I received an e-mail today, and they checked their steppings today. Just e-mail them and tell them what you want
Printable View
I received an e-mail today, and they checked their steppings today. Just e-mail them and tell them what you want
I'm looking to buy an Opteron with the next few days. Would it best to try my luck with Monarch (retail or OEM) or ZZF (currently have the 144's at $165). All I want is a processor that will do 2.85 - 2.9 GHZ stable on AIR.
deception``
so overall how stepping are in line?
BEST-WORST
1.CABNE
2.CABYE
3.X?
etc...
1. CABNEQuote:
Originally Posted by TEDY
2. CABYE 0540
3. CABYE 0536
4. CABGE
* CAB2E is known right now.
you mean CAB2E is unkown so far ;)
I think:
-CABNE from 0526 to 0536
-CABNE 0540 and CABYE 0540, they are similiar
-CABYE b4 0540
-CABGE
;)
So, ZZF does have the 144 retail. :woot: Anybody want to jump in and see what they are? ;)Quote:
Originally Posted by deception``
Are you sure that CABYE 0540 is same as CABNE 0540 ?
I didn't see any CABNE 0540 OK @ 3 ghz under 1.65v whereas CABYE 0540 are able to be stable @ 3 ghz with less or equal to 1.65V.
CABNE 0528 and 0530 appear to be okay at 3ghz by what I've seen with little exceptions. Don't know about CABNE 0540.Quote:
Originally Posted by eviLRuLeZ
Figures I just pre-ordered a 146 from tritech and no extra $$ left!! :doh:
I suppose by the time I cancel my order and they refund me ZZF's will be history so I will sit tight I guess.
Quote:
Originally Posted by xenolith
I just got off the phone with ZZF, and of course they said they have no way of checking what stepping they are. The lack of real time inventory control with US companies is starting to get very frustrating.
Just running my CAB2E 0540FPMW right now, and I can't hit 3 Ghz on water. :(
Will do 2.8 Ghz on default volts
2.9 Ghz on 1.50v (BIOS)
My 144 CABNE 0540 is stable at 335x9=3014Mhz with 1.648V, water cooling and IHS removed.Quote:
Originally Posted by xenolith
^ Well, that answers that question. Nice chip Nano. :toast:
I have receive 4 Opteron 146 BOX today, one for me, and other is already sell ! (CABYE 0540 FPBW).
I will test soon :)
What about the CABYE 0528, like mine? You guys seem to be forgetting about it, one guy got 2.9 I believe on stock volts earlier in the thread. Dammit I'm wishing I didn't get my card vmodded, I just want to use my computer :mad:
price ? why don't you reply in PM ???Quote:
Originally Posted by computersmsa
I have reply, I'm not here all time of the day :)
Thx man, big relief for me becoming part of the 3ghz family :banana:Quote:
Originally Posted by xenolith
Just tried 320x8 with 133 divider...rebooted after about 90 seconds of Windows. Think this mobo is just shti tbh...:(Quote:
Originally Posted by Kameleon
EDIT - Have now tried 1.3b7 mod, 1.3b6 1T mod, 1.8 1T mod, 1.C BIOSes - all won't do much above 300 HTT. Looks like I'm out of luck...
just got 2 144 CABYE 0536 GPMW but I havent decided on mobo to put them on :p: . I will get something for the weekend and I'll let you know...
just got my CABYE 0536GPMW (148)
Ill report back on how it goes under my prommy. Is there a cold bug with these chips?
Certain chips have had some problems, however those were few and far between others which had no cold bug.Quote:
Originally Posted by juzmister
The percentage chance of cold bug under prommy seems miniscule ;)
excellent :banana: :banana: :banana:Quote:
Originally Posted by perry_78
Quote:
Originally Posted by pcfreak
will u be going for a board with agp? i have a x800xl that kicks a$$ on my nf7s. but i dont want to have to get a card for pcie. i was thinking the asrock dual sata2 or a nf3 board with a good track record for max htt. my 146 will be here on the 8th :woot: .(ordered on the 7th of oct) :rolleyes:
can u guys give and good insight? :stick:
Just got my CABYE 0536 GPMW 148 this morning at present its doing 3058 on air, moving to water within the next week. My bios maxes out at 1.55volts does anybody know anyways round this without doing a hardmod?
http://img157.imageshack.us/img157/3...nair9aw.th.jpg
Micketh I have a similar board to yours, and have an Opty 146 on the way. What exact settings are you using?
Thanks,
Suman
just wacked the voltage upto maximum and trying to keep the ram below 240fsb atm for 1t till i can find out the limit of the cpu, for benchies i runthe 9x multi because it allows me to run at 334x9 with the 400/266 divider and keep my timings of 2-2-2-5-1. When i can increase the cpu voltage more Ill look into the ram divider. But for some reason I cannot up my voltage in the bios above 1.55 and its a realy pain because the cpu is failing in benchmarks at 3100+ but i rekon with some more volts and water Ill be able to get much more out of it.
*late night update* Got my 144 CAB2E (0540 FPMW) up and running YAY - no probs detecting it in the Asus A8n (did have my concerns). Seems to be running @ 30c idle at the very lowest rpm on my cooler too. Just putting an win2k3 and let it 'soak' for 24 hrs, gotta sleep, play tomorrow :)
spooky what voltage can you set in your bios? I cant go above 1.55 :(
jimbo you are the man!
I was wondering why I could never boot anything at 9x multi. I'll bet thats why many are having issues with various dividers also.
Of course I'll probably get a virus but I can't let that interfere with my oc. Fooling with 9x300 now.
I was wondering. Has anyone every bought from HERE? Know what stepping these are? They have a great price. $140 total shipped for the 144 retail box...
Those are some hot prices... Even the 146(although out of stock) is real cheap... I think it was $146. Monarch is selling those for $199 right now.Quote:
Originally Posted by Fallengod
148 CABYE 0528
Mach 2 cooling
Wootage-
http://www.ezarchive.com/aphextom9/A...3/cpu-3304.bmp
and i believe there's room yet for more!
AWESOME, where did you purchase your cpu from???Quote:
Originally Posted by Aphex_Tom_9
I finally got a CABYE 0540. Just as good as the early CABNE.. now if I only had a system to put it in :\
Nice oc tom! How much volts? Stock mach2? I'm picking up a lightspeed this weekend... hopefully.
Anyone else experience very high temperatures with a CABYE? My 3700+ San Diego CABGE hits around 55C max under heavy loads 2.75@1.67v in the bios. This CABYE went high 60's before I pulled the plug, 2.75@1.52v. Hotter than hell... Not a big fan of taking off the IHS just yet, not sure if I want to keep it.
This might be enough to push me off the edge into watercooling land. Apex extreme mmm, wheres my wallet.
yes. i have a 0528 CABYE that is a lot hotter than my 3700+ SD as well.Quote:
Originally Posted by Runner
mine hits upwards to 60Cs as well before I took off the IHS... then it dropped temps by 10C's or so.
ewiz.comQuote:
Originally Posted by FlyBoyGeo
yes that's a stock mach 2, i think i can push this even farther with say 1.7v...
Well...last week I bought a used APC Smart-UPS 1400VA (950W) unit with brand new battery to combat the voltage drop in my computer room, after I got it setup I now have constant clean 120VAC feeding all my equipments, I'd also noticed my PSU rails got a very healty boost, and above all....no more misterious and random reboot. I decided to play with the last 148 CABNE I got and push the envelop a bit further, so far this is what I got.....
Awww yeaaa......3.10Ghz on air baby!!!
http://www.xtremesystems.org/forums/...chmentid=39438
http://www.xtremesystems.org/forums/...chmentid=39440
Loading temperature is surprisingly cool...only at 38'C!! Idle hovering around 29~30'C :D
http://www.xtremesystems.org/forums/...chmentid=39439
:woot: :woot: :woot:
148 CABNE GPMW
CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 7, Stepping: 1
Extended CPUID: Family: F, Model: 27, Stepping: 1
CPUID String: 20F71
Processor APIC: 0
Processor: AMD Opteron 148 (San Diego)
CPU Speed: 3102.53 (310.25 x 10.0)
Revision: SH8-E4
Platform: Socket 939
Startup VCore: 1.400v
Maximum Case Temperature = 63C
I didn't bother to mess with the memory timing so I decided to set the mem divider to 166 and push the cpu first, though I wish I still have the first CABNE that I sold wickedld9 to play around with....hehe, that opty has MaxTcase of 67'C and needed less vcore to run at 3.0Ghz than this one, but in the mean timel....I think this one doing 3.10Ghz @1.60v on Big Typhoon is still pretty good! The APC Smart-UPS kicksarse...definitely a worthwhile investment for me. :toast:
alright, here is my gpmw without hs and cooled with 21°C water
later i´ll post some prime-pics.
http://foto.arcor-online.net/palb/al...3735613262.jpg
Great results Loki, thats some pretty amazing TCCD you have there!
@ loki, can you post a 1M screen please ???
THIS IS NOT AMAZING......IT'S A FREAKING WORLD RECORD TCCD RUN on 2.5-3-3-5 1TQuote:
Originally Posted by LoKi2k
AMBIENT TEMPS?Quote:
Originally Posted by ben805
ambient temperature is 23'CQuote:
Originally Posted by dinos22
If i can get my hands on a 144 CABNE 0540, should i go for it? Are those nice aswell, and not only the 0530's?
It's a bit overpriced, but not too much..
Well, I want the dfi expert (like almost everybody else) but I am bored wating for it and I might try the asrock mobo, so I can use my agp card until the prices drop a little more...Quote:
Originally Posted by Naasar
@ Micketh, haven't had a look at max Vcore in the A8N yet, but from what I understand, 1.55v is tops for this board. That is, unless you want to vmod. My p4 gigabyte board undervolts horribly, so I'll be interested to see how the A8n performs...
sorry guys, i can not take any pics. i had selled the ram. today my 2gb ocz will arrive. i will make some runs with this setup this evening.
:woot:
CABGE 0536 vpmw WITH AIRCOOLER
i put my rig to outside of house and temp was +4c
cooler is Zalman 7700 CU + 120x120 125cfm fan
here is sp8m time
http://img487.imageshack.us/img487/7050/super15an.png
:toast:
lol! very nice...
what loadtemps did you have with 4°C ambient?
I believe my CABYE has possibly the most horrible core contact so far, IHS removal is looking like an absolute necessity. I cranked up the voltage to 1.6 and just slightly upped the clock speed to 220mhz. 2.2ghz@1.6v with a TT Smartfan blasting at 5340rpm, which is roughly 85cfm, on a copper brick of a heatsink. It's idling at 64C, granted this is an AN8 I have it in right now, but with the latest bios's the temperatures are actually in line with other boards, some people even report them being too low. Sigh.
Edit: Testing it some more, it now has -1C air blowing on it, at stock settings under prime its 44-46C... Took 1.7v to even think about going into windows at 3ghz and the temperature was idling at mid 60's. Here's to hoping it fails prime at stock settings while not having -1C. If not, on to ebay it goes.
@ Spooky, well mine set to 1.55 does 1.584 most of the time so it seems to slightly overvolt is the 240 1T bug still aparent on this board? I dont really want to try because I dont want to have to open up my case again til i got my water to pull the cmos jumper :)
Overvolting i dont mind so much hehe. Wasn't aware of a 1T 240 bug (I'm new to A64's, first build in fact) is that 240 on the RAM or HTT?
Hiya, as i'm in the UK and returning my CAB2E can anyone give me a list of the stepping of CABYE that I should be looks for?
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.47V.pngCode:Opteron 146 CABYE 0540 FPBW
DFI nF4 Ultra-D 702-2 BTA
Puit Cooling -> Full = ~ 39°C
Max Stable -> 3120 MHz @ 1.62V
:love:
Very nice, unfortunately all are sold... :(
Lovely computersmsa! :clap: ,Quote:
Originally Posted by computersmsa
This is what i was looking for. Since my opty 146 CABYE 0540 FPBW is just ordered i hope to obtain such level of results.
Tested mine quickly during my lunch time,Quote:
Originally Posted by computersmsa
1M @ 3050 , 1.39v passed :toast:
Now www.komplett.no have 146 at their webshop, 10 day delivery. What stepping will I receive most likely? Anyone know?
Just ordered!
I don't know, i ordered too at komplett.nl.Quote:
Originally Posted by furyfax
I hope/suppose they are new batch, all old stock are sold I guess.
They are CABYE for sure.
Mine cabye 0540FPBW from alternate has also arrived from alternate.de . Totals costs were 160€ with shipment costs. And they have stock. I don't know if they all are caybe's 0540 FPBW but you can try.
Does anyone have already results from this stepping with a dfi rdx 200? And which you should set in the bios.
Dude, that's the same as komplett.se.Quote:
Originally Posted by furyfax
"Antagen leveranstid 10 dagar", which means they have no idea when they actually will show up. I hope you're lucky though!
My CPU is with fan, isn't most likely i get an older stepping then ? I guess komplett.no get their OPTY's from komplett.nl since they are in stock there. Can't take 10 days to ship a CPU from NL to Norway !
idle was around +25c and load was between +40c <--> +50cQuote:
Originally Posted by LoKi2k
wait a second, im posting my 26second superpi 1m result :) and my mem settings...
I got two of these CABYE 0540 FPBW on the way i sure hope they clock well :)
I wanted to buy 1 CABYE 0540 FPBW but the store that sell these cpu didn't answer me when I asked him If they opened all the boxed cpu... They aren't honest... they open the boxed cpu, take the best for them and If you order non pretested cpu you have a bad cpu.
Very bad attitude...
my settings for memory...
here it is
http://img374.imageshack.us/img374/1...etukset4yk.png
sp1m result
http://img286.imageshack.us/img286/9...1msuper0ql.png
:toast:
What BIOS is that you're running?
DFI NF4 I assume?
Well I have ordered before when aitem is marked the same way and then it came before the time. I just hope they are not screwing me!Quote:
Originally Posted by Mats
Quote:
Originally Posted by KeZzZu
try the super pi 1 M mod1.4
http://users.skynet.be/pt1t/144/1M_3051mhz.PNG with the Cabne 0540
Opty 146 cabbage 0536, my board has a proven fault that it will not work past ~ 291HTT so hopefully when I buy the DRI Expert I should easily hit well past 3Gig
http://i16.photobucket.com/albums/b2...0ne/1M2989.jpg
What is better... CABNE 0540 APMW or CABYE 0540 FPBW?
i have both ...Quote:
Originally Posted by Txaime
CABYE 0540 FPBW -> occt 3ghz 1.39v , full 37°
CABNE 0540 APMW -> occt 3ghz 1.7v , full 46°
(one of the best batch ...)
ok... somebody where buy this?
Seem like those lastest week of CABYE is doing better than the CABNE now..Quote:
Originally Posted by Pt1t
I wouldn't blame them too hard.Quote:
Originally Posted by eviLRuLeZ
A business really can't go and sell the CPUs on that individual basis.
You see, if they have a bunch of nice and a bunch of not so nice CPUs, what are they going to do?
They cannot take a higher price for the nice CPUs. But nobody will buy the not-so-nice CPUs if the buyer knows it is probably a lemon.
It makes much more sense to let everybody in the hope that they randomly get a good one.
There might be some who sell the known-nice ones seperately but honestly I don't think many shops would bother, too much work for not enough profit, and then you have the guy buying the good ones first complain the CPU doesn't go as high as expected and then get it RMAed from overvolting burnout. Not a good business model.
Those who are in stock in NL won't be shipped to Norway because those are supposed to be sold in NL, which they will be. :stick: What's the benefit of shipping CPU's to Norway when they can easily be sold in NL? It is you who assumes that it is this way. You have no idea where yours will from, and neither do I.Quote:
Originally Posted by furyfax
Distribution goes generally in one way, unless the demand is very uneven which I doubt in this case. Opteron is very popular. I just don't wan't you to be too optimistic about this, lots of people both in US and Europe have waited much longer than expected for this CPU. The massive demand is global, AMD's production and distribution channels probably have a hard time keeping up.
whoa! KeZzZu, what ram is that and how much voltage? omg 276 @ 2-2-2? !!!!!
I get your point but the answer is simple.Quote:
Originally Posted by eviLRuLeZ
If you want a pretested CPU then buy it there.
If you rely on your luck or want to buy a specific code then buy it somewhere else.
just a first tester out the box......rubbish ram at the moment but im just working the chip.
http://upload.sysxtreme.com/0.X/0.3499109/2700.gif
its a CABYE 0540 FPAW
I will have 2 146's next week :banana:
Ik hope it's the magic 0540FPMW or FPBW :toast:
What do you guys think?
I've forgot to say, 220W powered by a Antec cuz my Mean Well is K.O. (RMA).Quote:
Originally Posted by gbomb944
Here is mine
Opteron 150
OSA150DAA5BN
CABNE 0528GPMW
XXXX168G50056
Chip is stable at 3.55ghz @ 1.66v but I am having real trouble with the memory, anytime i attempt to increase the memory speed to above @175mhz, it BSOD's, at any CPU speed. I have a bios flash, drivers, and timings to mess with
Here is a quicky screen shot taken while i was looking for max PI OC, it ran a 1M
@ 3.6Ghz, but crashed when i tried to take the Screen shot.
http://www.gadtek.com/150-2.jpg
:woot:
Need advice on the best BIOS for DFI NF4 SLI-DR / Opteron 148 for UTT / BH5
Thanks for the help =)
Stable at 3.55 Ghz is incredible... you have any screenshots of prime @ 3.55? That SS is only 3.4. And what's teh cooling?Quote:
Originally Posted by Gadflyii
yesss, inquiring minds would like to knowwwwwwQuote:
Originally Posted by ojdr2001
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.58V.pngCode:Opteron 146 CABYE 0540 FPBW
DFI nF4 Ultra-D 702-2 BTA
Puit Cooling -> Full = ~ 43°C
Max Stable -> 3200 MHz @ 1.58V
OMG :eek: :eek: :eek: that's insane... 3.2ghz @ water... :slobber: :thumbsup:
How hot is too hot for these things? I have my 148 CABYE running at 3ghz @ 1.66vcore and its currently max'd at 57C when prime95ing. Is this too much or can it take some more?
that's a seriously fast SPI time for the MHz......whoa......if it can reach 3GHz 1M you'll probably go under 27s mark.....people here are having trouble going under 27s even with BH5 running at 273MHz....very nice..... :toast:Quote:
Originally Posted by alpha0ne
not that i have posted to the web server yet.Quote:
Originally Posted by Absolute_0
When i get home from work I will work on the box some more. The SS was snapped real quick as i found it's max OC, I got a 1M done at 3.6, but it crashed before i could take a Screen Shot. My board seams to max out around 300 HTT, any advice to stabilize it beyond 300 HTT?
Cooling is a Vaporchill LS
Gadflyii: Wow, i am SURE you want to sell me that 3.6Ghz Opty... Don't you? :D
No, but i got a 148 CABNE i have not even opened yet....
I can't believe a Opteron 144 CABYE sold for $499 on ebay! Geez some people are hella stupid on ebay. Linky
ebay is buncha stupid people.
Just got home with my 175 CCBWE 0530TPMW. Will post some preliminary results tonight after a while. Can someone PM me with info on how to run instances of SuperPi on each core?
Use Prime95. Extract the archive in two separate folders and run one instance from each folder. Double-check in the task-manager that every instance will get 50% total, that is 100% of each core.Quote:
Originally Posted by ixtapalapaquetl
SuperPI for stability testing is like getting drunk in the rain ...
http://mitglied.lycos.de/xxmartin99/...2754@1.552.png
Hello allihopa everybody ;)
Tomorrow I will hopefully recieve my new opteron 144 s939.
How well do you guys think this will do on a DFI lanparty-d, BH-5, and a zalman 7700 cooler. The cpu is a CABGE with a batchnumber about (...0026).
Thanks for answers