The one with the B2B setting available. Other than the rest, the bios version doesn't really matter. It's mainly the boards' limitation.Quote:
Originally Posted by hipro5
Printable View
The one with the B2B setting available. Other than the rest, the bios version doesn't really matter. It's mainly the boards' limitation.Quote:
Originally Posted by hipro5
what's the bios called (version nr) and is it already available in public? :)
As far as I know, all recent bios versions have this timing included. Possibly not in a final version (=public), but most certainly in a beta version.
//edit: there's a new 1.7 final, it should be included.
Are the boards we received already tested for bclk or something? Because there were still overclock settings in it when i turned it on, pretty weird.
If someone need buy cpu/gpu pots let me know at PM :) I can bring them with me to Munich.
Bios 1.81b was installed on our board... /\ Ryba u is a legend :D
the 1.81 is the lastest beta version.
nm i found it :)
Could you share that 1.81 beta bios ? :)
Still no CPU here, only have a 965 c0 where 225-227BCLK is max.. Wonder if it will arrive before we go to Germany :D
The afterburner works fine here, but ill hardmod it if i get time..
Anyone tried the mem 2000mhz+ stability mod? I cant get the board stable at 1900mhz cl8 superpi 4M, but someone else had problem with this board and micron D9JNM..
Hmm boys i still not find where i can turn of some cores
and if i turn on HT i never have it. both options turn off HT :rofl:
Just modded the board, no stability gained on the ram.. Guess the board/bios just don't like D9JNM :s
What BCLK you guys get?.... :)
235 :cool:Quote:
Originally Posted by hipro5
Mmmmffff.......We can't pass 227MHz... :(
and you can make 23x227?:D You will be happy, if you make a little bit less.Quote:
Originally Posted by hipro5
@noxon: tried it, but board didn't start any more, maybe made some thing worng, soldered the resistor back
@BLCK: not maxed out, testing GFX...
max bclk for me is 230...me participating in SEA region though........
3D or 2D?Quote:
Originally Posted by hipro5
If I remember right, all of them.... :(Quote:
Originally Posted by massman
For 2D, you can always switch to QPI slow-mode. Remember, though, the QPI link is so heavily hurt by this, high performance 3D is virtually impossible.
I can reach 220 in 3D whith full QPI link speed but in 2D only 222, i still find where was been problem (between keyboard and chair :rofl:)
Is there anyone who has the 24x multiplier working? Or is it so heavily bugged that nobody can use it?
I really hope that someone figures out the pll-issues with even multipliers ... would help out A LOT of people
I hope the next competition I compete in is without 32m. Testing 32m for tweaks takes forever and ever and I don't know what to do in the mean time. :(
Hehe, i have never used much time on 32m tweaking, hate long benches.. -Not so long anymore with i7, but still zzZzzzz :DQuote:
Originally Posted by Wava