Gautam, all stability testing I did was with 200 percent coverage memtest stability...hence the lower results (though that stick was still on the low side...370 3-3-3 crashed the system). I'd bet something happened in transit as the other stick wouldn't boot. :(
THat all said....even if there was no shipping problem (didn't inspect before I sent the kit to RMA to get the DOA replaced) my results are still major outliers....all sticks so far have just been GREAT :slobber:
2GB kit 667 3-3-3-8
http://img174.imageshack.us/img174/8...441225vbr8.jpg
holy .... nice nice nice :toast:Quote:
Originally Posted by andre X_X
i hope so my TeamGroup 667 Micron D9GMH - TXDD1024M667C3DC (2x512) will go at this level ;)
I can buy these type's of memory:
TeamGroup PC5400 2048MB Dual-Kit
CL3,0-4-4-8 @ 333MHz/DDR2-667 EUR 204,95
TeamGroup PC5400 2048MB Dual-Kit
CL3,0-3-3-8 @ 333MHz/DDR2-667 EUR 234,95
TeamGroup PC6400 2048MB Dual-Kit
CL4,0-4-4-10 @ 400MHz/DDR2-800 EUR 259,95
I would like to have 4GB, so the 55 euro difference is actually 110 euro difference, that's alot...any suggestions? :)
TeamGroup PC5400 2048MB Dual-Kit
CL3,0-3-3-8 @ 333MHz/DDR2-667 EUR 234,95
2x
anyone mind posting results for the 2gb kits ? The 667 and 800 kits..i can't decide between g.skill and team, how well do the team kits do with 2.4-2.5v?
TankGuys, I hope you dont run out of the 3-4-4-8 1G kits by tommorow morning, cause thats when I am ordering the my second kit :D
a question still nobody can answer :banana:Quote:
Originally Posted by andyisc00l
Patience my friend. Coming up in a few days :) Just wasn't ready yet to void the warranty ;)Quote:
Originally Posted by Pjoeloe
This is the 2gb kit of 667 3-3-3-8 test @ 2.44v (bios 2.5v)Quote:
how well do the 667 / 800 team kits do with 2.4-2.5v?
CL3
http://img474.imageshack.us/img474/4...343825viq5.jpg
CL4
http://img58.imageshack.us/img58/411...441225vqq7.jpg
on 2.4v mostly it runs 5-7mhz lower
Team 2x1gb 667mhz 3-3-3-8 or Team 2x1gb 667mhz 3-4-4-8 will be better in OC? about 40$
or maybe team ddr2 800 ?
thanks
mostly the same imo...
take cheaper ?? :DQuote:
Originally Posted by andre X_X
Whats the maximum voltage on this ram before the warranty is voided? 2.2v?
Just pick one, its all good stuff :p:
Take what ever you like..... :)
hhmm so how does she do at CL5 ? w/ 2.4v ?
man i gotta get me some of this ugh... gskill HZ or TG ... TG or HZ ???
and someone for the love of god find out if this can boot on the DS3 since it only uses 1.8v stock.
the gskill HZ boots fine. so this is could be a deal breaker
I've tested it on P5B Deluxe w/ 0402 BIOS, 2.35v.;)Quote:
Originally Posted by Lestat
I already told you it does. I've been using this stuff on a DS3 for a week! :nono:Quote:
Originally Posted by Lestat
It says 2.2v on the pack but OPB said 2.3v is the rated.Quote:
Originally Posted by Drunner611
anyone running this on DS3?
according to
http://www.xtremesystems.org/forums/...d.php?t=110460
DS3 does not like D9...
FYI Guys: We had to raise the Team memory prices a bit tonight, as supply costs have gone up (Team is charging us more). Just so you aren't surprised :)
Ignore the time, I had other stuff open, and I didnt use system cache.
2.15v on Aopen 975.
http://www.sspmustang.com/OT/ram-run6.jpg
The ram is pretty wicked!
http://img152.imageshack.us/img152/2910/11485ah9.th.jpg
anyone care to share their ds3 ram settings with team 6667 2gb 3-4-4-8?