mmm that seems too low volts mate...o never had a chip that uses so lit volts for me its something else why dont you post your bios settings here ALL
Printable View
mmm that seems too low volts mate...o never had a chip that uses so lit volts for me its something else why dont you post your bios settings here ALL
Ill take pics from my BIOS.
HiQuote:
Originally Posted by andressergio
i use bios 2302 and IVY 3770K costa rica for test, bach : 3218C176
3208 have problem for me
thanks for your help with USB memory in ROG port and push bouton ;)
glad i helped did you tried 3209 wich i posted some pages ago ?Quote:
Originally Posted by fab-45
testing the Team X 2400 9-11-11-28 1T @ 2600 10-12-12-31 1T
http://img221.imageshack.us/img221/3...101212311t.jpg
Uploaded with ImageShack.us
Hello
i don t test 3209 bios, i just test 3208 with my maximus 4 EX + 3770K + gskill tridentX 2*4Go 2666Mhz
my trident X picture
http://imageshack.us/g/205/p1030674y.jpg/
do they work at 2666 ? on MIVE as u have a SB wont but on IVY yesQuote:
Originally Posted by fab-45
some tight tRFC
Team X 2x4GB 2400 9-11-11-28 1T tRFC 141 stock vdimm
http://img560.imageshack.us/img560/9...91111281tt.jpg
Uploaded with ImageShack.us
wish i can go further on that stable mem but 2600 even 2666 boot and can run hyperpi but not stable for games, maybe mobo limits poor P67 lol
i really dont miss my 2600K 5Ghz HT as i got same score with this IVY @ 5GHz / 2400 CL9
http://img703.imageshack.us/img703/1733/puntajewin.jpg
Uploaded with ImageShack.us
Here are those screenshots from bios i promised.
Im running it atm at 4.9Ghz 1.315v
http://dl.dropbox.com/u/47727912/bios-screenshots.zip
I picked up a 3770k today Batch#L206B383 to put in my MIVE until I decide on a MVG or MVFormula.
I updated bios to 3209 and put my 3770k in and booted up no problem. Bios will not allow me to select mutli over 35 so I switched bios to 3208 and same results???
Why cant I select multi over x35 on MIVE with bios 3208 and 3209?
i PM'd u mateQuote:
Originally Posted by deachus
Thanks, been messing with MIVE and figured it out. There is a special way you have to update bios 3208 and 3209 on MIVE. You have to leave USB stick in port, us EZ Flash 2 in bios to update but leave the USB stick in when it says completed successfuly and PC will reboot, then it will automatically go into bios and update a second time then it is complete, you then press clrtc.
I am now back up and running and can chance multi as desired.
Thanks, testing overclock now!
glad u figured that i was gonna explain on msnQuote:
Originally Posted by deachus
have fun !!!
Hi all. This we i reibuilt my system ad installed a new bios chip with 3208 bios but i have lot of ram problems.....
I i use all default settings and i try to use Xmp profile (4x4Gb Team Xtreem 2133; cpu 2600k) the bios read the right ram settings but the real mem clock is 1600 mhz! I use alla default bios settings and i try to set mem clock over 1600 mhz (1866 or 2133) the result is the same.
It's better i return to the 2xxx series bios?
EDIT: i made some tests no results with 3208 bios so i changed bios chip to 2302 and xmp settings are ok (mem runs at 2133). Now i shoult test if system is stable or not :-)
Inviato dal mio LG-P990 con Tapatalk 2
New bios 3211 available :
http://www.asus.com/Motherboards/Int...reme/#download
Someone try this new bios ?
yes :)
whit the new bios
I7 3770k 5GHZ vcore 1.384v bios set 1.385v
4.7GHZ vcore1.25v =1.24v
Guys help me
I just bought second kit with corsair vengeance 1866mhz.I mount them to mobo and shock. After switch on ... nothing. Black screen, lcd in stand by mode, mobo A2 code and nothing :( Im depressed
I try:
- demount new kit - false
- reset bios - false
- switch to second bios - false
- unpluged hdd - false
- change sata port - false
- change pcie port for gpu - false
Everything was working before. Now nothing is working... is my mobo is dead or what ? :(
Hey MalikQuote:
Originally Posted by Malik
so now aint working with the other kit that was working before right ?
do u have another brand of mem ? seems that your BIOS corrupted...u can try to flash it with ROG at the back
but pretty sure that if you test with another stick other brand will start...
try the ROG flash method
grab a flashdrive FAT32 formatted, put bios in renamed to M4F.ROM then put the flashdrive on rog USB port and press the ROG button for some seconds, let it flash till it finishes
Good luck mate
Sergio
Nothing happend. All time the same code. After pushing F1 i have code 34.
flash with NON 3XXX BIOS Malik flash other not the latest and test
Something happend, now i have A0 and hdd is working. I think is loading the system. But i dont have anything on LCD - black screen.Quote:
Originally Posted by andressergio
A0 its normal but black screen with A0 means that something wrong with mem gave me that when swapping kits the other day...so we are closeQuote:
Originally Posted by Malik
HAHA its working !!! I dont know how but after when i change cable ( LCD - GPU ) everything is working. Before i have mounted DVI-HDMI cabel and now i have HDMI-HDMI and all is fine. 4x4GB mems are working perfect :)
So where was problem... cable ? GPU ?
BIOS corrupted ;) glad you got it on mateQuote:
Originally Posted by Malik
Big thanks for help :)
Anyone why would i7 2600k not getting to above 5.02Ghz with any voltages, i can give 1.6volts, 1.65volts or 1.7volts and it wont go to 5.1ghz.
Its cooled by phase change.
I have also i7 3770k and same thing happens with it, wont go above 5.02Ghz on same board, i have posted screenshots from bios settings in previous page.
i7 2600k will do 5Ghz 1.380v and i7 3770k will do same with 1.390v.
no not 1.6v is a bad cpu ;)
Bad cpu, how come? Last time i tested on other board (Giga Z77X-UD5) it went to 5.4Ghz with 1.5v.
Problem is only with this motherboard and not with Giga.
I might replace this board with Gigabyte later if i cannot find solution for this problem.
Some Hynix CFR PBC action :P
Kingston HyperX KHX1600c9d3/4GB
Cost: 40€ :rofl:
http://imageshack.us/a/img692/3268/07m35359s.png
can u share a link to the model of this ram? on newegg or amazon?Quote:
Originally Posted by Counter CS
Hmm
You probably can not run the speed at 5GHZ an 2800MHZ ;)
what does the bandwidth say now ?
http://m.newegg.com/Product?itemNumber=N82E16820104244Quote:
Originally Posted by kagula323
Thats 1x 4GB you need to buy 2 ;-)
I buy in a local store.
I didnt had time to play with them, since my last post.
My 3770k + M4E P67 isnt able to boot at 5ghz last time i try...
Was with some G-Skill PIS 2300mhz ics PSC that was doing 6-9-6 2133mhz.
Already sold them.
Thanks. I'll buy today two sticks. Hope to get Hynix CFR. :)Quote:
Originally Posted by Counter CS
Quote:
Originally Posted by Counter CS
What voltage was used to get them to 2800MHZ?
Hi , NEW BIOS 3510
Maximus IV Extreme BIOS 3510
Improve system stability.
http://dlcdnet.asus.com/pub/ASUS/mb/...-ASUS-3510.zip
Aswering: i use 1.9v for 2800mhz :P only for benching
:clap: nice
Here is my report from bios 3510 '
small test to start with I7 3770k 4.5GHZ Vantage
I've got my vcore down to 1.35 old set with the bios was 1,385 with bios 3211
my ram also had less VMEM now I can take 0.5V of them at 2400MHz
can probably get more of my vcore, but the next thing I will go for a high oc,to start with, my mem also read much faster with the new bios :up:
opdat
4.8GHZ 1.350v
http://img41.imageshack.us/img41/7772/bios3510.jpg
5 GHZ jump whit vcore 1.475v whit the old 3211bios 1.5v
mem 1.65v :) bios 3510 vs 1.74v bios 3211
http://img222.imageshack.us/img222/2122/bios35101.jpg
Also bios 3510 got divisor 2800 working like Bios 3208 :-)
Hi guys!
I am thinking about change my MB to this asus MAxiums 4extreme or extreme-z. Im owner of a nice 2600k which works perfectly 4500 at 1.24v 24/7. I had MSI p67 gd65 but my mb is dead so i need a new one:) Tell me plz is there any difference in OC between extreme on p67 and z67? Price is almost the same so which to pick?;)
I would not recommend Maximus IV Extreme-Z for overclockers, i had 2 of these boards and bowth of them stop at 5Ghz. Gigabyte and MIVE P67 will do 5.4Ghz without much of problems.
But for 4.5Ghz MIVE-Z is ok.
Difference betwean P67 and Z68 is that Z68 supports :
1. Integrated graphics support
2. Use of Quicksync for video transcoding
3. SSD Caching
Hey guys how are you? Has anyone try the new BIOS 3603??? I need some help here, I buy this board and this is my first time using a 1155 platform. Can anyone help me to get a basic overlock???
Thanks guys :)
yes I use it
ok, and??? Is it work ok? Can you tell me something? :yepp:Quote:
Originally Posted by Martin.v.r
@Sharko google is your friend. This guide is a good start: http://www.techreaction.net/2011/01/...idge-v0-1beta/
sepol thank you very much for that guide!!! :)
Thank u for this info. I will buy in upcoming days asus m4e p67 then , i can have it cheap so im hoping that it will be a good change:)Quote:
Originally Posted by rintamarotta
i will recive this beauty in 2 days, im curious which bios is best for OC and most stable? i know that its individual thing, but there are some good ones and bad ones? any tips?;)
My bowth MIVE and MIVE-Z boards are running fine with latest 3603 bioses and 3770k and 2600k cpus.
MIVE running 5.2Ghz @ 1.425v (3770k) and MIVE-Z 4.9Ghz @ 1.40v (2600k) and theyre running pretty much all the time video encoding, no stability problems so far.
I havent noticed any differences in stability betwean the bios versions for bowth boards.
Thank u:)
I have this board pluged and working perfectly:) Its so far best and easiest MB i've ever had:) As now its perfect:) New bios is good and settings in bios are just awsome:)
I have a question which Sata ports should i use on my Vertex 3? Sata 1,2 are Marvell, and 3,4 are Intel's. Which one's will be better to use?
i may have made to many tweaks but i have low writte speed on my ssd having it on marvel's. REad is around 500 and writte is 140:(
140 ??? WTF? Did you try with intel?s ports??? I think the red ones are Sata 3 you should try with that.
Two top red ones are Marvel 6Gb SATA ports.
Next two red ones are Intel 6Gb SATA ports.
Next two grey ones are Intel 3Gb SATA ports
Vertex3 go for Intel 6Gb ports (red ones top of grey ports).
Im running intel 6gb ports in Raid0 at write speeds of 880MB/s and read speeds of 920MB/s.
I have installed my vertex on intel's port but i guess there is something wrong with drivers. Should S.M.A.R.T should be enabled in bios?
Also i am unable to install Windows 8 from usb:) I was jus curious how it looks and works but when i use windows usb/dvd tool (the original from windows) afterr booting what i see is blinking spacebar.
Maximus IV Extreme BIOS 3604
Improve system compatibility.
2013.05.17 update
http://support.asus.com/download.asp...HE7iDJrYucOm0n