Good :toast: but you have possibility of better optimized a64 tweaker, you are not with best the adjustments ;)Quote:
Originally Posted by Jasonhk
Printable View
Good :toast: but you have possibility of better optimized a64 tweaker, you are not with best the adjustments ;)Quote:
Originally Posted by Jasonhk
Can any of you guys give me the best A64 tweaker adjustments for optimum and most stable performance? You have seen my specs in a post I wrote earlier today.
Thanks,
Alec
What do you mean? I don't know what is going on in a64 tweaker , I just copy other peoples settings and mess around with them a bit :DQuote:
Originally Posted by boblemagnifique
I'm gonna change my cpu/mobo to a64 and I don't know which cpu to buy. I was looking for 0441 but with no results. My friend told me he has 045OUPMW & 0444XPEW. I know that 44 week overclocks to about 2500MHz but what about the 50? Anyone heard about overclockig results? I'm gonna put the phase-change on my cpu, hope to go over 3GHz.
Alec - could you please post some more info about your proc? Thx.
Well. I have a AMD Athlon 64 3200+ Winchester socket 939 CPU with a Venus 12 fan and heatsink ontop of it. Usually runs at around 37 degrees (33 degrees or less when idle... 45 degrees heavy load and 50 degrees + when overclocked to around 2.5GHz)Quote:
Originally Posted by Adasi
I ordered it on boxing day from aria.co.uk I did wrtie down the number which was on the chip itself but I have misplaced the piece of paper I wrote it on...
My motherboard is the Abit AV8 type with 256mb of Corsair XMS3700 RAM (sadly running at CAS3 :( ).
My system tends to restart itself if I try to run superpi with the RAM timings altered so it is running equivelent to CAS2.5. The absolute maximum I can get out of my CPU at this curent time is 2.5GHz, anything more and i will just restart itself.
I also have a Radeon 9800Pro which doesnt like 3d benchmarking when my system is overclocked (anything over about 2.2GHz and it will randomly halt my system...)
I hope this helps, I will try to get hold of that number for you ASAP.
Alec
2/7/12/2/1/0/2/2/1/1Quote:
Originally Posted by Jasonhk
16x/128bits/D/D/7x/6ns/6.5ns/16cliks/E/200
Quote:
Originally Posted by Alec
dude your gonna have to divide your ram and find the max cpu OC.
then lower the cpu multi and find the max ram OC.
after that you can find a good medium. :toast:
sounds to me like you need to do some reading first though bro.
you will find that all the stickies here are very helpful.
ive gotten to were i read more than i post here now:)
Alec - I would be very glad if you find the piece of paper with the chip numbers.
Danke :D
I'm still looking for a cpu and I can't find 41st week. Does anyone know anything about 50 week? Still can't find any info about it... :(
Having boot problems and cant figure it out..
htt @ 370 * 8 with default vcore np anything above 370 htt and pc crashes but anyway.
I use 300 htt with 133 ram devider so ram is running at 200 2-2-2-5 multi @ 8 x
cpu speed 2400 primes stable this is when i clock it from within windows. ( clockgen )
But if i try to set these settings in the bios pc wont even boot into the bios gets stuck on the first screen.
a64 3500
msi k8n neo2
1.36 beta bios
using sata 3
fan ( chassis ) plugged into cpu header.
cpu is prime stable at these speed's just wont set in bios and boot :/
dont mind the vcore in the screenie was trying to rule out voltage problems.
Just had some fun with my K8T Neo2-FIR (Vdimm modded) and 0447 3200+
Too bad my BH-5 ain't doing more than 250 with 2.0-2-2-5 with this board (They did 265 on DFI LP). This sucker is just screaming for Vcore mod!
CP :)
what do u guys think of this one?
ADA3200DIK4BI
CBBHD 0450UPMW
should i buy it?
week 50, yea why not
But have anyone had this week before?
I mean made o/c tests
A64 3000+ 939 0445 spbw :toast:
http://img50.exs.cx/img50/8926/28s9sz.jpg
is the 3000+ week 42 worth buying? i can get one for 150$ should i buy?
I'd wait and see if a newer week shows up...I don't think 42 is too bad tho if you do need a chip...
jjcom
even for 150$
wait for 0501
yeah, thats what I'm thinking as well...the newer the week the better some of the Winchesters are getting, so lets hope that trend holds true into 2005
jjcom
im still figureing out the bios. But ive gotten 2.6 ghz
http://img119.exs.cx/img119/2171/wow8cd.jpg
but im currently running 2.5
http://img119.exs.cx/img119/4193/untitled4dv.th.jpg
0444 XPEW
On Venus12 w/ as5 @ 2.7Ghz Pi benchable:
2700Mhz & pi's
And only screenshot stable so far (same cooling):
http://img22.exs.cx/img22/5456/2800mhzfinally5aa.jpg
Been to busy to work on it more. Damn school & work.
You suck! :stick: j/k m8 nice stuff :DQuote:
Originally Posted by Chr0n1c
well this is my best thus far.. completly un-tweaked. 0444VPMW 1.65vcore, stock air cooled (yes boxed cooler)
http://www.dataeclipse.com/wes/27winnie.jpg
My 3200+ Winnie (0433SPMW) Dry Ice cooled.
http://hem.wasadata.net/2501/turez/3200+/3206MHz1.JPG
More prints: http://hem.wasadata.net/2501/turez/3200+/
Rig Pics: http://hem.wasadata.net/2501/turez/DI/
Quote:
Originally Posted by turez
Nice job man! It was worth the headache from the fumes. :toast:
PS, nice DI container too.