X2 550 Unlocking & Overclocking Consolidated

Printable View

Show 100 post(s) from this thread on one page

08-29-2009, 12:09 PM
Ad1tya

0929BPMW - Ad1tya - Biostar 790GX A3+ - 78DAA629 (Rebels Haven Modded BIOS) - Success - Link

http://img408.imageshack.us/img408/9...minsstable.jpg

http://www.imgx.org/files/44875_u3m1...28Large%29.jpg

Its actually my friends setup, but his account isn't activated yet. So....

Running 3.8Ghz @ 1.41v now (over 6hours Prime Stable)
08-29-2009, 12:15 PM
mattlef

Quote:

Originally Posted by Ad1tya

0929BPMW - Ad1tya - Biostar 790GX A3+ - 78DAA629
Its actually my friends setup, but his account isn't activated yet. So....

Running 3.8Ghz @ 1.41v now (over 6hours Prime Stable)

A straight multi OC or a multi+fsb?

I can only get 3.7 out of mine with the same volts...
08-29-2009, 03:21 PM
Snowman89

Is there any way to view the temps when running it as a quad? The core temps goes to -256C just xD What tmpin was the cputemp?
08-29-2009, 06:28 PM
HondaGuy

http://img33.imageshack.us/img33/367...adtempsaod.png
08-31-2009, 09:34 AM
mursaat

X2 550 0925APMW with Asrock A790GMH/128M and crappy OCZ Reaper DDR2-800 (wont even boot at 400mhz 1T with 2.0vdimm)

http://img401.imageshack.us/img401/8468/37485431.png

vCore in BIOS set to 1.40, CnC disabled (even tho it works enabled, puts the proc at 798mhz with 0.9vCore). I have to tweak the vCore, but anyways this is my moms comp and I'll leave it everything on auto with 4 cores (3100mhz, 1.30vcore, etc)

All this with the AMD HSF (72ºC with OCCT running, doesnt hang). I'm gonna leave it with maybe 1.3875vCore and CnC disabled, because now it's idling at 56ºC (it's 35ºC inthis room).

I'm a bit out of AMD OC, is it worth to overclock the FSB? It's cool the BEs are multiplier unlocked!
08-31-2009, 09:37 AM
Snowman89

Quote:

Originally Posted by HondaGuy

http://img33.imageshack.us/img33/367...adtempsaod.png

My temps doesnt show there :( Max validation now is 4266mhz on alla cores :P
08-31-2009, 10:30 AM
mursaat

Quote:

Originally Posted by Snowman89

My temps doesnt show there :( Max validation now is 4266mhz on alla cores :P

Go to Performance Control > Fan Control, there you have the FAN0 temp, I don't know how accurate it is but seems realistic to me.

Do you people think its overkill to have the proc idling at 47ºC and stressing at 70ºC?

I'm right now 1.3875vCore 17,5x200

//EDIT: Tweaking a bit more, default vCore 17x200, 44ºC idle 63ºC stressing OCCT, could be the 24/7? Temps too high?
08-31-2009, 10:33 AM
Snowman89

Quote:

Originally Posted by mursaat

Go to Performance Control > Fan Control, there you have the FAN0 temp, I don't know how accurate it is but seems realistic to me.

Do you people think its overkill to have the proc idling at 47ºC and stressing at 70ºC?

I'm right now 1.3875vCore 17,5x200

FAN0 at 42 during idle and load so i guess they dont work either.

In my opinion 70C is waaay to high. When running overclocked i would say below 60. Thats just my opinion
08-31-2009, 11:58 AM
mursaat

Yeah definitely I'm gonna settle for 1.30vCore, 17x200.

Its curious with default vcore I can get an X4 3.4ghz. 3.5ghz you need to up to 1.3875v. Make you guess if this is not a rebranded X4 965 :D
08-31-2009, 12:40 PM
BrokenWall

Wait how are you guys getting your Temp Sensors to work, my 550 when running at X2 it works fine on 790x-UD4P (F7 Bios) but when unlocked to quad it shows all cores at -256C
08-31-2009, 12:44 PM
Snowman89

Quote:

Originally Posted by BrokenWall

Wait how are you guys getting your Temp Sensors to work, my 550 when running at X2 it works fine on 790x-UD4P (F7 Bios) but when unlocked to quad it shows all cores at -256C

Thats what im wondering about to :p:
08-31-2009, 12:56 PM
mursaat

As I said above, I don't know if it's actual CPU temp, but I use the one on AMD Overdrive > Performance Control > Fan Control > FAN0.

Seems realistic, how much I don't know :rolleyes:
08-31-2009, 02:33 PM
m411b

When I run prime on a four cores @ stock clocks, core 3 has fatal errors. I cant figure out how to up vcore. I up it in BIOS but it has no effect. It stays the same..
After unlocking, are you guys using ACC on seperate cores or what? I can take this thing to 4Ghz on stock vcore but only for a few seconds, and @ 3.9Ghz I can proly validate but no where near stable.
If I could up the vcore I am sure it will help a lot!

MSI 785GM-E65

EDIT: I figured out how to change the vcore now, but I can go all the way up to 1.56v with 12% ACC on core 3 with no joy! Absolutely no stability..
09-01-2009, 02:46 AM
mursaat

Quote:

Originally Posted by m411b

When I run prime on a four cores @ stock clocks, core 3 has fatal errors. I cant figure out how to up vcore. I up it in BIOS but it has no effect. It stays the same..
After unlocking, are you guys using ACC on seperate cores or what? I can take this thing to 4Ghz on stock vcore but only for a few seconds, and @ 3.9Ghz I can proly validate but no where near stable.
If I could up the vcore I am sure it will help a lot!

MSI 785GM-E65

EDIT: I figured out how to change the vcore now, but I can go all the way up to 1.56v with 12% ACC on core 3 with no joy! Absolutely no stability..

If I were you I'd disable core 3 in AMD Overdrive and enjoy my PII 720 at 4ghz, seems like your core3 is really weak, a shame but hey,suicide X3 @ 4ghz stock vcore, that's sweet, maybe you can settle with 1.35v or so.
09-01-2009, 03:21 AM
Cheeseball

Enabling ACC causes the temp. sensors on the CPU to mess up. I've tested this with my Athlon II X2 240. -256C in AMD Overdrive, and 0C in Core Temp. Disabling ACC restores functionality.
09-01-2009, 03:36 AM
mursaat

Yeah but also "restores" only 2 cores, I for one prefer 2 free cores than knowing my temps!
09-01-2009, 07:42 PM
Dopamin3

Does anyone know if 0931DPMW is unlockable?
09-02-2009, 07:04 AM
CanadianTSi

Quote:

Originally Posted by Dopamin3

Does anyone know if 0931DPMW is unlockable?

If you look at the numbers in the first post, it seems the success rate is about 75%...
09-02-2009, 07:18 AM
mursaat

Quote:

Originally Posted by CanadianTSi

If you look at the numbers in the first post, it seems the success rate is about 75%...

He said 0931, I even googled it (0931dpmw) and all I got is this post :D
09-02-2009, 07:21 AM
Bredband

I bought AMD Phenom II X2 550BE with stepping 0923BPAW and i was able to unlock it to X4, i am so happy :-)

http://valid.canardpc.com/show_oc.php?id=684217

But i will try higher ;-)
09-02-2009, 08:15 AM
Dopamin3

Quote:

Originally Posted by CanadianTSi

If you look at the numbers in the first post, it seems the success rate is about 75%...

:doh:

I've searched all over the place but can't find anything about that stepping. The only thing that comes up is someone has a Phenom II x4 965 with the same stepping. Would that give it higher probability to unlock since maybe it comes from a good batch?
09-02-2009, 09:37 AM
ASharp

If you have the chip already, try it and tell us how it goes. It seems to be a newer batch that no one here has tested yet. There really is no definitive way of knowing if a certain chip will unlock or not. Some batches will have great success while other batches can vary from chip to chip.
09-02-2009, 01:41 PM
Dopamin3

Quote:

Originally Posted by ASharp

If you have the chip already, try it and tell us how it goes. It seems to be a newer batch that no one here has tested yet. There really is no definitive way of knowing if a certain chip will unlock or not. Some batches will have great success while other batches can vary from chip to chip.

I don't have it yet, but I am able to purchase it for slightly under retail :shrug:
09-04-2009, 11:11 PM
chromeninja

0925BPMW - chromeninja - Gigabyte GA-MA770UD3 - tried 3 BIOS FA, FB & FD - ALL FAIL!!

:( :(

Managed to post, would get to load screen of Vista and hang....tried bumping voltage a bit, but to no avail....
09-05-2009, 03:01 AM
ricsantos

did anyone had a sucess mobo with 0919 epmw + gigabyte GA-MA790FXT-UD5P?
does someone have a extra 0922 to sell?

Show 100 post(s) from this thread on one page