ( 225 )
MCH Strap ( 1067 )
CPU Uncore Frequency (Mhz) (3200MHz) (or whatever would be 3200 @ 200 bclk)
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Control Setting (Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( 60 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore (1.37500) (far to high for my clocks but just for testing)
CPU VTT Voltage (+225) (can go lower)
CPU PLL VCore (1.8)
IOH PLL VCore (1.8)
QPI PLL VCore (1.2)
DIMM Voltage (1.65)
DIMM DQ Vref ( +0 )
IOH VCore (1.2)
IOH/ICH I/O (1.6)
ICH VCore (1.2)
VTT PWM Frequency ( 250 )
CPU PWM Frequency ( 800 )
CPU impedance - (less)
QPI signal comp (less)
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Enabled ) (Doesn't seem to make a difference, personal preference for my Virtual Machines)
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s)
thank you much kup:up:
just to be sure,you only need 101 pci-e?and IOH/ICH I/O (1.6) is 1.60v? or 1.16?
going to give it a go and see if i can figure this out:D
http://i54.tinypic.com/35244es.jpg
Like that. :) And yeah, only 101MHz PCIE so far. :)
I will have to try it again, I am bad about saving settings so Im not sure what everything was set to. I know I had CPU Impedance and QPI signal set to less and went up a notch on both VTT pwm and CPU pwm Freq. Vcore and VTT were pretty high but the exact value Im not sure.Quote:
Originally Posted by Vinsent
Thank you very much wait your news.....Quote:
Originally Posted by OC Nub
My classified 3 should arrive next week.....:mad:
I have a 3x1gb kit of HyperX 2000c8 elpida hypers, cannot get this board to see 3 sticks no matter what I do. Have done long cmos clear by removing battery, windows sees only 1.99gb. Anyone else have HyperX running on this board?
The mem runs great on the UD7 and also ran ok on the Rex3.
thanks,101 is great for 225:up:Quote:
Originally Posted by kup
have you tried switching them to different slots?sometimes helps?Quote:
Originally Posted by OC Nub
on some high clocks it happens needs more vtt:(Quote:
Originally Posted by OC Nub
but thats weird with 3x1 should be alot easier
my 3x1 hyperx 2k cas8 did 2k cas7 easy
its when i put in 6x1 i had problems doin cas7 but cas8 was np
on another note i got me 12gb of redline with bbse:D doin 1683mhz 6-7-6-18
Will try switching slots. Even at stock it reads only 1.99gb usable, I have tried several times but same thing everty time. I had hoped these would clock really nice on this board, they did better than my Dominators on the UD7.
Which kit is that zsams? Nice clocks.
Nice job. :up:Quote:
Originally Posted by kup
This board seems to clock better than your E760?
Before when I would try a different board after about a week, sometimes less I couldnt wait to get back on the UD7, always felt good to be back on a Gigabyte board. Cant say I have missed the UD7 this time. This board feels very stable and clocks like a beast. I still love the UD7, it has been a great board and still works as well as the day I got it, but its nice to change every once in a while and learn something new.\
Also latest AIDA64 v1.20.1150 reads voltages somewhat correct now on the E770, and shows NB and VRM temps.
NP. :)Quote:
Originally Posted by radaja
I know what ya mean, I used to love my P6X58D Premium but these EVGA just piss all over it. :D I think this E770 clocks better, it certainly seems cooler.Quote:
Originally Posted by OC Nub
http://www.xtremesystems.org/forums/...postcount=4519 :up:Quote:
Originally Posted by OC Nub
Thanks, I didnt use a tooth brush but I did clean the pins on the memory with alcohol and it sees all 3 sticks now. This time it didnt drop a channel.
my set of hyperx did best with the rexIIIQuote:
Originally Posted by OC Nub
its the 1600 redline with bbse rated 6-7-6-18:D
its best for my daily rig as i wont have to actively cool them compared to my hypers
i know the rexII prefers bbse cause of qpi droop n ram droop especially for 12gb and they dont need as much juice as hypers
nice tip Bullet92
edit: finally got 215x21 + 12gb of memory @ 1716mhz @6-7-6-18 to run stable on the rexII :p
nice:up:Quote:
Originally Posted by zsamz_
Nice job zsams.
Keep trying to go higher but Im out of my comfort zone now and dont know the right settings, this is with fast mode disabled.
hi there, yesterday i did a quick LN2 session (3 hours or so).
i don't have a great CPU but this session end up with a bunch of pretty good runs.
http://mafio.host56.com/imagehosting/?dt=412895772649 http://mafio.host56.com/imagehosting/?dt=16128957732714 http://mafio.host56.com/imagehosting/?dt=6128957735213
Config:
6.47.031 // 5230 MHZCode:i7-950 #3936A695
EVGA 3-way SLI Classified - bios 77
STT 3x2 GB 2000 cas8 MGH-E-Hyper
nVidia 6200LE 256 MB PCI-E
WD scorpio 160 GB
PC Power & Cooling 1200 watt
CB -119° C
CBB -110° C
Guglio's CPU POT rev 2.0
http://mafio.host56.com/imagehosting/?dt=712895741693
http://mafio.host56.com/imagehosting/?dt=812895774863 http://mafio.host56.com/imagehosting/?dt=812895775080 http://mafio.host56.com/imagehosting/?dt=2128957753013
if someone is interested here are the settings used.
booted at -107° C then when i was in windows i used -115° C +/- 3.
at lower than -120° C IMCH coldbugged, next time i need to try with memory in dual channel and lower CPU temp...maybe this way i can squeeze some more MHZ out of the CPU.
unfortunately after about 3 hours the mobo went crazy, so i had to stop benching.Code:MAIN
CPU clock ratio - 23x
BCLK - 228
MCH strap - auto
Uncore - 22x
RAM - 8x
CPU clock skew - 300
NB clock skew - 0
Spread spectrum - disabled
PCI-E freq - 105
OC recovery - disabled
Turbo Performance - disabled
CPU features
SpeedStep - disabled
Turbo - disabled
C*E - disabled
executive disable bit - disabled
VT - disabled
HT - disabled
Core number - 2
QPI control settings - enabled
QPI link fast mode - enabled
QPI frequency - 4800
Memory features
CH interleave - 6
RK interleave - 4
Mem low gap - auto
CL - 6
tRCD - 6
tRP - 4
tRAS - 18
tRFC - 52
Command rate - 1t
tRRD - 4
tFAW - 20
tRPT - 2
tWR - auto
RTL 1 - 69
RTL 2 - 71
RTL 3 - 73
tsrWrTRd - 13
Voltage features
Vdroop control - without vdroop
VCORE - 1,59375 // 1 step more = no post
VTT - +400
CPU PLL - 1,800
IOH PLL - 1,800
QPI PLL - 1,300
VDIMM - 1,800
DIMM ref - 0
IOH core - 1,300
IOH/ICH/ I/O voltage - 1,5
ICH core - 1,05
VTT PWM freq - 610
CPU PWM freq - 1333
CPU impedance - less
QPI signal comp - auto
Nice :up:
Thanks for the template. Im on water, maybe I am at the limit idk.
niceQuote:
Originally Posted by OC Nub
but i see you miss slow mode lol
lol yes, had no choice. set 240bclk in bios with no slowmode and it laughed at me on boot.
she was lauphin with ya :rofl:Quote:
Originally Posted by OC Nub
n teazin you:D
^ lol, maybe Ill try the rex3 again with slowmode. I never really gave slowmode a chance, was so pissed about bclk limit for fast mode.
Installed the P55FTW today in my other case, but got bored fast. Did manage this by mistake. Not sure if I forgot to change bclk after backing down my oc or what, but this booted. http://valid.canardpc.com/cache/banner/1481261.png
managed to get this also. NO SLOWMODE zsams lol
OC_Nub, what VTT and vDimm are you running for those Corsair @ 235 bclk?
I took the corsair out, was afraid of killing them, was using up to 1.7vDimm and 1.60vtt. Started using a 3x1gb kit of hyperx, so far 1.74vDimm and 1.6vtt. I need to stop before something dies but its kind of fun.
Haha, yeah it is. :D Cheers dude. I'll try for some more bclk.
play with the hyperx they pretty hard to killQuote:
Originally Posted by OC Nub
@least with kingston you will get the new elpida chips;)
corsair has the powerchip shaft commin if you kill em
Just got my board last week. Having some crazy issues with my ram on this board. Kingston Hyper-X 2,000mhz 8-8-8-24 t1 3 x 2gb kit. I can get it to run all the way up to 4.2 @ 2,094mhz with 209 bclk. Anything after that it refuses to boot into windows. I'm sure someone has a easy fix for it. And i have tried 103 -110 pci-bus speed also with no results. Here is what i am running right now.
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 209 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 3860 Mhz { 20X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 103 )
Memory Feature
Memory Control Settings ( X.M.P 2 )
Memory Control Setting ( Enabled )
Memory Frequency ( Auto)
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( 2.5 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.247 )
CPU VTT Voltage ( +300 )
CPU PLL VCore ( 1.425 )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.500)
IOH VCore ( AUTO )
IOH/ICH I/O Voltage ( AUTO )
ICH VCore ( 1.050 )
VTT PWM Frequency ( 250KHz )
CPU PWM Frequency ( 940KHz )
CPU Impedance (Less)
QPI Signal Comp (Less)
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Disabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )
OC Recovery ( Enabled )
As i can't find a good stop for the ram. as it is either 1866mhz or 2,133+ on up. My R2E was a little easier on the ram setting up. So i'm sure it is something simple that needs to be changed. As i would like to show my old R2e up as it hit 4.6ghz with ease. Now i'm changing stuff right and left in the 760 bios. Thanks
You shouldnt need 1.50v for QPI PLL, thats way to high, try 1.75-1.20v, try setting IOH Core manual to 1.175-1.20v or in that range, and try setting IOH/ICH I/O Voltage to default 1.500v. Also try Memory Control Settings Standard , can do better without XMP Profile, and Memory Control Frequency to 2:10 if you want 2000mhz+. Its hard to get stable above 2000mhz, will need some VTT and maybe more Vdimm. Im not on the E760, maybe someone with that board will have better suggestions. Also try a DMM to test DRam voltage using the easy read points on the board, my board over volts memory a little.
OC_NUB can I see your template for 4.5ghz ?
This has worked pretty good for me.
Frequency Control
CPU Clock Ratio ( 21X )
CPU Host Frequency (Mhz) ( 215 )
MCH Strap ( 1333 )
CPU Uncore Frequency (Mhz) (x17)
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 105 )
Memory Feature
Memory Control Setting (Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( 60 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore (1.4375 ht disabled) {1.4625-1.475 ht enabled, cant remember exactly with ht, load vcore is 1.411v)
CPU VTT Voltage (+75)
CPU PLL VCore (1.50)
IOH PLL VCore (1.50)
QPI PLL VCore (1.175)
DIMM Voltage (1.60)
DIMM DQ Vref ( +0 )
IOH VCore (1.175)
IOH/ICH I/O (1.500v)
ICH VCore (1.050)
VTT PWM Frequency ( 250 )
CPU PWM Frequency ( 800 )
CPU impedance - (auto)
QPI signal comp (auto)
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( disabled)
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s)
Try these settings.Quote:
Originally Posted by KILLER_K
OC_NUB do run this setup 24/7 at 4.6 ? at these volts ?
I run it 215x21/4.5ghz with these settings 24/7. The chip was in my last motherboard running 4.5 for probably 6 months or so.
Same template as above, 230MHz BCLK 3D stable so far (Black Ops for HOOOOOURS! :D).
Tried those settings and it just freezes at the windows logo each time.Quote:
Originally Posted by Bullet92
Congrats, Great bclk for gaming lol. These boards are pretty sweet. Looks like the 218bclk wall is far behind you now.Quote:
Originally Posted by kup
well i finally got above 217bclk:D
thanks zsamz,mafio,OC nub and kup for all your guy's help :up:
vcore is way high ,needed to rule cpu(vcore)out 100%:D
http://i56.tinypic.com/2ltorbm.jpg
http://i54.tinypic.com/16a74m9.jpg
Nice radaja. :up:
Will you switch back to Giga now or keep testing the E760?
good work radaja :yepp:
What about more vCore?Quote:
Originally Posted by KILLER_K
thanks,i will test this one for a while and then make a decision.i know i couldnt do 226 bclk stable on the the UD5 but could on my last UD3R,i could boot and run the quick superpi 1m at 230 with the UD5.but it looks like with this E760 230 stable might be possible for sure:DQuote:
Originally Posted by OC Nub
thanks:DQuote:
Originally Posted by Mafio
I didn't read all good job you guys are doing for raising the BCLK-wall. Could somebody give a quieck summery on important adjestments.?
I'm trying to pick some idea to use on SR-2. Diffeent BIOS and chipset may make a big different though, but it's worth to get some ideas and trying.
Went up on the vcore as high as i should have needed but nothing helped. It is probably a setting i am over looking though. I will keep trying.Quote:
Originally Posted by Bullet92
guys cpu n qpi signal less = usin less volts:D
some boards might be ok for auto:p:
i was gonna post my 231blk x21 template but i need to tweek it
as soon as i get my psu back ....
ti'll then:p:
Post it and give me some ideas. I need something else to compare mine to now.Quote:
Originally Posted by zsamz_
I think cpu & qpi signal less or auto is different for everyone.
Do you guys know, if a Q3QR runs on a Classified withou a mod?
i finally got 230bclk stable,thanks to zsamz:D
now i just need to up the multi and lower some timings
and i will be in heaven:)
http://i54.tinypic.com/2eyj7ec.jpg
http://i56.tinypic.com/24n2zba.jpg
heres my settings,i now need to tweak some voltages down
but it makes a good starting point for others.
Code:Frequency Control
CPU Clock Ratio ( 15X )
CPU Host Frequency (Mhz) ( 231 )
MCH Strap ( Auto)
CPU Uncore Frequency (Mhz) (3910MHz x17)
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 113 )
Memory Feature
Memory Control Setting (Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore (1.32500)
CPU VTT Voltage (+150)
CPU PLL VCore (1.8)
IOH PLL VCore (1.8)
QPI PLL VCore (1.35)
DIMM Voltage (1.63)
DIMM DQ Vref ( +0 )
IOH VCore (1.35)
IOH/ICH I/O (1.65)
ICH VCore (1.12)
VTT PWM Frequency ( 250 )
CPU PWM Frequency ( 800 )
CPU impedance - (less)
QPI signal comp (less)
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Enabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s)
WOW Great job radaja.:up:
Well done dude! :D
EDIT: Was PCIE @ 113 essential for you?
thanks,couldnt have done it with out your helpQuote:
Originally Posted by OC Nub
thanks for your help in understanding the boardQuote:
Originally Posted by kup
well i havent tried lower yet,but now that i have a solid 230
i will test individual voltages and setting to see whats needed
and whats excessive.will post my findings and leave an updated template:D
congrats:up:Quote:
Originally Posted by radaja
i got my psu back from rma :D i'm right behing ya:rofl:
kup: i dont have to put template up now :p:
finally a decent memory score,at least for me:D
still working on lowering stuff(volts)but soon i will have
this MB nailed down and make it do what i want:rofl:
http://i55.tinypic.com/9uvgc1.jpg