a DFI NFII Infinity doesnt need a Vdimm mod right? It already has 3.3v in the bios?
Printable View
a DFI NFII Infinity doesnt need a Vdimm mod right? It already has 3.3v in the bios?
Children, children...settle down, or I'll get the rod.
Regardless of what 12x200 scores you can get at 2-2-2-8 or 2-2-2-11... the fact remains that I cannot run stabily at 2.4Ghz without pushing some serious juice 2.0V to CPU core... and then just barely.
yes, that's correct. :)Quote:
Originally posted by biohead
a DFI NFII Infinity doesnt need a Vdimm mod right? It already has 3.3v in the bios?
don't spank me. :DQuote:
Originally posted by ***Deimos***
Children, children...settle down, or I'll get the rod.
Regardless of what 12x200 scores you can get at 2-2-2-8 or 2-2-2-11... the fact remains that I cannot run stabily at 2.4Ghz without pushing some serious juice 2.0V to CPU core... and then just barely.
what cooling are you applying on the CPU?
some bartons are tough to overclock, just like there are always the dud ones. One of the bartons I had needed 2.0v to barely run 2.3ghz stable air cooled.
hows this?
this is about the best I can do with this Corsair XMS 3200.
it doesn't seem to like the voltages too much.
I don't get much of anything from 3.5 volts to 3.9 :(
just 6 measly MHZ...
oh well, better then nothing huh?
always got to get every last Mhz, even if only to break a goal.
when I got 3800, 3900 was my goal-then eventually 4000 if possible, but it doesn't look possible with this ram.
maybe a different BIOS would help...
APIC off, Clean Intall of XP Pro, 3.9 volts on ram, cas 2-2-2-11@266 mhz for 2.53 ghz all done with air cooling :D
Hey, nice OC Kunaak :) :thumbsup:
But did you notice turning off APIC resulting in much lower bw efficiency? 92/85% is bad ;)
Could be better... :D Maybe you could break 4000 this way ;)
Good luck.
Edit:
And using win2kpro will yield you better bw too :D
I was benchmarking for 2 days with Apic on, before I turned it off and did a repair install of the OS, with Apic Off, there was no difference.
Xp boots at speeds 2000 just doesn't handle, so I choose Xp for these shots.
http://mitglied.lycos.de/rookiekille...2K/protalo.JPG
i have 4gb/s @ 260 fsb 2-2-2-11-10-12 :banana:
kingston khx3200 @ 3.3 volt
I get 4000 at 254 fsb.. that's what i call "high torque".
what mobo? =o)
That's really strange :confused:Quote:
Originally posted by Kunaak
I was benchmarking for 2 days with Apic on, before I turned it off and did a repair install of the OS, with Apic Off, there was no difference.
Xp boots at speeds 2000 just doesn't handle, so I choose Xp for these shots.
I so often hosed up my winXP that I switched over to win2k... never regretted it :)
Edit: I think it's more bad if you do not re-install win with apic on... perf-wise, I mean. Clean install is holy... ;)
DFI Lanparty b. :)Quote:
Originally posted by rookiekiller
what mobo? =o)
ASUS A7N8X DLX 2.0 (Über 1007)
10*257MHz (Barton @ Duron), Air cooled -6.5 dec.
2*256MB KHXPC3000, 11-2-2-2
3984/3727MB/S
Here's my Infinity, AXP 1700+ and Twinmos BH-5 result :
http://www.geocities.com/henry_moniaga/dfi_261fsb.txt
http://home.kabelfoon.nl/~vnrswk/4191MBS.jpg
DFI Infinity
2400+ Mobile
Vdimm: 3.59v
VDD:1.9v
Vcore:1.85v
4K :D and mobo @ R.I.P ;)
http://www.saunalahti.fi/~chedu/team...dra4krikki.gif
http://www.saunalahti.fi/~chedu/team...dra4krikki.gif
4.1K Finally :D :D
http://www.geocities.com/henry_moniaga/dfi265fix.txt
If u use 9,5 or 10,5 you will get 4K float easy.. 10 is a bit slower. I went over 4K float @ 270MHz x 10,5.Quote:
Originally posted by RAMMIE
DFI Infininity
Mobile Barton 2400
2x256 Buffalo PC3700
Hello Overclocker friends.
Is this the very well known DFI "supermobo"?
http://www.databutikken.com/dk/datas...Id=DFILANNF2UB
Sry, but is in danish..
http://upl.silentwhisper.net/uplfold...zsisoft1gb.jpg
:toast: 1Gb powa... Not maxed ;) need beter out temp ;)
congrats... :slobber:
With 2x 256MB HyperX PC3200 BH-5 & stock DFI Infinity
http://mitglied.lycos.de/freshmeat666/Sandra261.jpg
Is this thread no longer a sticky?
http://www.zone.ee/tomz/data/rekordi...ndra_2k4.jpg?2
corsair bh-5 @3.2v
Hell yeah my thread still lives!!!! RAWR!
can I see a sandra2004 screen just like mine ? ;) with all the numbersQuote:
Originally posted by IamAnoobieCheez
damn.
DFI does have more bandwidth clock for clock, indeed...
... No Wpcredit tweaks no nothing..
using a little tbred chip.
Lanparty b @ 200fsb
oh and increasing fsb (i need 2 mhz to get the same score as you:D) , sandra benching then lowering fsb opening cpu-z doesn´t count ;)
i only changed 2 offsets that change two timings , some that are on the dfi bios
if you can do that score lots of guys can do it because you dont need wpcredit for it , just bios ill test it tomorow at a friends with the same dfi bios