thx m8 the flash workt , i had the .bin not typet now i have 16pp thx m8 :woot:Quote:
Originally Posted by Supertim0r
Printable View
thx m8 the flash workt , i had the .bin not typet now i have 16pp thx m8 :woot:Quote:
Originally Posted by Supertim0r
My connect 3d GTO will be here tommorow.. Will let you guys know how it clocks and how the flashing goes.
http://www.techpowerup.com/articles/...voltmods/112/4Quote:
Originally Posted by KoHaN69
PS: I cleared up the solder today, and its working again happily at the same speeds :D
:toast:Quote:
Originally Posted by blind_ripper
do you think its safe to have vgpu @ 1.48 with zalman vf700 and as5? idle temps are 30-32c , load max around 57c. reason is as it seems to droop about .2v under load so if i have at 1.45 i only get 1.43 under load. so at 1.48 i get a nice 1.46
i heard air is safe max 1.5v
it says 1.41 for stock cooler , 1.45 for air cooling , on techpowerup
yeah, the fan is dead on my GTO². suck it... hm... RMA oder install watercool?
eh VF700CU is good air :)Quote:
Originally Posted by pancake
what kind of clock you get ? (I think 1.55v is safe too...as long as temps are good...under 60c)Quote:
Originally Posted by pancake
I'll give my card 1.65v air when I receive ViperJohn cooling :D
it gets to around 621 in ati tool before screen goes black and i have to hard reset. do you think igpu mod would help?
highest temp it reached in over a good hour of call of duty 2 was 56.9.
im starting to get the urge to put my water cooling on it and see what itll do with 1.7v lol
I've the same problem...blank screen. It's temperature related.Quote:
Originally Posted by pancake
Watercooling should HELP a lot. 1.7v @ 660-675 ? :D
hey whate bios give u guys the highest clocks ?
these cards are fast m8 :sonic:
Why temperature related? i got 62C at 500Mhz on GPU with stock cooler and no black screens, so i guess its about low voltage :) since at 535Mhz it goes to 66C and still no black screens.Quote:
Originally Posted by Supertim0r
I've done the volt mod now :banana:
1.46 V at load on stock cooler. Fully loaded temps are 65*C :banana:
Now using ATi tool @ 600/610 MHz (core/mem) and its good so far (4 minutes, no errors)
:cool:
are you running 1.5-1.55 vgpu ?Quote:
Originally Posted by spajdr
At what voltage does OVP kick in?
from what i've heard "OVP is set internally in the regulator at about 2.250 and is not adjustable"Quote:
Originally Posted by K.I.T.T.
OVP means over voltage protection right? I mean when does that shut down your card (at what VGPU)
and i got a new 3D mark score, but it wasnt too impressive
http://service.futuremark.com/compare?3dm05=1404590
:confused:
that's a nice score on a P4 :)Quote:
Originally Posted by K.I.T.T.
thanks :)
But I was expecting more like 7k :(
What did you get at 600/600?
And what VGPU are you running now to get 640/630?
hhm dont run cpu test it will pul ur score down ;) ,
tis is my x800GTO² @ 16pp http://service.futuremark.com/compare?3dm05=1404611
bad ass core to oc , mem is very good ;)
whate bios wel give me beter oc ?
clock you p4 @ 4.1-4.2ghz :DQuote:
Originally Posted by K.I.T.T.
640/630 @ 1.58vgpu / 2.25/2.21vdd/vddq stock cooling :slap:
only stable for a 3dmark run.
best score I saved was 7138 620/630 (IIRC)
I had no internet when I benched @ 640/630 and my partition crashed with a LOT of score and pictures :(
you should try this bios (sapphire x850xt pe with vivo I disabled)
http://service.futuremark.com/compare?3dm05=1350506
Thats my GTO²@550/625
I cant clock any higher because of this stupid i915 chipset :stick: wont do over 247 MHz!!Quote:
Originally Posted by Supertim0r
I see that people with lower GFX clocks, but A64s at 2.8 GHz are kicking my GTO2.
BTW, that BIOS, which flashrom did you use? 1.58 v on stock cooling? lol :slapass: :eek: