0601 batch
with FX57 DFi ultra-d 702-1 bios
1:1
DDR500
http://premium1.uploadit.org/gskill/2GBZX/0003.JPG
working on 166 now... look like ok now!
32M 4th loops
Printable View
0601 batch
with FX57 DFi ultra-d 702-1 bios
1:1
DDR500
http://premium1.uploadit.org/gskill/2GBZX/0003.JPG
working on 166 now... look like ok now!
32M 4th loops
with 166 looks like no problem to me
http://premium1.uploadit.org/gskill/2GBZX/0004.JPG
i guys, sorry for my english, but i'm italian and speack little english.
I have a problem, why my 2x1gb gbzx at default, when i execute a test for the ram, like memtest or goldmemory, the program find many error, example, memtest find over 100000 errors.
The ram at 230 3-3-3-8 are stable, but my CPU are at 2070Mhz
Can help me?
tnx a lot
Quote:
Originally Posted by fritzen
First, welcome to XS :toast:
Second, what kind of motherboard are and what rev CPU die are you on? Clawhammers are alot less likely to take tight timings then the newer 90nm dies, and cheap motherboards arent so hot with memory either.
Quote:
Originally Posted by Revv23
not yet.
I already went to 260~265mhz with the same 3-3-3-8, run prime.. run occt.. pi32mb..
But i am using 3-3-3-8 in 236mhz with opteron now.
I got my 2GB G.Skill "HZ" today, rock-stable at 530mhz (and yes, that includes gaming):toast: :
Ops sorry, this is my configuration:Quote:
Originally Posted by Revv23
Athlon X2 4400
DFI Lanparty UT Expert
2Gb g-skill GBZX
2 x WD raptor 74Gb Raid 0
WD 250Gb
Asus n7800gtx 256Mb
Enermax Liberty 620W
Nek 3550
its very strange if i put 166 divider on a64 tweaker it works, but when i do it in bios at the startup it dont pass the ram check.
with other ram I was able to run at 3.2 ghz with 166 divider, so very strange
I go try bios 702-1 now
edit
623-3 , dividers no go
702-1 , dividers no go
704-2bta , no go
I go try some other ram now, very strange If i use a64tweaker i can put my ram on dividers, and with he clockgen put it to 3.24 ghz, but in bios it just dont go on /
do you set ur read preamble and maxasync to autoQuote:
Originally Posted by Victory
i need to set that to auto at bios and using a64 to adjust it
welcome to XS sir, and very nice testing testing.
not working either, i think im stuck with 245 × 11 at 1 on 1, I will try other ram later this evening to look if its the ram problem or not.Quote:
do you set ur read preamble and maxasync to auto
i need to set that to auto at bios and using a64 to adjust it
does it do 32M 250-3-3-2-5 2.8v?Quote:
Originally Posted by Victory
for ultra-d,sli-d,sli-dr can try this bios
ops...too big can't attach.....
bios dont work either, I guess I m stuck @ 245 × 11 with this ram :(
Strange, same settings same mhz on cpu and my spi is 28min in 32mb?Quote:
Originally Posted by G.S Technician
That is a 3 min difference?:confused:
1mb spi is just over 28sec.
Is there some secret to your G.S or is it something else that can be the reason for such a difference?
I use a gigabyte ga k8n pro sli board.
Gskill zx 3200 at same settings in a64tweaker with a 166 divider.
2.8v.
cpu at 3ghz at 1.6vcore.
dualcore opteron 170.
My htt is 2 though in bios can that be a reason?
Maybe there is tweaks in windows I dont know about?
I have some extra stuff in the background since I use the comp for 24/7 but 3 min difference seems a little much to me.
i think you are not using "system cache" this option :)Quote:
Originally Posted by flopper
HUm, didnt get that?Quote:
Originally Posted by G.S Technician
Just a noob ;)
Hello all,
I got a big problem with that kit, I just can't make it work in dual channel at stock speed...
I tried all I can think of, Vddr boost (max 2.7v) Vcore boost too, relaxed timings (3 3 3 8 2T), no way to memtest86+ them, it keeps freezing my rig on test #8 (no errors, just a freeze)
Under WinXP sp2, no more than 20 sec before a complete freeze...
I tested each stick alone without any errors (4 pass). My machine doesn't even boot if I try 333 mhz.
All is running at stock speed, I don't want to OC anything and it's working perfectly with a Corsair kit CMX3200C2 2X512Mo@400 mhz.
I tried to install the G.Skill in single channel (both sticks on B1 and B2 slots : no boot, A1 and A2 slots : no boot).
Only thing that have worked : my old sticks of Corsair(2X512) on slots B1&B2 with one G.Skill on A2 : got my 2 Go working but single channel at 2T only...
My rig specs :
A64 3500+ (o,o9) 11X200, 1,4 v (I tried up to 1.55v)
Asus A8N Sli Premium (rev 1.02) bios 1009 (tried 1008 too)
GForce 6800 GS Pci-e (at stock speed too)
HDDs : 2 Ide WD and Maxtor 80 and 160 Go
Antec Truepower 2.0 550w
Any suggestions please ? I'm desperate ...
PS : forget my bad english :p
Today I got a new processor opteron 175 0550 upmw 0107, I tried a divider and it worked :) Now i know what the problem is, there seems to miss 1 pin off the cpu (amd x2 4400) I m bringing my old processor to a goldsmith to repair the pin. I go test my ram futher now, think 3.3 ghz is possible ;)
11 × 300 with a 5/6 divider ram at 240 2.5.2.3.5 timings :)
is the problem fixed for this ram yet. as stock is in australia now and i am thinking of getting a few kits.
Which kit? I'm about to buy the 2GBZX kit, so tell if that's also the kit you have that you are having problem with. My mobo is the same as yours, so let me know...thx...Quote:
Originally Posted by Nanolab
G.Skill 2GBZX DDR400...
Hello
I have a Opteron 170 and a G.SKILL 2GBZX Kit.
It runs now at 2700Mhz with the 166 divider 225Mhz-2.5-3-2-5
But setting it to 180 which results into 250Mhz runs stable to but not in games (starting game= freeze after some sec.) If I disable bank interleave the problem goes away (til 245Mhz) but it is slower than @225Mhz. If I go > 245Mhz the problem returns.
Other question:
What are the best settings for drive strength and data drive strength? my opteron won't go 2.8Ghz (prime fails after 1-2 min.) I heard that setting different drive strength settings might help ... I tryed many but nothing seems to help.
Any suggestions? Mobo is DFI NF4 LP SLI-DR Expert.
Hmmm...that's not good news for me. Maybe I will go with the HZ kit instead, what do you think?Quote:
Originally Posted by Nanolab
so HZ or ZX or are they both poo now.
wtf is the deal.. i see this allllll the time.
they kick ass when they are first released and within a month or two they are total crap.. wtf is the deal.. ocz, corsair, mushkin, gskill... they all do the same crap.
come here showing screens of how much butt they kick and within a short period of time they are producing crap sticks.
ive seen this in other industries before,, produce a butt kicking product right away to gain some high volume sales and then let quality trail off and forget about the reason the consumer is buying them.
the average joe dont buy this ram,, the overclocking joe does. so make the sticks the way the people buy them..
i see all kinds of people having issue with both the ZX and the HZ here, other furms and on newegg reviews.
whats the deal here. ? should i even waste the money on this stuff ?