Water Cooled Case Gallery

looooooooove that cuplex xt. nice pics krueml

Hopper nice case but what are the specs of the watercooling i see a swiftech micro res :)

Quote:

---

Originally Posted by Burn

^That is why I like Germany- Excellent craftsmanship, attention to detail, etc.

We need more of that in American products. I'm not knocking our brand, just that it would be nice to have better attention to detail.

---

Germans are perfectionists indeed. Only if they weren't so obsessed with restriction and small tubing... :p:

hopper....you have alot of extra drive bay that are free, go get a better res, thats crap, if u have the money, they only run about 30 for a decent one an get some crome barbs

clean up your case too, it looks nasty

Whats wrong with the swiftech micro? IMO it's one of the best res you can buy.

Quote:

---

Originally Posted by fearilicious

hopper....you have alot of extra drive bay that are free, go get a better res, thats crap, if u have the money, they only run about 30 for a decent one an get some crome barbs

clean up your case too, it looks nasty

---

Actually the swiftech MCRES is one of the better ones, very well designed :)

21-24C idle on the e6600 cpu (stock speed)

storm block
BIP rad (possinly upgrading next time)
mcp665 pump
swiftec res


Cooler Master Praetorian modified by performance pc's (window) and me (top grill/paint/led ring power switch)
http://www.performance-pcs.com/catal...oducts_id=2725


p5w digital home/e6600/gskill 800
yate loon(spelling) top fans (orange 120mm)
seasonic s12 600w

next up i get a new gpu


very satisfied

http://img385.imageshack.us/img385/1056/dsc00968gw0.jpg

heres the loop for inspecting

I have a question, I've notice a some of these cases have just as many fans as a case that does not watercool. I thought the general idea is to cut noise down and get better performance. Kinda defeats the purpose of putting a case full of fans and watercooling doesn't it?

Unless they doing just for the "bling" factor im missing something..

Quote:

---

Originally Posted by markopoleo

I have a question, I've notice a some of these cases have just as many fans as a case that does not watercool. I thought the general idea is to cut noise down and get better performance. Kinda defeats the purpose of putting a case full of fans and watercooling doesn't it?

Unless they doing just for the "bling" factor im missing something..

---

You still need some airflow because of RAM, northbridge/southbridge (unless those are watercooled), and other motherboard components. But because this doesn't need as high airflow as when full-blown aircooling you can get away with slower and quieter fans :)

Quote:

---

Originally Posted by sladesurfer

Here's my set up:th_coolio:

---

Who makes that set up and did it cost a months salary?

markopoleo ...

my new wc rig is quieter, also i need alot less fans to keep my mb cool now that i dont have a hot cpu heatsink right next to the mb heatsink. also you dont need high cfm fans, the yate loon 120mm fans im running are so quiet you cant hear the 2 of those over my gpu fan. through the rad the air entering my case is still cool (useable) and i have a rear and front 80mm's to cool the insides. when i upgrade to quieter 80mm it will probly be nice and quiet.

so ya my setup is just as loud right now as some standard setups but the inside temp is probly alot cooler

also my pump is silent,, get the yl fans and the quiet pump when you build yours and you will be happy

Hi,
Some pics from my old watercooled Setup (actually Air)

http://img241.imageshack.us/img241/1487/3zl2.jpg

http://img376.imageshack.us/img376/9761/neu3gx8.jpg

http://img243.imageshack.us/img243/5127/444bx1.jpg

http://img311.imageshack.us/img311/5086/koxy3at6.png

http://img214.imageshack.us/img214/892/glanz2bj1.jpg

http://img186.imageshack.us/img186/779/koxy1ss8.png

http://img89.imageshack.us/img89/1495/koxybabe3wm6.jpg

My Polished Mips-DFI-Chipsetfreezer

http://img153.imageshack.us/img153/3316/mipsjd2.jpg

The follow things i have polished for a Friend at work
before:

http://img99.imageshack.us/img99/732/beforepimpct5.jpg

http://img428.imageshack.us/img428/4...repimp2il8.jpg

after work:

http://img169.imageshack.us/img169/369/heutezj4.jpg

http://img299.imageshack.us/img299/655/heute6yc0.jpg

http://img299.imageshack.us/img299/1199/heute10zq5.jpg


koxy

:eek: :eek: :banana:

hmm dang those sure are shiny...

hopper some cable management seems to be in order?
i suggest some round IDE cables or switching to SATA drives for your next upgrades.
also cut down tubing from res to pump, i am sure you won't need it to be that long...
and maybe watercool GPU also to maximize silence?

Hey Kox, nice to see you here, too.. :)

WOW :eek: :slobber:

Bling bling :banana: :banana:
Very nice work on the polishing :clap:

nice bling bling you got there, now run it :D

Very nice setup indeed, I like tubing its easier to see how water flows vs having lots of tubes going every which way.

koxy @ ur dfi-board dont you think..
- Better/Stable RAM Slots are both the Orange ones and not the yellow ones.
- dont u think u shud plug in all the power connections on the board?

Quote:

---

hopper some cable management seems to be in order?
i suggest some round IDE cables or switching to SATA drives for your next upgrades.
also cut down tubing from res to pump, i am sure you won't need it to be that long...
and maybe watercool GPU also to maximize silence?

---

hd is sata 2 seagate perpendicular the cable is the dvd, but ya i get it cleaned up and add a gpu

CORE 2 DUO E6600
ASUS X1900XT
ASUS P5W DH Deluxe
Cellshock PC2-8000 C4 DDR2-1000 4-4-4-12
Revoltec Chromus II RPS-500V2 500W
600Gb MAXTOR-SATA 2x300Gb/RAID0

Danger Den TDX BrassTop
Danger Den Tyee
Danger Den D5
Danger Den Fillport
Danger Den Deposito Fillport
Black Ice Extreme Rev. 2 Simple
Black Ice Pro Rev. 2 Doble
ClearFlex 12.5-18.75

http://www.design-gfx.net/oc.es/rl070.jpg
http://www.design-gfx.net/oc.es/rl071.jpg
http://www.design-gfx.net/oc.es/rl072.jpg

http://www.design-gfx.net/rl/90.jpg
http://www.design-gfx.net/rl/91.jpg

With EVGA nForce 680i
http://www.design-gfx.net/oc.es/evga05.jpg
http://www.design-gfx.net/oc.es/evga06.jpg
http://www.design-gfx.net/oc.es/evga07.jpg
http://www.design-gfx.net/oc.es/evga08.jpg
http://www.design-gfx.net/oc.es/evga09.jpg

Luz, Good looking Rig! Why do you have some Pics whit your P5B and some whit a 680i Board ?

Looks really nice!

Very nice pics Luz :clap:
From your nickname, im gessing you are Portuguese or Brazilian :)
Keep up the good work :woot:

[]´s m8

clean look, u should have an y-line instead of t-line!

Edit: and are you running with or without nb block? ur picture shows both.

here is my wc

http://i51.photobucket.com/albums/f3...er023Large.jpg

http://i51.photobucket.com/albums/f3...Theater028.jpg

Here is watercooled setup:

- CPU: Alphacool NexXxoS XP
- NB: Alphacool NexXxoS NBX
- 2 X Alphacool NexXxoS Extreme 2 radiators
- Hydro Seltz L20 and Noise Isolator water container

http://koti.mbnet.fi/dani69/Muut/vesijaahy_valmis.JPG

http://koti.mbnet.fi/dani69/Muut/vesijaahy_valmis2.JPG

http://koti.mbnet.fi/dani69/Muut/NexXxos_blokit.JPG

Here's a pic of my old system:

http://www.4eweb.de/pc/tj07/40.jpg

http://images18.fotki.com/v17/photos...MG_9033-vi.jpg

http://images19.fotki.com/v19/photos...MG_9036-vi.jpg

http://images19.fotki.com/v19/photos...MG_9032-vi.jpg

awaiting RD600

I've got a couple:

- Silverstone TJ06 with stealth cover over optical bays and psu area, with extra fans
- E6600, DFI Infinity with a Thermalright HR-05
- DD TDX s939, with a 3mm alloy plate used to adapt to LGA775
- D4 pump, BIP 2 and a fillport
- and some other stuff

http://img227.imageshack.us/img227/5...achmentbc0.jpg
http://img300.imageshack.us/img300/6...achmentnk7.jpg
http://img208.imageshack.us/img208/3...achmentgw9.jpg
http://img300.imageshack.us/img300/5...achmentht2.jpg
http://img208.imageshack.us/img208/2...achmentsl9.jpg

No pictures with pretty lights for that one.

And slightly more elaborate:

- old yeong yang (old as in it had a Pentium 2 inside) case, cut up for a side window, 120mm fans, and repainted
- Abit AB9 with an E6300, etc - it's in my sig
- DD TDX, BI Stealth GTS 240, D5 pump and a fillport

http://img222.imageshack.us/img222/6...achmentik8.jpg
http://img222.imageshack.us/img222/3...achmentrx9.jpg
http://img222.imageshack.us/img222/4...achmentuq8.jpg
http://img222.imageshack.us/img222/8...achmentof1.jpg
http://img213.imageshack.us/img213/4...achmentwn5.jpg
http://img213.imageshack.us/img213/4...achmentfe8.jpg

hmm Camb on the first rig you had your rad supplying your pump, i think most would say its supposed to be the T-Line before pump inlet, easier to fill and prime...

other than that, its a very nice and clean install, nice use of 3mm plate there.
and the yeong yang simple also, only usual suspect of cube cases are the back side of mobo where the wires are located...

Quote:

---

Originally Posted by krueml_

Here's a pic of my old system:

http://www.4eweb.de/pc/tj07/40.jpg

---

What has changed in your new system?
And how did you mount the rad in your tj07 case?

here is a pic of my setup:

http://s2.supload.com/thumbs/default...1116073333.jpg

Quote:

---

Originally Posted by Vandread

What has changed in your new system?
And how did you mount the rad in your tj07 case?

---

I sold it.. :)

The rad is in the part below, behind the PSU.
http://www.4eweb.de/pc/tj07/42.jpg

There you can see it...

http://s2.supload.com/thumbs/default/1116061155.jpg

Quote:

---

Originally Posted by hopper

http://img385.imageshack.us/img385/1056/dsc00968gw0.jpg

heres the loop for inspecting

---

Shouldn't res be before pump? Looks like rad - cpu - res - gpu - pump - rad. Should be rad - cpu - gpu - res - pump - rad

It seems to me it is :)
Look closer
the bottom barb of the res makes a 180 degree turn to the inlet of the pump... this pump has the outtake on top ;)

Yeah, look where the tubing from the bottom barb of the Micro res goes...it seems to disappear but the only place it could possibly end is the pump. And if you look closely, it does. The D5 can be turned on its side and mounted that way pretty easily, so I'd assume the upward barb is the outlet.

Quote:

---

Originally Posted by Garrett

It seems to me it is :)
Look closer
the bottom barb of the res makes a 180 degree turn to the inlet of the pump... this pump has the outtake on top ;)

---

Yeah, I see now. Probably was tired when I wrote the first post :P

The worklog: http://snipershide.us/index3.htm

Took me a month to get this all working proper, clicky link above for the full story. (no jokes bout water cooling kits or i hunt you down and kill yer kitten)

http://snipershide.us/images/sniper/...open_front.jpg

http://snipershide.us/images/sniper/...pen_back_2.jpg

http://snipershide.us/images/sniper/...de_close_1.jpg

http://snipershide.us/images/sniper/...e/cpu_done.jpg

big pic linky
http://snipershide.us/images/sniper/...complete_1.jpg

http://snipershide.us/images/sniper/...complete_2.jpg

hmm sorry man, not all of us have em kittens...
so no comments for now...

There's allways the animal shelter..... :P

kittens around here shoot back ;)

Hi m8´s :woot:

Here are some pics of my current rig, hope you guys enjoy it ;)

http://img.techpowerup.org/061119/EPSN0006.jpg

http://img.techpowerup.org/061119/EPSN0001.jpg

That´s right, it´s an Antec P160, but i painted it black and did some modifications.

[]´s m8´s

AWESOME job. love the look of the p160 in black.

Me to! Antec needs to smarten up. Most of us prefer black over silver!

Thanks you guys :D
I also really love the looks of it in black, its a beauty :banana:

Yup, Nice Job Foxy_PT

hey Foxy_PT, can you tell me what rad you're using, and what you're cooling?
Just out of sheer curiosity.

NOT MY CASE!
http://i2.photobucket.com/albums/y13...h/IMG_2459.jpg
http://i2.photobucket.com/albums/y13...h/IMG_2460.jpg
http://i2.photobucket.com/albums/y13...h/IMG_2462.jpg
http://i2.photobucket.com/albums/y13...h/IMG_2464.jpg

The Alienware W/C is kinda gay. Its got corrugated 1/4" hoses, a tiny pump, and a single 120mm Radiator. The waterblock is pretty simple, and theres a fan over it.

shoot, id still take one and mod it for a rad up top. i love em. hate the new versions ewww

http://i76.photobucket.com/albums/j11/bf2nut/w2.jpg

http://i76.photobucket.com/albums/j1...t/box4sale.jpg

http://i76.photobucket.com/albums/j1...f2nuts7950.jpg

http://i76.photobucket.com/albums/j11/bf2nut/rad-1.jpg

pic above showing the fans pulling off the rad with 1\2 in space as shroud effect from rad for max effiency with no fan dead spot..

http://i76.photobucket.com/albums/j1...verclocked.jpg

http://i76.photobucket.com/albums/j11/bf2nut/w1.jpg


sold 7950gx2 for $350 added $100 to it for evga 8800gts be here wed,also my single 150 raptor-x is installed with no recent pics as of yet til i get the 8800gts installed.22" Diamondtron NF Mon bf2 @ 1800x1440@70hz 100+fps.ppl ask whats the box underneath holding all my watercooling stuff?custom 18ga stainless steel box i built with plexiglass front holding swiftech p655 pump,dd tdk,triple 120mm rad on back,
1\2 tygon with the (2) 1\2 tygon tubes(inlet\outlet)coming up from the bottom and going back down into it.could never imagine putting a radiater inside my case sharing ambiet hot air with it?never get why ppl do that?radiater should never be in case period.13 case fans + water should be good i think.


ppl hurt my eyes when they dont loom there wires.... http://www.svc.com/sleeving.html $20 and 2 hours..
http://www.svc.com/sleeving-flexo-pe...3-colors-.html

bomb deals
http://www.svc.com/clearance.html

$80 stacker case blowout..
http://www.svc.com/promotions.html

Not as nice as most that's for sure. But here's mine anyway. I'm replacing my res with one of EK's. On the hoses they are only a week or so old but where it looks like air; it's some kind of spider web looking marks. No idea.



http://mybeta.imagepile.net/images/64038picture0231.jpg


http://mybeta.imagepile.net/images/53948picture0241.jpg


http://mybeta.imagepile.net/images/96381picture0251.jpg


http://mybeta.imagepile.net/images/36904picture0261.jpg

Hello all,

New to the forum. This is my second WC build - I think it turned out OK. Let me know what you think!

Aerocool Masstige
Swiftech Storm
Swiftech MCW60
Swiftech MCP655
BIP 2

http://img92.imageshack.us/img92/3944/img3021tq6.jpg

http://img214.imageshack.us/img214/6182/img3022to2.jpg

http://img92.imageshack.us/img92/385/img3025vy6.jpg

http://img226.imageshack.us/img226/4155/img3027vn8.jpg

http://img92.imageshack.us/img92/7906/img3028ik4.jpg

http://img208.imageshack.us/img208/1658/img3030by1.jpg

http://img226.imageshack.us/img226/2453/img3031wp7.jpg

like your choice of color :thumbsup:
I like green :D

Quote:

---

Originally Posted by spudnik

hey Foxy_PT, can you tell me what rad you're using, and what you're cooling?
Just out of sheer curiosity.

---

No Prob ;)

Here are the specs:
Swiftech Storm rev.2
Swiftech MCW30
Swiftech MCW60
Swiftech MCP655
Black Ice GT Stealth 120 X-flow
Black Ice GT Stealth 240 X-flow
Danger Den Dual Floppy Bay Reservoir
Tygon 1/2"

[]´s m8

ah green alien colors...

Here's a few pics. Loop consists of a 77 LTD single pass HC with four 85cfm Delta fans, MCW6000 modded for larger tubing, maze4 gpu, 7/16" masterkleer, and Laing D5.

[IMG]http://i105.photobucket.com/albums/m...y/IMG_0193.jpg[/IMG]
[IMG]http://i105.photobucket.com/albums/m...y/IMG_0198.jpg[/IMG]
[IMG]http://i105.photobucket.com/albums/m...y/IMG_0190.jpg[/IMG]

Little update. I just finished my dual WC loop. :)

http://i59.photobucket.com/albums/g3...al_Loop005.jpg

http://i59.photobucket.com/albums/g3...NoPanel005.jpg

http://i59.photobucket.com/albums/g3...B/491c5ed6.jpg

First loop (CPU only): Laing D5 pump > Swiftech MCR220 Rad > Storm Rev. 2 CPU Block> Coolingworks Bay Reservoir > back to pump.

Second loop (GPU and North Bridge): AquaXtreme 50Z pump > Swiftech MCW30 NB block > Weapon Heatercore > LP Maze4 GPU Block> T-line > back to pump.

Quote:

---

Originally Posted by cavfire

Here's a few pics. Loop consists of a 77 LTD single pass HC with four 85cfm Delta fans, MCW6000 modded for larger tubing, maze4 gpu, 7/16" masterkleer, and Laing D5.

[IMG]http://i105.photobucket.com/albums/m...y/IMG_0193.jpg[/IMG]
[IMG]http://i105.photobucket.com/albums/m...y/IMG_0190.jpg[/IMG]

---

OVERCLOCK THAT WASHING MACHINE!!!!!!! YEAH BABY!!!

;)

^^^ I'm a maintenance mechanic so my clothes can get pretty dirty requiring scalding hot water. This is the only way I can touch the lid.

here's mine right after I put it in and filled it up.

http://www.sanity-free.org/misc/wc/IMG_2912.gif

http://www.sanity-free.org/misc/wc/IMG_2915.gif

http://www.sanity-free.org/misc/wc/IMG_2916.gif

Is that res resting on your videocard? :eek:

Quote:

---

Originally Posted by Zeus

Is that res resting on your videocard? :eek:

---

madhatter thats a bad..bad idea i'm sure that in a long run that will cost you, it whould be really suck if that res whould leak to the videocard.

Quote:

---

Originally Posted by dedwards

Hello all,

New to the forum. This is my second WC build - I think it turned out OK. Let me know what you think!

Aerocool Masstige
Swiftech Storm
Swiftech MCW60
Swiftech MCP655
BIP 2


http://img92.imageshack.us/img92/7906/img3028ik4.jpg

---

Hows that upside down heatpipe working out for you? I've heard those northbridges heat up insane when using an inverted motherboard settup.

Quote:

---

Originally Posted by Solarfall

madhatter thats a bad..bad idea i'm sure that in a long run that will cost you, it whould be really suck if that res whould leak to the videocard.

---

hehe, it does look like it, but no. If you look reeealy closely you can see a rig that bolts to the mobo mount that its mounted to. it can actually leak w/ out touching the video card unless the case is on its side. they dont actually line up though it looks like it. the mount its sitting on can swing out so I can fill it up and swing it back in.

Finally a new mounting for my cpu-cooler. :)

http://213.202.211.105/gravedigga/pc...hellaussen.jpg

http://213.202.211.105/gravedigga/pc...nkelaussen.jpg

http://213.202.211.105/gravedigga/pc...ehlermacro.jpg

http://213.202.211.105/gravedigga/pc...laingmacro.jpg

MadHatter: Out of curiosity, which pump are you using? I can't say that I recognize it (yellow, integrated NPTM fittings, etc.)...

panworld 40px

here's another angle
http://sanity-free.org/misc/wc/IMG_2921.gif

neat little set-up.

also nice to see it being done inside a P180.

That setup sucks, you have no space to add an add-on card:(

I would never water cool in that case. Either go air or use thinner tubes.

I guess,

Sunbeam TT or even an AC 64 could hve been about £100 cheaper...

funkflix, what case is that? looks nice; i like the black

thanks,
jc

I can move the pump out a bit to fit in a sound card. I just don't have a sound card. I did have the AC 64 but im going for complete silence with a fair overclock.

That hose that disappears behind the big wires there, is that a kink I see back there?

Quote:

---

Originally Posted by SparkyJJO

That hose that disappears behind the big wires there, is that a kink I see back there?

---

:eek: Yeah, I think so too. Dude you should check that out. Any way you can go straight from the rad to the block or would that be too sharp?

:EDIT: How about also trying to shorten the distance between res and CPU block.

Btw, Foxy_PT, that rig looks awesome.

Usama aka Ferrari Freak

Yea thanks I did see that. I fixed it with the spring like material around the tube works great. I tried going the direct route but it does not work with that tubing I bought. Need to find more flexible stuff.

Quote:

---

Originally Posted by Rabidmoose171

Hows that upside down heatpipe working out for you? I've heard those northbridges heat up insane when using an inverted motherboard settup.

---

I haven't had any problems. The case has good airflow in addition to the WC.

DE

My renewed water cooling setup... nothing special.


http://shrani.si/thumbs/picture001oh9a.jpg http://shrani.si/thumbs/picture002oha4.jpg http://shrani.si/thumbs/picture008oha5.jpg http://shrani.si/thumbs/picture013oha7.jpg

A pic of my old rig..

http://www.4eweb.de/pc/wm051.jpg

And my sweety :D
http://www.4eweb.de/pc/bichrom01.jpg

krueml_, looks pretty... and what is inside?

It was a AMD XP 3200+ @ NexXxoS XP Rev.2, 9800SE @ NexXxoS GP2X-A, A7N8X-E Del. @ NexXxoS NBX-N.. rad was a Cape Cora 642 and pump a Laing DDC-1T @ watercool top..

My very first WC setup thxs to everyone at XS for helping :toast:

Some pics 4 U :D

http://i137.photobucket.com/albums/q...8/P1010158.jpg

http://i137.photobucket.com/albums/q...8/P1010160.jpg

http://i137.photobucket.com/albums/q...8/P1010155.jpg

http://i137.photobucket.com/albums/q...8/P1010153.jpg

I can not figure out how to turn the flash off this dumb camera :(

Looks good BooStFeD, except at the inlet of the pump looks to be a partial kink, not bad but it could be restricting flow. Kind of a tight bend.

Quote:

---

Originally Posted by SparkyJJO

Looks good BooStFeD, except at the inlet of the pump looks to be a partial kink, not bad but it could be restricting flow. Kind of a tight bend.

---

Thx for the kind words. I just noticed the same kink after posting these pics :) . When i was trimming the tubing i cut too short :slapass: . For now i put a small zip tie to help bring out the kink.

nice :D 6 fans...it has real difference to 3 fans?

ps: even tho its not a big deal like a kink or anythign at all,

the thumscrews on your cpu block are upside down. tadah! so like whenver you doing a remount or swapping cpu chip, cna flip em over

Some Pics of my watercooled Systems:

http://www.forumdeluxx.de/gallery/da...m/DSC04694.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04695.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04687.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04680.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04670.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04664.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04662.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04655.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04090.jpg



http://www.forumdeluxx.de/gallery/da...m/DSC04748.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04747.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04751.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04770.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04769.jpg http://www.forumdeluxx.de/gallery/da...m/DSC04771.jpg

http://www.forumdeluxx.de/gallery/da...m/DSC04775.jpg

Nice setup MFlox, welcome to XS, be it that this is your first post.

thx ;)



Some more:

My CM Stacker

with Revoltec DarkBlues:
http://img288.imageshack.us/img288/3485/dsc04351gs8.jpg

with Aerocool SilverLightnings:
http://img409.imageshack.us/img409/1817/dsc04360vx8.jpg


my "old" MSI 6800GT

http://www.forumdeluxx.de/gallery/data/500/DSC04752.jpg



and the new Asus 7950GT

http://www.forumdeluxx.de/gallery/data/500/DSC04646.jpg

http://www.forumdeluxx.de/gallery/data/500/DSC04644.jpg

http://www.forumdeluxx.de/gallery/data/500/DSC04647.jpg

http://www.forumdeluxx.de/gallery/data/500/DSC04650.jpg

http://img264.imageshack.us/img264/1474/simg3035uy4.jpg

http://img477.imageshack.us/img477/4093/simg3038ej0.jpg

http://img527.imageshack.us/img527/3630/simg3039ml1.jpg

http://img527.imageshack.us/img527/7040/simg3040ar1.jpg

http://img527.imageshack.us/img527/3122/simg3041gd8.jpg



http://img164.imageshack.us/img164/760/simg3043ad8.jpg

http://img46.imageshack.us/img46/3784/simg3044kd0.jpg

http://img212.imageshack.us/img212/1250/simg3047tc0.jpg

http://img129.imageshack.us/img129/6919/simg3046zs9.jpg

the pics aren't very good :( my cam have probs with the white light.

I'd love to see some results for a 7900gt(X/O) card on the memory for that heatkiller cooler :) cant find a review where they check difference in OC tough.

Very nice pics, MFlox and o$$i.
Those Heatkillers are one of the best looking blocks around.

Wilkommen bei XS, BTW :welcome:

@ Vandread

looking @ my sig ;)

@ jupiler

thx :)

Great Pics and Great Sys, o$$!ram ! :up:

Hey Flo, welcome to XS!

Took some more pics. Moved a fan and changed some wiring. Hope you like :D .

http://i137.photobucket.com/albums/q...8/P1010106.jpg

http://i137.photobucket.com/albums/q...8/P1010107.jpg

http://i137.photobucket.com/albums/q...8/P1010109.jpg

http://i137.photobucket.com/albums/q...FeD248/WC3.jpg

http://i137.photobucket.com/albums/q...8/P1010175.jpg

Can't you just drill two holes in the top of your case big enough to take a tube so you clould flip your rad over and have the side panel back on?

Just a thought. ;)