Quote:
Originally Posted by dinos22
I have the same time @2976mhz with TCCD under 300mhz... With BH i'll be under 27 for sure... :toast:
http://img29.imageshack.us/img29/2619/2745s1mp.th.jpg
Printable View
Quote:
Originally Posted by dinos22
I have the same time @2976mhz with TCCD under 300mhz... With BH i'll be under 27 for sure... :toast:
http://img29.imageshack.us/img29/2619/2745s1mp.th.jpg
Wow man, I'm definetly selling my CABYE 148 on ebay after seeing that. Starting price? $350 I thinkQuote:
Originally Posted by lilkevin715
Bought from 0 feedback seller too :lol:
Seller with 0.0 feedback no less.Quote:
Originally Posted by lilkevin715
Maybe that is what I need http://www.cons.org/smileys/scratch-head.gif
hey guys :)
i´ll get 3 146 0540 fpbw soon :D
are the temps with HS @ 0540s good or not?
easier said that done ;)Quote:
Originally Posted by ^don.k's^
s7 is pretty experienced....he can't get it over the line....you'd think he'd be able to do it with ease especially considering alpha's time at 2.9GHz
Far from proof of stability, but some quick early shots below. Temps at around 43C (under load, obviously). IHS still on; didn't take it off immediately in case I wanted to sell it. Not sure that's going to be an issue anymore!
http://img353.imageshack.us/img353/9...arly2859nz.png
Update - 32 minutes now, through 8K test. Probably crank it up some more in another half hour.
Quote:
Originally Posted by dinos22
Come on dinos22, it was 2.99. :slap: Pretty soon your going to have him down to 2.8. :stick:
Do you really think that 10MHz is going to get the guy .400+ second. If it does he will be the greatest oc'er of all time?
i need glasses......i thought it said 2898MHz = 2.9GHz (i mixed up my 8s and 9s there heheheh)..........now that i looked at it again.....nothing special really heheheQuote:
Originally Posted by dogsx2
definately no way alpha's breaking the 27s barrier....soz guys
Two observations about my 175. First, it is very sensitive to memory timings. Deviating from the optimized settings (704-2BT) cost me about an hour and a half tonight before I finally realized the problem and went back. Back on track now. Second, it does not appear to be handling high temperature well, frequently freezing up while priming when temps approach 55C. This may, however, be a result of poor scaling with voltage. Looks like the IHS is coming of tomorrow (purely in the name of science, of course). I'm going to prime 2900 overnight at atound 1.4 volts overnight. More news tomorrow.
Nice clocks xxmartin for an 165 DC Opteron.You´ve got 5,5Gig on the Board running. That´s incredible. Nice Job.Quote:
Originally Posted by xxmartin
HeHe yer no way on earth until I can add a few more MHz :DQuote:
Originally Posted by dinos22
I actually had a slightly better score @ 2989 but did'nt save it :rolleyes:
Anyways for a cabbage I am more than happy with 2.8Gig with low Vcore :)
http://i16.photobucket.com/albums/b2...ne/32M2800.jpg
Ram not optimised in this shot
Got my 144 CAB2E priming @ 2800mhz/1.472v today - I might push further over the weekend, but I'm quite pleased with it so far (44c under load, idles 29c and the mobo reports 30c!).
I get the feeling that the voltage requirement will scale up quickly past this point, but its almost the weekend so more time to play with settings :banana:
I got my Opteron 146 last night with CABYE 0536 GPMW ...
I OC with rig like in my sig but i never pas 273 x 10 in 166 divider :( although i make the vcore to 1.6 V..i think there is no problem with the bh5 cause in divider 166 the memory run about 229 while HTT at 270...
so i think the problem is my Opteron Steping or PSU ..cause my PSU 3.3 rail is 3.24 when idle and 3.23 when load....
is My PSU limit My OC or i got bad Steping ?
this a sreenshot at 271x10 Vcore 1.6 ,if i run super Pi 1Mb at 273 x 10 the system always restart :(
<img src="http://img317.imageshack.us/img317/7067/vcore160cu.jpg" alt="Image Hosted by ImageShack.us" />
Thanks. Those 165 Opterons are really a nice bang for the buck.Quote:
Originally Posted by Rufus7
Wow, thats amazing if it would be water-cooling!Quote:
Originally Posted by ixtapalapaquetl
:banana:
well, i ordered 3 Opteron 144's at a local shop yesterday, and got them in this morning! I was suprised to find that all 3 were CABNE 0540 BPMW. They should OC very well.
I was dissapointed after i installed the first CPU in my system and fired up Super PI @ 2400 MHz @ 1.344v. I got an instant error after 5 seconds (...NOT CONVERGENT IN SQR05...)
i'm still using the 310P bios for my DFI NF4 SLI-DR. This CPU has to go much higher. What is holding me back?
tnx!
hey these 0540 CABYE's hoot. This one is on standard BT, using vvx limited to 3.2vdimm till next week. :slap:
[IMG]http://img478.imageshack.us/img478/4...152v32m6cy.jpg[/IMG]
Memory timings are the key to any 64 oc.Quote:
Originally Posted by SPivX
i know, but i set the memory on a 1/2 divider to ensure that memory is not a limiting factor. it has to be the CPU or HTT, but i set HTT multi to 3x already. strange.... would a BIOS updgrade (704-2BTA for instance) do any good?
More VcoreQuote:
Originally Posted by SPivX
Looks like we're good at 2.9GHz on air. I'm going to keep priming until I get home from work - little burn in can't hurt.
http://img133.imageshack.us/img133/9...early299wq.png
Here's my memory settings:
http://img133.imageshack.us/img133/8...arlya644pq.png
When I get home this evening, I'll let you know if it primed through the day, then I'll pop the IHS and shoot for 3000+. In the meantime, let me know if you guys want me to try anything else. My students have a Calculus Midterm next week, so I imagine I'm going to have to stay kind of late tutoring... I'll get back to you as soon as I can.
Very nice, I think thats my next chip right there.
Hey!
When do you folks think the 146 CAB2E will be available? It it even will be available?
Cheers!
Don't forget the memory controller is on-die.Quote:
Originally Posted by SPivX
I had to use a 120 divider on my DFI Ultra D (now using 623-3 BIOS) to get the CPU to max.
There's also a sweet spot for voltage on the 90nm process, at least there is on water anyway. 1.45 x 110% is for me. If I go higher, it actually hurts the system, rather than allowing a higher overclock.
I went from 270*9 NOT stable to 300*9 stable just by flashing from 510-2 to 510-2FIX.
So BIOS plays a role.
They are floatin around as we speak.......atleast over here in the US, I know of one person who just got one in from zipzoomfly.com and I think tankguys just got a shipment inQuote:
Originally Posted by Razor_cut
Cabne 0540 Bpmw
Ok?*
Update on my 150 CABNE
I got the memory bug worked out with timings, and bios change, and I was able to get running dual channel finally. The HTT on the board is my limiting factor right now.
Here is a quick screen shot taken last night after a few hours of WoW and BF2. The 3dmark was taken at stock speeds (450/1200). It is running prime today while I am at work. I had to push the memory from 2.9v to 3.2v to hold those timings. What is the safe voltage limit on that ram? (OCZ Gold EL 2-2-2-5), I raised to voltage to 1.7 in an attempt to get it stable at 3.5, but it made no diffrence. My HTT just gets unstable, even with the CPU turned down to 1200mhz.
http://www.gadtek.com/150-3.jpg
Providing you use active cooling 3.5v - 3.6v should be ok for 24/7Quote:
Originally Posted by Gadflyii
Nice OC there dude. :toast:
edit:- btw try TWTR 1, TRFC 14 and TRC 7 to get the more speed out of it.
wow that high!
Yup, winbond loves volts, I don't think I've ever run mine below 3.4v :D
Think it is possible to run it 1:1 @284mhz? @3.4v? I have a big case fan blowing directly on the memory, is that suffeciant cooling?
Extremely highly unlikely even with the most cherry picked sticks ever. At 3.4 you will probably see 250-260 ish. This thread has loads of info on Winbond based RAM, get reading my friend :DQuote:
Originally Posted by Gadflyii
edit:- You may want to play around with different multis and dividers to get the ram to it's optimal speed.
Hi!
I see that some stores is operating with two different names on theese opterons.
1.Opteron UP "San Diego"
2.Opteron "Venus"
Does this make sence? Can it really be San Diego cores in some of them? :confused:
And, do you know any stores which is shiping to Norway? I want a nice Opteron! :stick:
They which can be bought today, how do they clock? Any gold chips? (steppings?) I already have a Venice which is doing SuperPi 1M at 3150mhz cooled by single phase change. What can i expect with an Opteron?
Is anyone using PowerNow with their S939 Opterons?
I'm getting mine next week, finally moving away from Intel, and I thought PowerNow on an OC'ed Opteron would be a great thing..
I leave my PC running 24/7, and there's really no need for it to be running full voltage and full clock if it's just downloading some stuff off the web or checking emails.
I've read on DFI's site that you shouldn't use Cool'n'quiet if you're overclocking, which raised my concerns about PowerNow..
Can this be done?
I thought it only dropped the multiplier (voltage too?).
Can the levels be set?
I'll have a mCubed tbalancer in the box, and it would be really cool to drop all the fans to zero or very very low and have the CPU running at a low clock and low voltage until it's needed to do some actual work (like games or video of course!)
well, i've tested 1 of 3 Opteron 144's (CABNE 0540BPMW). But man, this thing sucks! I'm currently @ 2520 @ 1.5v. I set the RAM divider to 1/2 and the LDT multi to 3x, so it has to be the CPU. Look at the screenie, this HAS to be the worst clocking Opteron 144 on the planet!
http://80.61.226.251/~sp/superpi/superpi_2520.JPG
what am i going to do? please help a newbie! thank you very much! :confused:
so i should avoid 0540 CABNE BPMW
please look at this thread on DFI Street:
http://www.dfi-street.com/forum/showthread.php?t=26642
i found out that the 0540 CABNE BPMW is not the best Opteron 144. In fact, i think it's the worst out there and i'm gonna return it to the shop i bought it from.
Indeed, these opterons are HOT. My NE 0540 APMW is 46ºC loaded under 1.6 bios set (smart guardian shows 1.56V) and a tripple ice pro with an asetek antarctica.
Bloody hot...
Results:
CABNE 0540 APMW
133785AJ
batch # 700's
Default Vcore
2700mhz 300*9 ram at 133 divider
SP2004 stable
SP32M stable
1.55*1.04 shows as 1.56Vcore
2806mhz 302*9 ram 133 divider
SP2004 stable
SP32M stable
havent tried more, but obviously not the best of CPUs. Getting a 146 from our belgian friend I think, and a mousepot as soon as the next batch is made. Considering my batch number is high 700s I think the results are ok.
What I find interesting, is that I cannot boot up into windows under a variety of settings, but when I clock through Clockgen it's easily stable :confused: 2806mhz is as stable as it can get, but 2826mhz with same settings and only slightly higher FSB results in BSODS... Interesting CPU...
Needs a lot more testing, curerntly adjusting eva2000's OCZ VX timings he used in his San Diego thread :toast:
Just got my Opt 146 retail box from Monarch today. Haven't really had much time to fully test it, but it's looking promising so far. It passed superpi 1M and 8M. I still have to prime it to see if it's stable. Keep in mind that I have had winchesters, venices and others that I have never been able to even boot at these speeds. So for me this is a major leap. :)
http://www.madmikess.com/stuff/opter...0x10-1.55v.jpg
http://www.madmikess.com/stuff/opter...46stepping.jpg
It's a start...
I actually lucked out on this one. They are selling for $199 at Monarch now, when I bought it on Monday I managed to get it at $181 plus shipping.
I just ran SuperPi 32M and passed:
http://www.madmikess.com/stuff/opter...superpi32m.jpg
Will be running prime later.
i can get a 148 with the following code:
osa148DAA5bn
cabye 0536gpmw
1304597150259
is this one worth trying? and is the 148 worth the extra bucks over the 146?
MadMikeSS:
How come you run TRC at 7? I did a comparison between TRC at 11 and 22, and found no difference whatsoever. Does having it less than 11 help a lot?
Cheers,
Suman
It's not the worse for sure, mine is running at 3ghz+ stable.Quote:
Originally Posted by SPivX
Coolling? volt?Quote:
Originally Posted by Nano2k
Where did you ge it and when?
Honestly, I have my memory running at optimized defaults. For 704 bios that's what trc is. I'll tweak with memory timings later. Right now I am just messing with defaults.Quote:
Originally Posted by sumang007
i can get 1 with same stepping , are they good ???Quote:
Originally Posted by SPivX
They are pretty good, 3ghz at 1.65vcore. But if I were you I would get a CABYE 0540 instead.Quote:
Originally Posted by mascaras
Holy s***! That's the by far best Dual-Core I have ever seen! So far, no Dual-Core ever went on water lower than 1.6V @ 2900 MHz! :banana:Quote:
Originally Posted by ixtapalapaquetl
And you are doing 2.9 GHz @ 1.44V on air! Go for the 3 GHz with that hot baby. That's and absolutely outstanding chip you've got there.
:woot:
Watercooling, IHS removed and 1.648VQuote:
Originally Posted by ManagHead
From Computermsa.
MadMikeSS did you get that stepping by chance, or you asked for it? Did they tell you? WHen did you order that chip?
I'm going to remove the IHS, 52ºC loaded temps on an asetek block are too much.
CABNE 0540 APMW
stable at 2900mhz @ 1.67Vcore, 1.71 BIOS set.
2950mhz runs SP32M fine, then suddenly BSODS. Something tells me the RAM plays a greater role with the opterons than with the Venices.
(pictures coming up, a64 rig not hooked up)
I ordered it Monday when the price was $181. I took my chances and this is what I got. They never told me what I was getting, I found out when I opened the box today when it arrived. :)Quote:
Originally Posted by NYCTeeN82
MadMikeSS what BIOS are you using? :stick:
704-2BTAQuote:
Originally Posted by matt1
Man these CABNE keeps getting better..
Guess Its like getting a fx but cheaper and up locked multi's..
Guess I'll have sell mine soon as I keep buying R/C parts :( Just got a Traxxas Tmaxx and that things a blast but a money pit :(
I seriously thought that the very early cabne week 30's would be the only ones that clocked as well as they did. Now that more and more steppings are doing super, it just seems that amd has stepped up their quality all of a sudden. On some of the other threads, it seems that even the san diego's seem to be doing much better lately.
Way to go AMD...Keep it up! Givin' the broke man a chance at an FX 59!
Looks like I have pretty much found the max of this chip. 11x260 2.85ghz 24+hr prime stable 1.3x113% vcore, 11x267 2.93ghz 32m pi stable 1.425x113% vcore, 11x278 3.05ghz 1m pi stable 1.425x113% vcore. Best suicide shot 11x282 in avatar, same vcore. Went as high as 1.35x123%, couldn't get any higher. This chip runs hotter than my 3500, even with less voltage, but I haven't taken off the ihs, and I have removed it on the 3500. I guess that will be the next thing to do and see if I might be able to sqeeze a little more out of it. I have posted prime and 32m screenes earlier in thread. Here is my best 1m pass.
probably trying to nail down more market share and beat Intel to Xmas sales :)Quote:
Originally Posted by fullup3
Some updates and general information about my new 175 (stepping, cooling in sig):Quote:
Originally Posted by xxmartin
1) Primed at least 8 hours at settings in previous screen shots (2.9GHz, 1.44V) before leaving for work. Came home 11 hours later and found that Windows had crashed/rebooted. So I suppose it's prime stable for somwhere between 8 and 19 hours; I'm comfortable with anything in this range. It was a warm day in NYC and the heat was on in my apartment, so ambient temps didn't help matters. I suppose I should be more than pleased at the prospect of running 2.9GHz at 1.44V 24/7, but to be honest I was really hoping for a bit more. Avarice is the right word, isn't it? Or is hubris better?
2) Removing the IHS brought about a mere 5C drop in load temps, a far smaller improvement than with my CABNE (roughly 10C). This was a bit of a disappointment, and potentially important information for others with similar weeks/steppings. Removing the IHS may not be the no-brainer it is with single core Opterons, but this fact obviously needs to be confirmed by other users. Hell, you know you're going to do it anyways.
3) Temperature continues to seem to be the ultimate constraint in my overclock, which may be good news for non-air users. Sustained readings of around 54C and above causes Windows to lock up (and occasionally to crash) while priming, both with and without IHS. (As an aside, I probably should seriously consider reinstallation at this point given the number of hard resets I have had while testing over the last two days. It is conceivable that some of my recent instability is due to OS corruption.)
3) In effort to moderate temperature, I threw on a torturously loud Vantec Tornado on my XP-90. This helped bring temps down another few degrees, thereby allowing more overhead for voltage. It is also driving me insane.
4) All this in place, I was able to boot successfully to Windows at 300x10 at just under 1.5 volts. Fought several hours to achieve prime stability. Unfortunately I repeatedly failed prime blend test after 1-4 minutes during the 1st 1024 FFT run. Increasing voltage did not help. In retrospect, it was stupid of me to have been trying to fight large FFT failures with Vcore - large FFT's work memory, not CPU! Silly rabbit.
Back on track, I then tried a few other sticks of RAM with the same results. After lots of futile experimentation with timings, I finally tried lowering MAL/Read Peamble to 8/5.5 from 9/6. This immediately brought stability to the large FFT tests. Again, I was stupid - this should have been the first thing I tried knowing that Opterons are sensitive to these settings. Large FFT's are now a breeze, even at low voltage. Incidentally, my single core CABNE likes those values too, which got me thinking...
5) Ran prime blend again, passed 1024K test. Moments later, however, I failed the 1st 8K test, indicating that though RAM was now OK, CPU was not. Loosened ram further just to be safe, then incrementally raised volts in attempt to pass small FFT's. Pushed up as high as 1.65V. However, despite increased Vcore, once I went beyond around 1.58V, Windows would consistently freeze during prime as load temps surpassed roughly 53C. 273x11 was no better. This complete instability at any voltage convinced me that temperatures were the dominant variable (I choose not to believe that I have simply found the chip's wall). Also, though one core oftentimes failed before the other, it was inconsistent in doing so, especially as Vcore and timings changed. I take this as a possibly encouraging sign that that core is not just a total lemon since it wasn't always first to drop..
At this point, I gave up on 3GHz on air for the evening. Will give it another go as I learn more; might try that undervolt burn in crap.
I have backed down to 2.95GHz at 1.49V. As a quick test of Vcore, ran small FFT's for 45 minutes without event. Currently priming blend at 42C. Though it has only been like two and a half hours, it looks like it's gonna be fine (certainly so with a little bump if necessary). Might even be able to back her down below 1.49 volts. We'll see.
Final thoughts: this chip reminds me a lot of the early single core CABNE's. It takes off crazy fast out of the gates at near default voltage. Temperature increases outpace voltage increases. It subsequently fails to scale well with voltage as a consequence of this heat. Indeed, in my case, 7% past stock voltage netted a 32% overclock, whereas 20% past stock voltage isn't even stable at a 35% overclock. Methinks it be time to invest in better cooling.
Anybody wanna loan me a prommie? :)
http://img205.imageshack.us/img205/5...9525hrs9ii.png
damn, now I am dying to get a better board, hahaha, I think I'll play with this lame biostar board to see what happens....time to add more to my thread I guess.. excellent data man, uh also, your air temps still seem just a tad hot, try remounting a couple times? I guess it must really be the ambient killing u there.
Well i got my CABYE 0540FPBW a couple days ago and this is what ive gotten it to atm.
http://members.westnet.com.au/danastas/1488v.jpg
This is using a TT golf 325 heatsink.
This is what i am running atm and is what i game at/ surf net everything at and to me its stable.
StressCPU gives up after a few hundred thousand iterations when the temps get up above 61degrees. At 1.54v it is stable untill temps reach 63-64.
The annoying thing with this chip is i cant get it to clock much higher. Above 3100 it wont stresscpu or superpi 32m for longer then a minute no matter how many volts i put into it.
Ive decided to be happy with 3ghz (hell thats higher then my original aims anyway) and will leave it at that untill i get watercooling in a couple of weeks.
Hey ixtapalapaquetl would it be possiable to find out what MaxTcase and thermal offset youre opterons have?
146 CABYE 0540 FMBW under Watercooling HIS on.
Ambiant Temp ~ 21°
http://users.skynet.be/pt1t/146/146_3001_1.40v_occt.PNG
This is just insane man 1.4V for 3000mhz :toast: awesome chip m8.
I hope mine will clock that good :slobber:
Sharky I hope we will get as good chip as Pt1t`s!... ;)Quote:
Originally Posted by Shark-357
Pt1t awsome chip :slobber: :slobber: :slobber:...how high can it get with higher VCORE?...Show as some Super_PI 1m score :toast:
Regards,
Primoz
1.5v --> 3.1ghzQuote:
Originally Posted by Primoz78
1.62v --> 3.2ghz but occt not yet passed :D crashed after 60%
i need to put some ice in my watercooling.
http://users.skynet.be/pt1t/146/CPUMARK_423.PNG
http://valid.x86-secret.com/show_oc.php?id=47866 @ 1.62v
148 boxed
cabye 0536 gpmw
148 tray
cabye 0535 xpmw
146 boxed
cabge 0536 vpmw
146 tray
cabge 0536 vpmw
144 boxed
cabye 0536 gpmw
144 tray
cabne 0540 bpmw
which one to pick ?
148 out of question cause too expensive.
144 boxedQuote:
Originally Posted by TEDY
cabye 0536 gpmw
sems :D :Quote:
Originally Posted by Tamille
144 boxed
cabye 0536 gpmw
ok then :)
they have weird prices
Opteron (Sockel 939) | Original
AMD Opteron 144 | Socket 939 | 1800 MHz | 1MB L2-cache | boxed
Athlon Opteron 144
OSA144BNBOX
149,00 €
*NEU* AMD Opteron 144 | Socket 939 | 1800 MHz | 1MB L2-cache | tray
Athlon Opteron 144
OSA144DAA5BN
139,90 €
*NEU* AMD Opteron 146 | Socket 939 | 2000 MHz | 1MB L2-cache | boxed
Athlon Opteron 146
OSA146BNBOX
143,00 €
AMD Opteron 146 | Socket 939 | 2000 MHz | 1MB L2-cache | tray
Athlon Opteron 146
OSA146DAA5BN
140,00 €
AMD Opteron 148 | Socket 939 | 2200 MHz | 1MB L2-cache | boxed
Athlon Opteron 148
OSA148BNBOX
248,00 €
*NEU* AMD Opteron 148 | Socket 939 | 2200 MHz | 1MB L2-cache | tray
Athlon Opteron 148
OSA148DAA5BN
249,00 €
what about 146 seems cheaper but CABGE's ?
Cabge are not so good clockers in general 2.7-2.8 max
So far, This dual core opteron 165 is 100% stable at 2.7ghz @ 1.52V, the 2nd core seems to go down with anything over that... I can boot into windows and prime one of the cores at 2.8ghz though.. ah well, 2.7 isn't that bad :)
i need some help... with my venice my bh5 ran every divider up to max... now with opteroon div 150 dont work.. mem is @230 and i get erros :P but cpu is normal or bad... 1,55v 41 full load 2,85 ghz OCCT stable , IHS on
edit i have 0536 cabye
anyone what read preamble and max async should i use ?
i have 2x256mb corsair rev1,1 bh5 , with venice 3,6v @275 mhz
704-bta bios
I have 3 chips to test: an E6 stepping Venice 3000 and 2 Opteron 144s. The first of the Opterons is a CABNE 0540 BPMW from overclockers (co.uk) - their current stock, still waiting for the other from elsewhere.
In the absence of the DFI Expert board, I'm getting a cheapo ASRock Dual mobo on Tuesday and 2Gb Ballistix to test with the stock cooler. If there's a lucky winner, it'll go under a Vapo LS.
My attitude is that if they only do 1.8 GHz stock, I have no reason to whine - they're doing what it says on the tin. I think ppl tend to forget that sometimes. If it only does 1.7 GHz, then it's an RMA.
146 CABNE 0430 is unbeatable. :banana:
Here's 3050Mhz 1.4V watercooled ambient ~19C Heatspreader still in place.
http://img.photobucket.com/albums/v6...CT3050MHz1.jpg
Quote:
Originally Posted by Nano2k
hahahah my cabge hit 3g easily with air :)
He said in geenral... yours must have been a nice chip. :)
Anyway I have a 146 CABYE @ 3ghz now stable... loving it to bits. :slobber:
Super PI time seems a tad high though at 29 secs lol... but PI loves 1:1 doesn't it?
3 ghz 1,6v 44*c full load
0536 cabye 144 opty
waterchill h2o
Thats why I said "in general" :toast:Quote:
Originally Posted by KeZzZu
My results :) Will try higher later on :)
http://img120.imageshack.us/img120/1...oldude25ys.jpg
[Ignore the PSU Rails, they're false readings]
so CAB2E also not bad at all
nope :) going to see if i can hit 2.9, maybe 3 :D
I am happy as 2.8 was my goal, so if it doesnt do any more i wont be that bothered but ovbiously it'd be great if i can squeeze another 100/200mhz out of it :)
Thx,
cool_dude
Im getting mi opty 146 or 144 in a couple of weeks... to chile only arrived the 150 thats extremly expensive...
If im lucky i wil get a good stepping hoping for a CABNE 0530 or better...
How do you think and opty will run under a Zalman 7000B AlCu?
I'll let you know on Sunday :)Quote:
Originally Posted by DeToNaToR.cl
Suman
Quote:
Originally Posted by Richdog
Low Latency and 1:1 helps Super PI alot. I pulled out a 29sec SPI with my CABYE @ 10x290 3-4-4-8.
My TT BT is on the way, hopefully that will get me to the magic 3ghz. If not as soon as the prommie gets fixed i know it will :D
What type of load temps are you getting with your Hyper 6?
I have the Coolermaster KHC-L91-U1 but won't get my opty until next week or the week after.
thanks
Doing some burn in with Opteron 146 using high vcore as <1.6v vcore temps only max 45-46C on Cosair Hydrocool 200 water, not enough to burn in cpu apparently...
http://fileshosts.com/DFI/NF4_SLI_D/...ad_3040mhz.jpg
Graphs using MBMLog plugin http://i4memory.com/showthread.php?t=1635 :D
Yea, any cpu that can do that is pretty good. :D Ambient 22c with Koolance2 with heatspreader on. ;)Quote:
Originally Posted by Zeus
http://img240.imageshack.us/img240/8352/30312qs.th.jpg
http://img240.imageshack.us/img240/6...occt8ap.th.jpg
Does 30c idle @22 ambient at 1.4v sound about right with a Koolance2? Is there a trick to seating it right? Any advice would be helpful.
what's with the OCCT text font being different ???Quote:
Originally Posted by dogsx2
One says I was almost done, the other says I was done. Didn't cost anymore so I thought I'd show both. :DQuote:
Originally Posted by eva2000
I noticed tht also, is the system missing fonts?Quote:
Originally Posted by eva2000
no i mean font type
http://www.fileshosts.com/DFI/NF4_SL...inished_tn.jpg
Where do you change the font type ?
Quote:
Originally Posted by ixtapalapaquetl
tighter timings brought stability?????
http://users.skynet.be/pt1t/146/146_...55v_occt_b.jpgQuote:
Originally Posted by eva2000
that s right font :D
Do you check the new CPU-Z beta version about Vcore? it seems to be that now shows the real voltage. At least the voltage that you set in Bios.
Quote:
Originally Posted by corvus_corax
Do you have link ?
My bad.Quote:
Originally Posted by Pt1t
Here:
http://forum.x86-secret.com/viewtopic.php?t=4221
thanksQuote:
Originally Posted by corvus_corax