Printable View
I know but for testing just ram there are much better tools, like memtest in windows. Blend is very good for testing AMD cpu's as it is testing the cores and the CPU-NB thoroughly.
I still can't get my head around the 8 hour Prime thing, two hours is more than enough for me. Prime for pleasure maybe? :D
When all the ram sticks are working full load, then cpu NB is working full load ;) And come on, I had millions of times when cpu would fail after 5-6hours of priming.two hours is way too low ;) Unless we are talking about different kinds of stability ;)
My kind is being able to fold 24/7, 365 days a year, for other casual gaming sessions ;)
tests shouls consist of 3hrs prime + 50 pass 20k linx that.Quote:
Originally Posted by Zeus
Prime find erros in NB/RAM very good, as linx is amazing for fine tunning your CPU.
My newest 1055T goes 1.35V LLC enabled (about 1.375V at load) 4050MHz, 3h Prime Large FFT. Noctua NH-D14
Other chip wasn't like this. But I think I will sell this too, bought again 4pcs of 555 BE cpus <3.
* CPU Model: AMD Phenom II X6 1055T
* CPU Stepping: CCBBE CB 1025APMW
* CPU Frequency: 4004 MHz
* CPU vCore: 1.456V
* CPU Multiplier: 14x
* CPU Turbo: Disabled
* CPU NB Speed: 2574 MHz
* HT Ref Speed: 286 MHz
* RAM Speed: DDR3-1525
* RAM Timings: 7-8-7-24-1T
* RAM Configuration: 4 GB (2 x 2 GB)
* RAM vDIMM: 1.62V
* Motherboard: GA-890GPA-UD3H
* Chipset/Socket: AM3, 890GX + SB850
* Cooling: H50 push/pull SFF21E
* Temps: 31C Idle / 58C Load
* Operating System: Windows 7
* 32/64-Bit: 64
* Stable/Suicide/Untested: STABLE Prime95 Blend 9hrs
from CPU: 9E61445F00426
http://img843.imageshack.us/img843/4166/amd1t.png
COOLING: H50 with push/pull SFF21E (intake) - switching to NF-P12-1300
BIOs SETTINGS BIOS version: FD
VCORE 1.45 DRAM CONFIG 7-8-7-24-1T
CPU NB VID 1.25 MEM CLOCK 5.33 = 1524
NB/PCI/PLL 1.8 HT LINK 8 = 2574
SIDEPORT 1.6 CPU FREQ 286
NB VOLT 1.4 CORE BOOST DISABLED
DRAM 1.6 CPU NB FREQ 8 = 2574
CPU PLL VOLT 2.5 PN CLOCK RA 14 = 4004
Going from 2002 to 2574 (29% increase) yielded the following in
Everest Cache and Memory Benchmark;
MEMORY 10% Read, 26% Write, 14% Copy, 6% latency
L2 nothing very significant
L3 10% Read, 28% Write, 20% Copy, 19% latency
http://img214.imageshack.us/img214/4446/cachemem.png
http://img46.imageshack.us/img46/4482/2574cachemem.png
note: tested at 2T timings (1t improved 2-3% in a few categories, latency most notable)
For those of you with same MOBO/ onboard vid 4290
USING ONBOARD VIDEO 4290
WEBVIZBENCH.COM = 3950 / 14.99fps 1920 x 1101 rez
USING 4670 dedicated vid card
WEBVIZBENCH.COM = 5090 / 22.23fps 1920 x 1101 rez
* CPU Model: AMD Phenom II X6 1090T BE
* CPU Stepping: CCBBE CB 1022 GPBW
* CPU Frequency: 4470 MHz
* CPU vCore: 1.536v
* CPU Multiplier: 21x
* CPU Turbo: Disabled
* CPU NB Speed: 3190 MHz
* HT Ref Speed: 213 MHz
* RAM Speed: DDR3-1700
* RAM Timings: 6-6-6-20-1T
* RAM Configuration: 4 GB (2 x 2 GB)
* RAM vDIMM: 1.72v
* Motherboard: ASUS Crosshair IV
* Chipset/Socket: AM3, 890FX + SB850
* Cooling: Water 10c / (radiators in garage)
* Temps: 18C Idle / 37C Load
* Operating System: Windows 7
* 32/64-Bit: 64
* Stable/Suicide/Untested: Stable
http://i5.aijaa.com/t/00602/6896117.t.jpg
http://i8.aijaa.com/t/00073/6896118.t.jpg
Still testing. Maybe next official bios is better because ht bouncing is not good for max stability :)
Supernice overclock Krjalone!! :up:
@Krjalone
:bows:
Rock and roll
Very nice chip you've got there Krjalone. :)
i know this might sound off topic, but i really can't think off any other thread to ask about this:
is there any 1090 1021EPMW user(s) here? I've browsed thru d chart but can't seem to find one. just gotten mine, but will be able to test only tonite. wanna check what would be d estimated clock d chip can hit... thanks in advance... :D
4,5ghz 24/7 .. awesome :up:
nice oc with 1.45 cpu volt. what bios version did you use? thxQuote:
Originally Posted by davelakecity
is WCG good enough? ive already tested my ram and mem ive just been bumping up my cpu by half multi.
while my 890GPA UD3H is in teh shop:
* CPU Model: AMD Phenom II X6 1055T
* CPU Stepping: CCBBE CB 1022 BPMW
* CPU Frequency: 3780 MHz
* CPU vCore: 1.5v
* CPU Multiplier: 14x
* CPU Turbo: Disabled
* CPU NB Speed: 2160 MHz
* HT Ref Speed: 270 MHz
* RAM Speed: DDR3-1440
* RAM Timings: 7-8-7-21-1T
* RAM Configuration: 4 GB (2 x 2 GB)
* RAM vDIMM: 1.5v
* Motherboard: ASRock 890FX Deluxe4
* Chipset/Socket: AM3, 890FX + SB850
* Cooling: Air (Thermalright True Lapped)
* Temps: 18C Idle / 43C Load
* Operating System: Windows 7
* 32/64-Bit: 64
* Stable/Suicide/Untested: Stable 24hours Prime95 Blend
Attachment 108698
Hmm, after all this cpu doesn't seem as bad as i thought:
http://img.photobucket.com/albums/v6...Prime43GHz.png
Watercooled, 20ºC ambient.
Test Linx now at 20k problem size, I will be happy to know that it passed.Quote:
Originally Posted by Zeus
No need to. If it can pass Prime for an hour like this it is good enough for me, hence i didn't doo the required 8 hours Prime. Please do not quote images. ;)
good Zeus, a bit better (+14 MHz) than my aircooled 1015 chip :D. No, seriously, nice chip. My second Thuban can not this (top at 4130 MHz).
Zeus, really nice cpu you have :). I have a 30min Prime95 screenshot at 4310MHz and 1.5V, but the temperatures were a little bit hot for my liking after about an hour, so I didn't pushed it forward and settled with the current frequency. I'm not sure it's still capable of doing it, because I had a better cooling at that time.
its strange with WC and high temps
My latest attempt, on 4GHz only thou... :p:
* CPU Model: AMD Phenom II X6 1090T BE
* CPU Stepping: CCBBE CB 1021EPMW
* CPU Frequency: 4000 MHz
* CPU vCore: 1.368V
* CPU Multiplier: 16x
* CPU Turbo: Disabled
* CPU NB Speed: 3000 MHz
* HT Ref Speed: 250 MHz
* RAM Speed: DDR3-2000
* RAM Timings: 8-10-8-26-1T
* RAM Configuration: 4 GB (2 x 2 GB)
* RAM vDIMM: 1.53V
* Motherboard: ASUS M4A88TD-V EVO /USB3
* Chipset/Socket: AM3, 880G + SB850
* Cooling: Air ( TR Venomous X)
* Temps: 41C Idle / 61C Load
* Operating System: Windows XP
* 32/64-Bit: 32
* Stable/Suicide/Untested: Untested
http://forum.lowyat.net/index.php?ac...ost&id=1854011
@ah khoo
im using the same motherboard but with a 1055T. Just notice when stress testing with linx @ 4000 and 4100 frequency my cpu was throttling down. How bout yours?
cant seem to find how to disable cpu thermal throttling in bios (maybe there is no option)
what's the load temperature when it dose that ?Quote:
Originally Posted by mrcmark
finally got around to doing this for mine
CPU Model: AMD Phenom II X6 1055T
CPU Stepping: unknown
CPU Frequency: 3640 MHz
CPU vCore: 1.368V
CPU Multiplier: 14x
CPU Turbo: 4290 / 16.5x / 1.52v?
CPU NB Speed: 2600 MHz
HT Ref Speed: 260 MHz
RAM Speed: DDR2-866
RAM Timings: 5-5-5-13-2T
RAM Configuration: 4 GB (4 x 1 GB)
RAM vDIMM: 2.20V
Motherboard: MSI K9A2-Platinum 1.0
Chipset/Socket: AM3, 790FX + SB600
Cooling: Corsair H50
Temps: 23C Idle / 45C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Untested
im using a bios temperature controlled fan speed, so at 40C its silent (50% fans speed) and by 45C its at 100% and noticeable, but not uncomfortable. if i left in on all the time my temps would be about 42C. i also left my exhaust fan at 50% which is probably not recommended if i wanted to see stable, but is my 24/7 setting.
50°C at 4000+ mhz and 52°C at 4100+Quote:
Originally Posted by demonkevy666
at 4000 mhz the throlling happens seldomly but at 4100 it happens a lot. I think my ambient is 28°C.
Im stress testing with an open case and a big fan blowing on the motherboard.