1.40v should be fine. I won't take mine past 1.40v, but many people say 1.45v is OK. There really is no guaranteed "safe" voltage, it's not possible to put a number on it. Intel state 1.3625 as an absolute max.Quote:
Originally Posted by redrumy3
Printable View
1.40v should be fine. I won't take mine past 1.40v, but many people say 1.45v is OK. There really is no guaranteed "safe" voltage, it's not possible to put a number on it. Intel state 1.3625 as an absolute max.Quote:
Originally Posted by redrumy3
E8600 Result @ 9*528 & 8.5*578 by plain water ,ambient 20-22C
http://www.vmodtech.com/files/orthos-528_155.png
http://www.vmodtech.com/files/32m-578_108.png
Nice one ! :up:
Here is my 24/7 on AIR. Q820A405. I know a lot of you will say this is too much voltage and heat for 24/7 use.... but we'll see. 1.44 in bios, 1.46v windows. Max temp during 19hours of small FFT was 76c. During gaming i may hit 55c tops. Idle at low to mid 30s.
http://img72.imageshack.us/img72/4431/4500do5.jpg
Ive found that everest v4.60 now shows both core temps and core 2 is now unstuck there is only occt and everest v4.50 that show the core as stuck....
Anyone else had this???
My core0/1 idle temps are stuck :( loads are ok.Quote:
Originally Posted by wilson
I will try everest v4.60, thanks...
My E8600 Q822A435 under ln2 at -128°C http://valid.x86-secret.com/show_oc.php?id=427484
http://images2.hiboox.com/images/410...cae62a980c.jpg
Aquamark3 with a MSI 4870X2 which is unfortunately mine :(
http://images2.hiboox.com/images/410...792b5bf8d3.jpg
Lots of things could have been optimised, but my p5e3 Premium got condensation, and I prefered to stop... I wish another ln2 session comes asap ;)
Impressive, push that baby some more.Quote:
Originally Posted by ToyTen
http://members.shaw.ca/wenpigsfly/smileys/thumb.gif Nice one ToyTen. Your GPU can be run at 850/950 when benching Aquamark, it should run at that fairly easy for such a short run.
Impresive stuff ToyTen mate! :up: Also Venom-Crusher, you have a chip to die for, most excellent on plain watercooling!! :toast:
My E8600 under SS (quite hot one- temperatures reached down to 30C:mad:)
http://valid.x86-secret.com/show_oc.php?id=428967
http://www4.slikomat.com/08/1008/5b7-Super-.jpg
Problem is in motherboard (having stability issues over 415FSB, because I got error in superPI at 16round when was between 5550 and 5700mhz...) Must get a new mobo...
My E8600 under SS (quite hot one- temperatures reached down to 30C:mad:)
http://valid.x86-secret.com/show_oc.php?id=428967
http://www4.slikomat.com/08/1008/5b7-Super-.jpg
Problem is in motherboard (having stability issues over 415FSB, because I got error in superPI at 16round when was between 5550 and 5700mhz...) Must get a new mobo...
E8600 / BlackOps / D-Ice Pot:
VCore: 1.7V -28°C
PLL: 1.5V
VTT: 1.5V
GTL0: +2
NB: 1.56V
NB GTL: +2
VDDR: 2.0V
DDR P-Ups: +2/+2/+2
Skew: 300
Amp: 800
PCi-e: 117
8-8-8-18 2T 2:3
68/L8/22/20/7/7
http://valid.x86-secret.com/show_oc.php?id=429480
http://img392.imageshack.us/img392/1476/5560gb1.jpg
http://valid.x86-secret.com/show_oc.php?id=429482
http://img392.imageshack.us/img392/4...04spi1mix6.jpg
http://valid.x86-secret.com/show_oc.php?id=429485
http://img392.imageshack.us/img392/5674/5200aquaqk8.jpg
http://img137.imageshack.us/img137/6...00sp32mlk3.jpg
Batch Q820A405 packdate 07/17/2008.Lapped TRUE with push n pull Yateloons 77CFM each idle temps of 48 to 51c. Load of 67c Why are my temps so high.Bios is set to 1.285v and it has a VID of 1.165v
Low vid chips usually run hotter. I'm sure you've checked the seating? Otherwise, reseat the cooler and make sure there is good contact; also, is the ihs concave, convex?
zucker is right like the e8500s the ones that take low volts to run high cpu speed run hot
i want to get the e8600, but dont know what the best mb is to get?
i wont be running SLI, any recommendations? i wanna OC!!
Get the new p45 mobo from Gigabyte, the UD3P, cheap and fast.
So true!Quote:
Originally Posted by Zucker2k
I got nice example just running here :D
My Q9550 whit vid 1.2500, not best vid that you can get but woah, it runs nice cool, to get over 70c i needed 1.41V and Intelburner Whit maxium ram test :up:
Stock voltage and 3.4Ghz, in idle it went to 27c whit 23c ambient :D
Well, I just sold my E8500 ($150) and ordered the E8600 from Newegg. Hopefully, I will get a good batch....
The old E8500 was not to shabby.
http://img149.imageshack.us/img149/9364/12109ix6.jpg
http://img149.imageshack.us/img149/8536/475cn9.jpg
Good luck whit that!Quote:
Originally Posted by PCTools
does anyone know if there will be a higher binned dual core than e8600 later on? perhaps e8700?
I should'nt think there will be. What i would like to see though, is a Multi unlocked version like the quad Extreme's. If ever there was a cpu crying out for a multi unlocked version, it's the E8600.Quote:
Originally Posted by WhiteFireDragon
Any idea on Q820A4x4 with 11 being the last 2 number from wafer code??
Q823A234, not really a steller performer, at least not was I was hoping for, picked this up at Newegg. I'm gonna exchange it and see if I get lucky. I thought I might have some stability at this speed, but after 16minutes of Orthos, it restarted my comp. Maybe its my mobo, my board doesnt officially support the E0s yet.