Printable View
Im not sure what you mean, but I took a small piece of wire and put it into the appropriate holes in the socket and then put the cpu down on top of it.Quote:
Originally posted by sky
gkiing...
yea same for me, not quite as high. btw, did you both wires in the socket? for some strange reason mine runs 200 with only the 166 mod in place (?) - doesn't matter to me, as i'm fine with it, lol.
yea same here. but iirc you had to make two of those tiny copper brackets. one to force fsb133->166 and another one to go from 166->200. the funny part with mine is, atm i'm just running the 166->200 bracket without the other one. and the cpu is a dlt3c 1700 - a default fsb133 cpu. this should NOT be working.Quote:
Originally posted by gkiing
Im not sure what you mean, but I took a small piece of wire and put it into the appropriate holes in the socket and then put the cpu down on top of it.
i tried the stuff shown here.
this is the pic how it should be done to get a default fsb133 cpu to fsb200:
http://www.abi02.de/deepblue2k2/hardware/nf7fsbwire.jpg
connecting ah28 to ah30 enabled default fsb166 (fsb sense 1), adding a connection between ag31 and ah32 finally enabled fsb200 default (fsb sense 0). atm i only have a connection between ag31 and ah32 which shouldn't do di-ck (<- that is being cens0red? wtf) for a 133' cpu - mine is one, so i shouldn't be getting fsb200 default just with that.. strange, eh? ;)
well, I've got the top one of those wires connected and after I flashed my bios my processor showed up as a 2500+ with a 166mhz default fsb (thats with a 1700+)
yeah sky i tried this because I've got a feeling that the L12 mod is messing with my ram a bit and i wanted to be able to have the L12 mod on/off quickly.Quote:
Originally posted by sky
i'm thinking about using a dipswitch to enable this mod via the solderpoints on the back of the board - did anyone try that? should work the same "shortening" the same pins as inside the socket, eh?
unfortunatley it didn't work and i've got no idea why, right now the mod is off, if i have any luck in getting it working i'll let you guys know.
http://server6.uploadit.org/files/fr33ze-PICT0535.JPG
i tried the socket mod and connected the ah30 to ah28 with a wire
i cleared cmos and i booted up, it booted with 100*5 user defined, so my guess whas that it worked, but the strange thing is i can't get any higher, on the other hand, it got me slower ( 215 fsb, before 220 )
i don't get it, did i do something wrong, what can i do?
Load optimised defaults and if it boots at the fsb u want then it worked. Check this in the bios.
i did it and it booted up @ 166 fsb
i will try and up the fsb later today and hopefully i can bench @ 220 fsb
let me get this straight... from what i've read....
i fi have a dfi board (or getting one)... i do not need an L12 mod (wire or bridge method) to get high fsb's with a mobile barton 2X00+
do i have this straight or am i on crack? :)
I am not sure but that pretty dyslexic. :):stick: DFI don't have this problem. I did read that some guy with a prommy and a fsb of 266Mhz was suggesting he may be having the problem. Worry about it when u get to 266fsb though.Quote:
Originally posted by shimmishim
let me get this straight... from what i've read....
i fi have a dfi board ..... am i on crack? :)
I am at 250fsb with xp2500+ running at 2.65Ghz, no such problems.
Yeah. Once I had a 2400+ mobile, the fsb would not go over 260... I thought it was the cpu, did the L12 mod with my lp b, but nope... nothing changed :(
Till I noticed that this 260-263 is the area where apic stops working :mad:
#SAE
i have a hard time belief that ypur GT is -63 idle at 2860 MHz @1,93
some thing like this :
http://www.tweak.dk/forum/attachment...fc51b1827b1b77
we all can make :
http://www.tweak.dk/forum/attachment...fc51b1827b1b77
MAX so far is -66
^Maybe his room is cold :p:
So this is useless to do on DFI boards?
My room is indeed not very warm... then those factory built unit ;) differ in charge and so on... I also have a pic where my new mobile is at -71°C idle at 11.5x257 :D It takes some time. But it can. And additionally you have the stopgrant mode in nb enabled the right way...Quote:
Originally posted by KoGeR|Max
#SAE
i have a hard time belief that ypur GT is -63 idle at 2860 MHz @1,93
some thing like this :
http://www.tweak.dk/forum/attachment...fc51b1827b1b77
we all can make :
http://www.tweak.dk/forum/attachment...fc51b1827b1b77
MAX so far is -66
I am very sorry if you don't believe me... most of the time with my mobile now it's around -55 to -60°C at 11.5x264 (3024) and 1.93V (vdrop)... load is around -50°C after a while... :thumbsup:
thats a nice system you got there SAE, one of the highest clocked mobiles i've seen, is it 100% stable at 3024 24/7??
#SAE okay... what is your room temp then ?
my is a 2400+ and it is stabil at 3007 MHz 24/7
My room temp's around 16°C atm :)Quote:
Originally posted by KoGeR|Max
#SAE okay... what is your room temp then ?
my is a 2400+ and it is stabil at 3007 MHz 24/7
I have average temps of -55°C when room temp is around 22°C+
I have a 2600+ at 3GHz+, but with my fsb it's not fully stable (to do prime longer than 1hour, superpi 32m only works sometimes...)
I could do superpi1m at 240x13 though, as well as pifast :cool:
/edit
P.S. I always run my fans on turbo :D
i use 12 x 230 2-2-2-11 but my board stops me :(
what is your fans on then ? 2200 rpm ?
i use 1300 with a avg temp at -50 c
Yeah. Fans at around 2200rpm but sometimes spinning up and down, not really constantly... maybe a firmware update would fix it???Quote:
Originally posted by KoGeR|Max
i use 12 x 230 2-2-2-11 but my board stops me :(
what is your fans on then ? 2200 rpm ?
i use 1300 with a avg temp at -50 c
do you have any "exp." with NF7-S ? i can use :D
Drop me a PM what you wanna know :DQuote:
Originally posted by KoGeR|Max
do you have any "exp." with NF7-S ? i can use :D
WOW Sae.. your only 12 marks away from 25k.. squeze that last bit out of your system!
I try I try ... :p:
But I am still trying different drivers... 3.1 were the best ones for me... (I am about trying 3.5, 3.2 and 3.7 :D )
The graphics card is what's holding me back... :(
hi there, i have a question to all those with the XP-M2600+ who passed the 225MHz FSB, which type of cooling do you have? & which vcore do you throw?!
casue i can't pass the 225MHz FSB with my IQYHA, though i reached 12x225MHz @ 1.85v :rolleyes:
11.5x260+ at 2V Vcore... L12 mod, and default wire mod to 1.775V.
not bad! :D using phase change, right?