Printable View
both sets work pretty much exactly the same. the unmatched pair will run 3d at about 3fps higher.Quote:
Originally Posted by saaya
265 with 3.6v is rock stable
275 with 3.8 should be too.. i dont have prime, or a computer to test right now, as you know exhbach and i just murdered our A64 rigs. :rolleyes:
can't get aida no more.. any ideas on how to get the week with other programs? cpuz spd is empty .. can't find it in everest too..
but doing 260mhz 2-2-2-5 3.3V prime/memtest/games stable.. gonna push it up higher
http://img.photobucket.com/albums/v3...0tight32mb.jpg
http://img.photobucket.com/albums/v3...memtest260.jpg
http://img.photobucket.com/albums/v394/babyelf/pi.jpg
Taking the heatspreaders off isn't an option?Quote:
Originally Posted by babyelf
babyelf,
ur bh5 damn good! which brand of this ram and what about the week production?
i can't get the production week.. duno y.. not in cpuz and everest and i can't get aida32 anymore..
but here's some results after i bumped it up to 3.4v .. 3.3v is probably almost hitting the limit at 260mhz 2-2-2-5
4 errors at the 4 or 5th loop can't remember then clean test after that.. gonna run some 32mb later
http://img.photobucket.com/albums/v3...f/DSCN2350.jpg
It's the Mushkin PC3200 2-2-2 special(BH6),I've got the Mushkin Lvl2 V2 TCCD and it ain't them.Afraid I might have pumped a little too many V's in 'em.Quote:
Originally Posted by saaya
DFI LP u b,Vmodded 3.6v w/Hellfire 3EG REV2 bios,was tryin to push to 10x250 w/cpc off 2,2,2,11.Pasted memtest fine,then tried to prime,no go,went back to memtest..lots of errors.Sorry just got disgusted and took 'em out.
I've got new xp-m2600 ADYHA 0503 was just see'in what'd do,I'll retest later and report back.
Hello. that result are the normal ones of a few KHX3500 314we??? :(
To I never dress 244 2-2-2-11 in only 2.9v mounting in a NF7-S :rolleyes:
Byeeee
my bh5 doesnt give details in cpuz, everest or aida.
ive taken of the ihs
it says
Winbond
335WF
W942508BH-5
What week and stuff is it?
35 week 2003
Alright I got a pair of 512MB mushies;
they do DDR500 @ 3.2V on nf3]
they are week 35 2003
hey, thank you very much everybody for posting more and more results, its really appreciated! :toast: im glad to see im not the only one obessed with bh5 :D
but im relly busy atm, can you do me a favour and post your results in the right sheme so i dont have to pick up all the details myself? :(
please post all results following this sheme? thx :)
"2302D" 2.0-2-2 3.25v 235mhz (adata 3200 256mb@nf2)
"335WF" 2.0-2-2 3.2v 250mhz (Mushkin 3500 lvl2 512mb@nf3)
"335WF" 2.0-2-2 3.2v 250mhz (Mushkin 3500 lvl2 512mb@nf3)
thx man! :toast:
well even it was hot yesterday i took another benchie run first time trying 1:1 with 3.6V
here is the result:
http://www.casextreme.net/pixx/benches/258ramcpuzs.jpg
:toast:
http://members.lycos.co.uk/m4rd0k/xs...25-33_mini.jpg
338we 284MHz @ 3,66v
Quote:
Originally Posted by Rub87
Quote:
Originally Posted by gsan
its OCZ Value Ram series
the Ram has been rebranded and all info flushed, plus no heat spreaders
from what weve been told by OCZ is that its the same BH-5 Modules from the new Gold series
Edit:: im running, 2x512mb 230mhz 2-2-2-5 @ 2.96vdimm, memtest stable
running OCZ Value Ram, no clue on week info, no programs will tell me, and can find any info on the die numbers
running on an NF7-S, 230x11 2 1.85vcore
http://valid.x86-secret.com/show_oc.php?id=20500
"303WF" 2.0-2-2-5 3.5v 265mhz (twinmos 3200 256mb@nf3)
saaya, quick question.. i noticed something before i pulled the heatspreaders off...
you said to put something similar to the following ("2302D" 2.0-2-2 3.25v 235mhz (adata 3200 256mb@nf2)).. and i do see some numbers like that in the database... if i look on my mushkin special BH-6, it has the reg stepping... but there is a little IC at the bottom, visible with the heatspreader on... is 2402E, could mean some peeps r reading that instead of taking the full IHS off? jus wondering...
here is my Mushkin BH-6
"334WF" 2.0-2-2 3.2v 243mhz (mushkin 3200 512mb@nf2)
week 17,
year 2003,kingston hyperx 3500
http://img297.echo.cx/img297/2885/282fsbspi5jp.jpg
I have two more for you saaya :)
First set is my 2x256 Megs Corsair XMS PC3500 v1.1. One stick has 310we stepped chips, the other stick is half and half 310we, and 322wf.
In my DFI nForce4 motherboard, this set peaks at 273 MHz for memtest86 stability, using 1.5-2-2-3 timings, and 3.78V of VDIMM voltage. BIOS revision 510-2.
Second result is my 2x256 Megs Mushkin Black LII PC3200. All the chips are stepped 3052e. The sticks peak at 270 MHz for memtest86 stability, using 2-2-2-5 timings, and 3.89V of VDIMM. BIOS Revision 510-2.
Kingstone value Pc2700
263@3,3v 40 week 02year
At 3,6v 280Mhz
Infineon remark same but i dont know
year and week.
In dual mode they are doing the same
In memtest86 (test 5) 264@3,3
All on dfi infinity nf2
Ohh yeaahh - this dual will be mine for some weeks :rehab:Quote:
Originally Posted by culmen
Culmen sells me this sticks :banana3: .
Probably it's the best BH-6 dual in Poland and there are also only one BH-5 kit which can go higher (Mardok's :p: ) .
It's Kingston DW-60 and Infineon AT-6 - both PC2700 value rams ... :hrhr: .
Culmen's friend clocked this DW-60 stick to 281/3.6 V on DFI NF3 .. :up: .
My currently sticks scores :
HyperX PC3200K2 2x256 MB single-sided
Everest detects them as a 37 week of 2003 . I did't remove the heatspeaders so I don't know :hm: :
270/5-2-2-2/3.71 V
266/5-2-2-2/3.63 V
260/5-2-2-2/3.41 V
all on DFI Ultra-D NF4
Edit : New owner of this KHXes has taken off the heatspeaders, and now we know that this is 336WF orginal BH-5 :cool: (both sticks) .
Best Regards
Peter
Offtopic, but I smoked my NF7-s (for some reason a shotcut on the mobo's 12µv rail..) and ordered myself an DFI nf4 Ultra-D, as this is my first A64, what's the highest, safe level to put through a venicevdimm controller..?
Sorry but I continue a little this Off/T and I answer Rub :Quote:
Originally Posted by Rub87
On DFI NF4 you can easy go even to 4V vdimm (real can be even 4.06V) without any mods, you only can put a fan to Vdimm section- that's the only "mod" you need ;) .
Now On Topic back :) :
I remember that I also had 2 sticks of HyperX PC2700 256MB, some month ago - both remarked BH-5 to "0309 Kingston DW-50", twin sided :( .
One stick did 255 Mhz/3.53 V on DFI Lan Party Nf3, and second did 250 Mhz/3.3 V on DFI Infinity Nf2 :p: .
Best Regards
Peter
Did twinmos release some 256MB sticks of BH5 in there pro line? or did all of their chips of BH5 went into the 3200 cas2.5 with out selections ?