I am and it's running fine
Quote:
Originally Posted by importpsycho
I am and it's running fine
Quote:
Originally Posted by importpsycho
somobody can "translate" DS3 bios memory setting for language of memset965 ?? :) i cant recognize what is what .... :/
photos results of DDR2 800 with P5W DH Deluxe please
How about this?
http://mysite.verizon.net/restflyg/s.../untitled3.jpg
thats pretty nuts... more info tho pls.Quote:
Originally Posted by Gautam
Vdimm, mobo (Strap if applicable), CPU?
thanks and nice work
Presler 920, 2.4v, P5W DH, 1.65v VMCH, pretty basic. It's nothing special really I don't think, I bought two sets, and all four sticks came within 2MHz of one another or so. Very solid clocking ram for sure.
should I use 2 x spi32 or 1 spi32 at once ? i saw few screens with double spi running
two loads more but gives worse times, due to cache sharing an stuff. So that is your decision :)Quote:
Originally Posted by logigamer
hi; i dno if this has been answered before but where do you get these? (american retailers preferably)
can't find them at newegg or tigerdirect :S
http://www.tankguys.biz/team.phpQuote:
Originally Posted by havoxz
There are other online retailers but this is the place where I bought mine.
cheers! im sure there are quite a few retailers but the thing is im in australia so i dont know anything about american retailers; especially those that retail these particular set ! ;pQuote:
Originally Posted by UZ7
No problem here , it boots with only 1.8v. ( celeron cpu atm , waiting 4 my E6700 )Quote:
Originally Posted by importpsycho
SPD is programmed so it boots on any mainboard.
But even if you manually set it on 669MHz 3-3-3-4 it's able to boot with only 1.8v.
http://www.nintek.com.au/x/scripts/p...dcategory=1283Quote:
Originally Posted by havoxz
Too bad, all my conroe boards died in these 2 days consecutively,
I will have 800 and 1000 announce soon
well yes, ask Jason(mickeymouse, he truely did 1.9v ddr800 3-3-3-4 dual spi 8m completed passed.;)
http://www.ocxtreme.org/onepagebook/ja.jpg
How are the 667 3-3-3-8 doing on Asus P5B deluxe boards. I haven't seen any results on that board.
everyone is showing off their Core2+Team combo
time for some little AM2+TeamDDR2 action
cpu : Orleans 3000+
m.b : Biostar Tforce 550
ram : 2x512MB Team Xtreem DDRII 667 3-3-3-8
SuperPi 32M - PASS
Vdimm : 2.1v (BIOS max)
http://img137.imageshack.us/img137/3892/32m21vgj7.jpg
Currently limited by processor as I don't want to push more cpu voltage on the stock cooling. Besides, the Tforce mobo does not support DDR800 divider, yet. Still waiting for my DFI Infinity to arrive.
Anyway I did some minor Vdimm mod (pencil trick) to my mobo, multimeter reading shows 2.41v. Will try on how tight it will go at the same speed.
can anybody give me any tips on how to get a Gigabyte DS3 to even post with a DDR667 3-3-3-8 2GB kit?
as the board powers up, the fans spin and then there's a long beeeep.
after that it reboots and does the same thing over and over.
i've tried plugging in a 512mb stick of kingston and setting the frequency, timings and voltage to the rated values, but when i swap the memory for the teamgroup, it won't post and just beeeeeps at me :(
[edit] the Gigabyte DS3 is running on the F4 BIOS at the moment
Mine booted with a Celeron and the DDR667 Kit with BIOS F2 with no problems... Running F4 fine now.Quote:
Originally Posted by Pyr0
One question... Should I worry about the SPD info listed in cpu-z? My DDR667 3-3-3-8 kit has different info for each stick:
http://img243.imageshack.us/img243/1953/teamspdxl9.jpg
Should I care about this at all? Can't really test the OC or anything because I'm still running a Celeron. This is on a DS3 btw.
i think it's better to RMA it since the pair are meant to be identical when it's really not
but i wouldn't really bother if both are running fine
this memory love my P5B DX
2.2v
http://simon.webideal.ca/Bench/team%201050.JPG
Yup i believe i have some dead sticks :(Quote:
Originally Posted by darkandlong
they were bought brand new but so far i have been unable to use them at all
i've tried them in a Gigabyte GA965P-DS3 and an Intel D975XBX "bad axe" and neither board will post with the Teamgroup memory plugged in :confused: :( :slapass:
gutted.... i was really looking foward to playing with these, guess i'll have to wait another couple of weeks until i get a replacement (working) pair :(
Quote:
Originally Posted by fakhrain
that's quite impressive;)