New RAM List!!! (now with 1GB stick listing too)

anyone have some info about these here?

Corsair Twinx1024 3200C2PRO (2x512)
XMS3202 v4.3
0518032-3

thanks

http://www.houseofhelp.com/forums/fo...hp?forumid=128

Follos ReelMonza's link, go to the Enthusiast's Corner, post in the IC Inquiry thread stickied at the top.

That lot # looks familiar though, did you already post there?

yes, i posted there... it's the last post :D
but no answer so far

Check my memories...
http://www.thelab.gr/showthread.php?...1084#post21084
Transcend Value Ram DDR333 (spd : 2.5-3-3-7)
with Winbond BH-6.
They are missing from the list and little know about them.
Bought them in Greece 2 years ago.

My ram seemed to be missing so I'm filling in what I found:

2x 1GB OCZ PC4000 Platinum edition Enhanced Bandwidth, Extended voltage protection, Ultra low noise.

It runs at 3-3-2-8 with Infineon HYB2D512800CE-6 on Brain Power PCB.

Infineon says: HYB25D512800CE-6 / 512Mb,64Mx8, DDR333 2.5-3-3 / PG-TSOPII-66

So it seems to be only 333MHz chips that can do 500MHz.

Here's a nice review: http://www.overclockersonline.com/in...num=321&pnum=0

Quote:

---

Originally Posted by tijgert

My ram seemed to be missing so I'm filling in what I found:

2x 1GB OCZ PC4000 Platinum edition Enhanced Bandwidth, Extended voltage protection, Ultra low noise.

It runs at 3-3-2-8 with Infineon HYB2D512800CE-6 on Brain Power PCB.

Infineon says: HYB25D512800CE-6 / 512Mb,64Mx8, DDR333 2.5-3-3 / PG-TSOPII-66

So it seems to be only 333MHz chips that can do 500MHz.

Here's a nice review: http://www.overclockersonline.com/in...num=321&pnum=0

---

And here http://www.xtremesystems.org/forums/...ad.php?t=82975 a funny story hehehehehe.

Thanks btw! :D

Dudes what chips do adata and geil value crap have?? :p:

sry not 4 me i buy bh 5 two twinmos memory sticks next week :clap:

Anyone any idea what chips lie within LPT ram??
I have two sticks of it one pc3200 and one pc4000,
No system to test in ATM but Im looking for specs on them.
Google throws this back whick is of no use to me at all!!!
http://www.it.com.cn/f/diy/046/30/7038.htm

hi guys

I am new at this forum and i have a question:

which 2gb kit should i buy?

or which chips are on 2gb kits like CORSAIR TWINX2048-3200C2??

thx

ps: :slapass: bad english sry I'm swiss

Quote:

---

Originally Posted by SWISSCLOCKER

hi guys

I am new at this forum and i have a question:

which 2gb kit should i buy?

or which chips are on 2gb kits like CORSAIR TWINX2048-3200C2??

thx

ps: :slapass: bad english sry I'm swiss

---

hi and welcome! :)

imho the best 2gb kit would be OCZ platinum EB pc4000.

as for Corsair, it depends on revision: v1.x is Infineon based, v2.x in Nanya.

OCZ platinum EB pc3200 timings: (LINK)
2.5-3-2-8

Corsair TwinX2048-3200C2 Timings: (LINK)
2-3-3-6 (*2.5-3-3-6 on AthlonXP systems)

Quote:

---

Originally Posted by Wired-HoH

OCZ platinum EB pc3200 timings: (LINK)
2.5-3-2-8

---

whoops, i meant OCZ platinum EB pc4000 2gb kit. link

:slap:

thanks for the heads up wired. :up:

high5:
No problemo.

Swiss: Do you want to overclock at all?

btw Wired, do you know could we expect Corsair to release XMS 3500LL 2GB in a non-Pro edition, w/o those leds?

What chips are used on the Geil Ultra-X nForce4 Edition
http://www.geilusa.com/newsdetail.asp?linenumber=61

(I got a reply that they use the "elpida" chips:confused: :confused: )

Would this ram be any good on a DFI nF4 Ultra-D mobo?
(my CH-5 ram is on the road to oblivion:slapass: :slapass:)

I have a corsair XMS3200C2PT and likely have a SAMSUNG TCCD 516

anyone know about the limits of this RAM?

Quote:

---

Originally Posted by BiKEKiNG

I have a corsair XMS3200C2PT and likely have a SAMSUNG TCCD 516

anyone know about the limits of this RAM?

---

please don't double post.

http://www.houseofhelp.com/v3/showthread.php?t=44365

More likely TCCX.

Quote:

---

Originally Posted by Wired-HoH

Swiss: Do you want to overclock at all?

---

hm... yes:D

Quote:

---

Originally Posted by Wired-HoH

OCZ platinum EB pc4000

---

i think thats a really nice kit, but it is a bit high priced

what about this:
http://www.ocztechnology.com/product...annel_platinum

Just keep in mind that 3200s aren't guaranteed by anyone to do higher than that speed (albeit most will by a little at least), hence why higher speeds are recommended.

FYI, the Corsair equivalent of that memory is the 3200XL series.

Quote:

---

Originally Posted by Wired-HoH

Just keep in mind that 3200s aren't guaranteed by anyone to do higher than that speed (albeit most will by a little at least), hence why higher speeds are recommended.

FYI, the Corsair equivalent of that memory is the 3200XL series.

---

atm I have the corsair twinx 3200xl pro, but i need 2x 1gb :)

can i clock them -> http://www.ocztechnology.com/product...annel_platinum up to DDR500 with high latencies and higher voltage?! impossible?

Maybe. Basically, they rate them @ 400 Mhz. 25% OC may be possible, and everyone can guess what they may do based on ICs, PCBs, etc, but ultimately the best answer is a "maybe".

Finally I am going to try my GeIL Ultra-X TCCD on my new MSI Neo2 Platinum, but ARGH... I already have a problem before mounting it:

http://www.xtremesystems.org/forums/...ewpost&t=84599

:censored: :dammit: :help:

Motherboard also works without I/O shield :banana:;)

hm but DDR450 with Cl 2-3-3-6 should be possible?

(with the OCZ platinum kit, 2x 1GB, DDR400, Cl 2-3-2-5)