QuadGT Arrived (56k warning)

Printable View

Show 100 post(s) from this thread on one page

03-16-2007, 01:55 PM
stormcloud

I want one:DD
03-16-2007, 01:57 PM
Blacklash

Honestly, it is a very attractive mobo.
03-16-2007, 02:47 PM
ziddey

Quote:

Originally Posted by Slovak

Since I dislike Richh and he dislikes me I think I'll hold off on that one because he'd probably send me some bios that would hose my board.

lol
03-17-2007, 05:48 AM
nibble

You guys think this board is worth it for an E6600?
03-17-2007, 08:33 AM
Ace-a-Rue

Quote:

Originally Posted by BailA

Hello,sorry for my bad english.On Abit forum discuss on new bios 1.1 06R but the download is not public.Yuo know a link for download? :stick: :)
Bye

here it is: http://www.abit-usa.com/betabios/AB9..._BIOS_0119.zip
03-17-2007, 08:45 AM
Nelly

Quote:

Originally Posted by Ace-a-Rue

here it is: http://www.abit-usa.com/betabios/AB9..._BIOS_0119.zip

Just for info purposes - that is NOT the latest bios available for the Abit AB9 QuadGT, the one you linked above was as far as Im aware the 1st beta bios release from Abit i.e Beta BIOS M621E_11.B02

Quote:

Originally Posted by Nelly

AB9 QuadGT:
Beta BIOS M621E_11.B02:
1. Correct SPDIF phohe jack to meet Reltek Utility
2. Support 50 ohm ODT
3. Fixing CMOS Checksum error/CPU change message show at the same time.
4. Fixing to adjust CPU VTT 1.2V, MCH 1.25V, ICH 1.05V, ICHIO 1.5V, voltage high limit issue
5. Fixing EM64T string was covered while Clear CMOS
6. Adjust E-SATA signal
7. Fixing BIOS option "Resume by Alarm" to "Wake Up by Alarm"
8. Fixing can't boot from floppy, when I set SATA to RAID/AHCI mode and with the PATA HDD
9. The CPU Core Voltage highest limit is 1.9V
10. Fixing can't boot from SATA HDD, when I install bootable USB device

AB9 QuadGT:
Beta BIOS M621E_11.B06
1. Quad Core and Vista64 Exits resolved.
2. RAID/IDE resulting almost resolved, Intel ICH8R + RAID mode with Intel ICH8R + drive SATA
optical is the only resulting not resolved now.
3. Use At your own risk, No technical support for it.

DISCLAIMER:
Universal abit will not be held responsible or liable for any damage made with using a BETA BIOS.
Please proceed with discretion and do not attempt to use unless you know what you are doing!
03-17-2007, 08:46 AM
situman

whats different about the modded bios?
03-17-2007, 09:19 AM
sc00p

Sorry of being too lazy_ass myself (to use search) but can someone tell is this a Dolby Digital mobo... enable to give out DD pcm stream out from s/pdif...?
03-17-2007, 04:36 PM
johnrr6

B06r

I tested RichH's modded Bios.

So did Gary/bingo13----and some others

Totally fixed the "Multi stuck at 6x in Vista" problem I was having. Fan and Power Management stuff seems very solid.

No losing the NIC and my IDE Optical funtions perfectly with a 4-disk RAID-5 array.

No downsides that I could find at all----very solid....

You can go over to the Abit forum and PM him for a copy if you desire----he just started sending it out to interested people.

May be the best BIOS we are going to see for a while....

Your call----I liked them and am using them.

Same caveats hold true as always with Beta Bios------Rich is not responsible if your machine decides to act like an Iraqi Tank-----try at your own risk.

But I've used them for several days and they seem very SOLID!

John
03-17-2007, 05:34 PM
situman

did it improve your overclock?
03-17-2007, 06:56 PM
Sgtkodiak

First off I just want to thank everyone on the forums. I have learned alot but still quite wet around the ears. I have been experimenting with my new system and from what I have read 1T was difficult for everyone on this board (quad GT).

This is not orthos stable but I don't want to up my NB over 1.5 till I get a cooler. Windows stable since I am posting here on it.

I am fully air cooled btw. I have got full orthos blend stability at 3.4 @ 1.46 vcore which seems to droop down to 1.41 under full load.

I am still on the shipped bios. Super PI scores seem lower then I would think, but I think I have good Sandra bandwith. Will post more.

Hope we all continue to work with this board and get the most out of it!

http://i167.photobucket.com/albums/u...ak/3600_1T.jpg
03-17-2007, 06:57 PM
johnrr6

Well Yes

Quote:

Originally Posted by situman

did it improve your overclock?

I am gradually increasing my overclock...

So I have not hit a wall yet with any of the Bios...

But this one stopped the "Multi locked at 6x with Vista" problem----so in that sense the performance jump was big

And his Fan Management stuff works quite well.....my system is remarkably quiet at idle....
03-17-2007, 07:58 PM
Sgtkodiak

More 1T

http://i167.photobucket.com/albums/u...0_1Tmore-1.jpg
03-17-2007, 08:41 PM
Ajfina

would like to test those beta bios by richhs, wondering if is helping memory overclocking , can some one please post trichhs bios so we can get it?
03-17-2007, 09:25 PM
MADMAX22

I would appreciate it if someone would post the bios since i cant log onto the forums and hence cant email anyone to get it, i would only like it if it helps with ram stability above certain fsb or ram speed combos as i dont have any problems like the 6x multi or raid issue since i dont have raid running

thanks
03-17-2007, 10:52 PM
momomo6789

just go on abits forum just got it from him 5.5.5. 490 t1 ftw cant bench it or anything but it booted my commando took my cellshocks with it =/ also richh was just on didnt have to wait a min :)
03-18-2007, 06:09 AM
Ace-a-Rue

Quote:

Originally Posted by Nelly

Just for info purposes - that is NOT the latest bios available for the Abit AB9 QuadGT, the one you linked above was as far as Im aware the 1st beta bios release from Abit i.e Beta BIOS M621E_11.B02

i appreciate you correcting me but if you know about the changes why don't you post the link for the download...that would be more helpful.
03-18-2007, 10:06 AM
Nelly

Quote:

Originally Posted by Ace-a-Rue

i appreciate you correcting me but if you know about the changes why don't you post the link for the download...that would be more helpful.

Yeah sure no problem Latest Beta 06:- http://www.tnplanet.com/abit/M621E_11A.rar

Quote:

Originally Posted by Nelly

AB9 QuadGT:
Beta BIOS M621E_11.B06
1. Quad Core and Vista64 Exits resolved.
2. RAID/IDE resulting almost resolved, Intel ICH8R + RAID mode with Intel ICH8R + drive SATA
optical is the only resulting not resolved now.
3. Use At your own risk, No technical support for it.

DISCLAIMER:
Universal abit will not be held responsible or liable for any damage made with using a BETA BIOS.
Please proceed with discretion and do not attempt to use unless you know what you are doing!
03-18-2007, 01:13 PM
Revv23

Quote:

Originally Posted by Sgtkodiak

More 1T

[

Wow awesome what is your ram voltage?
03-18-2007, 04:42 PM
Chosen.

Quote:

Originally Posted by RLM

Edit: Seems this issue is similar to the posts above. Checking with RM clock my multiplier is set to 6 on two of the cores. Checking in sandra it says that thermal throttling is enabled.

I know this has been posted before, but haven't a clue where.

Have my QX6700 installed.

Running 11x300. all features disabled except Ex Bit.

Ran the modded prime and noticed that 2 of the cores had hit test 6, where as the other 2 were still on test 3.

Then ran cpu-z with the -core parameter, and it seems two of my cores aren't overclocking.

Can't remember, but was there a solution to this problem. Is it the fact I am using an 11 multiplier?

I believe I am running the latest beta bios. Have USB, raid and ide all working as they should.

Thanks for any help.

RLM

It's an Abit feature :stick:
03-19-2007, 05:46 PM
426hemi

Quote:

Originally Posted by Blacklash

Honestly, it is a very attractive mobo.

so is your avatar, lol:p:
03-19-2007, 08:17 PM
Heidfirst

Quote:

Originally Posted by Chosen.

It's an Abit feature :stick:

the B06 "R" BIOS seems to have resolved it :)
03-19-2007, 10:40 PM
RLM

You beat me to it Heidfirst. Yes it has:)

RLM
03-20-2007, 02:21 AM
ChuckM

$30.00 rebate at Newegg. Makes it real hard for fella waitin' on DFI.:dammit:
03-20-2007, 06:10 AM
Author_25

I am making my first move into dual core. At present I am still using a socket 478 CPU and board. I have been putting careful thought into what motherboard to buy, 975x, P965 or 680i. I have been reading this thread and the one on the Abit IN9 32X-Max and given the problems with the 680i chipset I have decided to go with the AB9 QuadGT. I just wished to check to see if the following components are OK.

I will be water cooling and will use a D-Teck Fuzion, Swiftech MCW30 for the northbridge, DangerDen 8800 GTX Block, Swiftech Micro-Res, Stealth GTS 240 and a 120 radiator and a Swiftech MCP655 Pump with 1/2" tygon tubing.

Intel E6600, 2Gb Patriot DDR2 PC2-6400 800MHz CL4 Extreme, Abit AB9 QuadGT, 500GB Seagate HDD, BFG 8800GTX, Creative X-Fi Music sound card, Enermaxy Infinity 720w PSU and a Silverstone TJ09 case.

Thanks. :toast:

Show 100 post(s) from this thread on one page