Intel 65nm overclocking thread

Printable View

Show 100 post(s) from this thread on one page

05-21-2006, 01:55 PM
toledo

Quote:

Originally Posted by V I P E R

When I apply some thermal paste in the CPU center and put the STORM, the thermal paste spreads good on the whole IHS and on the block stays a nice layer too, so I think that the contact is very good. The temp at that speed running 4x SP2004 is 60c, and the ambient is 28.

WTF ??? . There is something wrong here , my 651 at the same vcore same ambient temp and 5Ghz is running at 68C . I'm using a Switfech Apex kit ( Storm , MCP655 and dual rad ) .

Bad IHS ???? :confused:
05-21-2006, 02:37 PM
nutcase

Quote:

Originally Posted by IluvIntel

I had a look today on the Intel Proc spec finder list and the C1's are still not listed for Pentium D's. Here
Same for 6x1 series here

Don't see why they could be retail yet. :shrug:

The Spec finder is SOO far out of date it is useless..

I have a P4 506 here with a code of SL8PL with a pack date of 02/02/06. But by the spec finder, it says it does not exist
05-24-2006, 02:02 AM
milen_bg

I bought D930 from newegg and with MB asus P5LD2 Deluxe (droop mod) did that :banana: :banana: :banana:

4,65 Ghz -stable

http://img91.imageshack.us/img91/228...t4656yu.th.jpg

all D9x0 produced april and later are very overclockable it is my secon CPU D930 which clocks very well

pack date 06 april 2006
05-24-2006, 02:06 AM
jVIDIA

milen_bg, what is the pack date of that CPU ?

EDIT: thanks ;) My 940 has the pack date = 16 of April :)
05-24-2006, 02:28 AM
^don.k's^

Just got a 930, 4,25ghz stable at the moment @1,3v, just 10mins testing, running R@H w/o problems, going further... :D
05-24-2006, 11:01 AM
JoeBar

Seems that u're all quite lucky or it's me unlucky.
My 940 with pack date 19 April tops @ 4.52ghz even watercooled... :(
05-24-2006, 11:10 AM
^don.k's^

After some test it's not as good as i wondered( i guess i wondered too much :p: ), not bad tho.

4,35ghz@1,35volts, dual prime ran for 1 hour w/o errrors, R@H going on... BTW i can't bench @4,65ghz even with 1,5volts... :( Tomorrow i'll try again, i get over 70ºc temps, here is too hot... Ill upload some pics when had the job done. :D
05-24-2006, 05:35 PM
proth

631 bench @ 6GHz
http://img138.imageshack.us/img138/4...1m216720td.jpg
05-25-2006, 01:46 AM
hot_fifty

proth is that SPI on water?
05-25-2006, 02:16 AM
Athens[2004]

i saw 235 οn aibooster so the temps are subzero
05-25-2006, 06:17 PM
J-Rock

1 Attachment(s)

I just got 940 3.2Ghz B1 Pack date 05/04/06 very hot chip, this is on water :p:
05-26-2006, 01:07 AM
jVIDIA

My 940 sucks. I need 1,43 to get 4.2 pass com 2 runing SP2004. :(

And the IHS is garbage like my 920 was ! I get 70º @full with WC !! OOOh men ...

J-Rock ... what is you full temp ?
05-26-2006, 02:31 AM
J-Rock

1 Attachment(s)

Quote:

Originally Posted by jVIDIA

My 940 sucks. I need 1,43 to get 4.2 pass com 2 runing SP2004. :(

And the IHS is garbage like my 920 was ! I get 70º @full with WC !! OOOh men ...

J-Rock ... what is you full temp ?

My 940 temp idle 40C and full load 51-52C using swiftech kit. this pack date good stuff B1. Actually, Im waiting for stepping C1 must be better OC but sick of waiting :mad:

Here wee goo! 5Ghz :woot:
05-26-2006, 03:24 AM
Blue078

Very nice 940 J-Rock :toast:
Which Swiftech water block do you have ?
05-26-2006, 03:38 AM
IluvIntel

Quote:

Originally Posted by hag6br

The Spec finder is SOO far out of date it is useless..

I have a P4 506 here with a code of SL8PL with a pack date of 02/02/06. But by the spec finder, it says it does not exist

Thats sad for intel to display out of date info like that, hope its not the same with the much discussed conroe when it hits town.
05-26-2006, 04:22 AM
nicepun

Anyone with a C1 stepping Presler??? I'm ready to buy a 950, but I would like it to be a C1.
05-26-2006, 04:26 AM
albertwesker

@ J-Rock
very nice result for a 940er B1
05-26-2006, 09:15 AM
JoeBar

Quote:

Originally Posted by nicepun

Anyone with a C1 stepping Presler??? I'm ready to buy a 950, but I would like it to be a C1.

No info as of yet. :(

@ J-Rock. Is this fully stable?
05-26-2006, 03:41 PM
mrhelix

J-Rock too cooool!
Can u try to use DICE or LN2 on your 940 :D :D :D
05-26-2006, 03:47 PM
mrhelix

Quote:

Originally Posted by JoeBar

No info as of yet. :(

@ J-Rock. Is this fully stable?

Hmmmmm I think its OK J-Rock can passed PI32M :toast:
http://www.vmodtech.com/files/5ghz_32pi.jpg
But right now , I think he will try it 5.2GHz :D :D :D
05-26-2006, 05:18 PM
Friday~13rd

Quote:

Originally Posted by mrhelix

Hmmmmm I think its OK J-Rock can passed PI32M :toast:
http://www.vmodtech.com/files/5ghz_32pi.jpg
But right now , I think he will try it 5.2GHz :D :D :D

:D Wow...
5.0 Ghz. It's gift for birthday J-Rock 555 ???

[Next Step...6.0 Ghz. ?????]
05-26-2006, 05:23 PM
proth

Quote:

Originally Posted by hot_fifty

proth is that SPI on water?

LOL... DRY ICE.
05-26-2006, 07:27 PM
Lightron

Oh Exellent :eek:
05-27-2006, 11:26 PM
PcCI2iminal

new Cedarmill for my workstation

http://img99.imageshack.us/img99/1333/8257xv.jpg

http://img99.imageshack.us/img99/1745/82512288a9cn.jpg

http://img81.imageshack.us/img81/653...default1hq.jpg

http://img99.imageshack.us/img99/461...ghzcpuz2xa.jpg

5ghz is the max clock on air

benchs soon

M/B ：Asus P5WDG2-WS
CPU ：Cedarmill pack feb/14/2006
CPU Cooling ：Thermalright HR-01(120mm x 1500rpms)
MEM ：GSKILL F2-6400PHU2 2x512mb (Elpida)
HDD ：Raptor 74gb @ 10k
VGA CARD ：X1900 @ CF
POWER: Zippy Gaming Edition 600w
OS ：WIN XP SP2
05-28-2006, 12:15 AM
jVIDIA

PcCI2iminal, one more great cpu !! :slobber:

Parabéns :toast:

Only I don't have that luke :( :(

My 940 only does 3.8 on def vcore ! It really suck's .... going for a 930.

Ainda não deitas-tes a mão num Conroe ? ;)

Show 100 post(s) from this thread on one page