Printable View
It’s fully on air so it doesn’t look like morphling’s Monster but I’m happy whit it.
:D
Anyway don’t laugh at my GC (SIS 4 MB) Am buying a RADEON 9100 on Sunday so seeya then…
;)
If you like to compare… go ahead… you’ll be sorry. :cool:
:toast: :banana: :banana: :banana: :toast:
http://service.futuremark.com/compare?pcm=1123764
keep trying :)
2550MHz is the max I can do 3D @ so far.....been folding @ 2500MHz for the past few days...but I've got a warm water problem I need to work out...seems removing my radiator shrouds to get the rad inside the case had much more of an effect on my water temps than I ever thought it would. Be back with more! :D
I have some results on my week 3..
http://www.algonet.se/~andsuo/1700plus_revbweek3.gif
I haven't tried higher yet, lack of watercooling. It's aircooled by a shuttle heatpipe cooler with a sunon @very low rpm. idle at 47-48ºc at default vcore
After seeing what that JIUHB 0304 did at piopioshardware, I just didn't resist buying them all at a local hardware shop. :D
All XP1800+ JIUHB 0304
None are overclocking xtremely well though, but they all seem to do 2300mhz at a 'low' 1.85v. :)
Your links don't work either. :)
if you paste them in a ie-window they work for some odd reason.
I can host those images for you if you want.Quote:
Originally posted by Catzter
if you paste them in a ie-window they work for some odd reason.
My JIUCB does 2000 at 2.85v.
NO fair!
Hey people,
My first post on the forum, so take it easy on me (pls:lol:)
Got out today on the lunch break and got myself a JIUHB 0303 morphs favourite brown color. (cant let you guyz have all the fun there). Now cant wait to get home and fire it up. Next week plan to get myself an 8RDA+ (is it good choice?).
Got KT3 Ultra ARU to play with the TBred for now.
Any suggestions on what to look into, overclocking on this board?
Also I got a Radeon9700 pro and a crappy Sammy PC2700 memory.
Any input is appreciated
really a good system, just swap ram for a faster one and you'll be :thumbsup:Quote:
Originally posted by Static
Hey people,
My first post on the forum, so take it easy on me (pls:lol:)
Got out today on the lunch break and got myself a JIUHB 0303 morphs favourite brown color. (cant let you guyz have all the fun there). Now cant wait to get home and fire it up. Next week plan to get myself an 8RDA+ (is it good choice?).
Got KT3 Ultra ARU to play with the TBred for now.
Any suggestions on what to look into, overclocking on this board?
Also I got a Radeon9700 pro and a crappy Sammy PC2700 memory.
Any input is appreciated
Yep, good system, just a little better memory, but if you make voltmods for chipset (simple) you can get quite a lot even out of that Sammy. btw if you got by any chance rev C chips, then that modules should clock very well.
And of course welcome to xtreme :toast:
Hello Xtremers,
I've been following this thread for weeks now, and I thought I'd chime in now that I have a minimal OC system myself. I acquired myself a JIUHB 0302 1700 and a Gigabyte GA-7VAXP board and have achieved 2.1 Ghz at stock voltage, on o2 :^) My multi is at 14x because of the Micron PC2100(running@150) I've got, but I will undoubtedly grab some better RAM in the near future, and bump the FSB speed higher. It's been exciting watching everyone here succeed OC-ing with these 'New' CPUs!
got mine @ 2080 (166*12.5) @ 1.575V dont wanna push the FSB to hard since I want my videocard and nic to stay happy (as i know it my mobo doesnt lock PCI and AGP frequencies:( )
Unfortunatelly the mobo doesnt give me nothing higher than 12.5 multiplier. Is there a way to unlock it? (heard something about the wiretrick -> please provide with links :p)
Hope to squeeze much more from the chip when i get 8rda+
Cheers
Welcome te xtreme, Cmnore :wave:Quote:
Originally posted by Cmnore
Hello Xtremers,
I've been following this thread for weeks now, and I thought I'd chime in now that I have a minimal OC system myself. I acquired myself a JIUHB 0302 1700 and a Gigabyte GA-7VAXP board and have achieved 2.1 Ghz at stock voltage, on o2 :^) My multi is at 14x because of the Micron PC2100(running@150) I've got, but I will undoubtedly grab some better RAM in the near future, and bump the FSB speed higher. It's been exciting watching everyone here succeed OC-ing with these 'New' CPUs!
How did you get the 14x multiplier? I can't choose anything above 12.5x with my epox 8rda+.
What chip do you have in that RDA Rich? There are chip mods that I know of that will allow over 12.5 on that board.... bowman and I have both done our 2600+/333 to allow higher multi's, and deathstar13 did a 1700 that I know of.
Actually I just realized I am in the 1700 thread....
Here is what Deathstar13 did to his chip to achieve the multi's Rich.......
http://forum.oc-forums.com/vb/showth...89#post1497289
Thank you for the welcome, Rich!
To tell you the truth, I didn't do ANYthing to get to 14x. The board just seemed to...let me do it. It must somehow bypass the CPU's +8 switch somehow, or at least ignore it. I've heard that some boards will do this. Mine seems to be one of them. Last night I tried to push things a little harder, and I got the system to 15x 148. For some reason the RAM didn't like running at 150 when the multiplier was switched. Voltage? I did have to bump the Vcore to 1.72 to get the system to boot. Now she seems stable as heck. Haven't done a torture test, but she ran XP and Sandra's tests just fine. My new speed: 2219! With PC2100! Can't wait for better RAM. She runs at 41C now. Guess I need a case fan...
Just spent two hours on amdmb looking for any kind of mod to get the multiplier higher than 12.5 (keep finding wire tricks for 2400+ etc. - obviously not what i need)
Would anyone be so kind to tell me how to do it (my mobo is KT3 Ultra ARU) or give a link?
Thnx
PS: question to morphling: whats your theory on why brown colored 1700+ are better?
Seems to me so far that I have to cut bridges on L3 to get higher multiplier.
Any suggestions on how (easy it is) to cut them? What is the most used method?
Thanks
Thanks for the info, will try it out. :)Quote:
Originally posted by muzz
Actually I just realized I am in the 1700 thread....
Here is what Deathstar13 did to his chip to achieve the multi's Rich.......
http://forum.oc-forums.com/vb/showth...89#post1497289
http://www.ocinside.de/go_e.html?/ht..._painting.htmlQuote:
Originally posted by Static
Seems to me so far that I have to cut bridges on L3 to get higher multiplier.
Any suggestions on how (easy it is) to cut them? What is the most used method?
Thanks
NP mang... he did it on the rda, so I figured ya may wanna see his results.
HELL IS IN ME!!!:flame:
Am so happy!!!!!:banana:
Let's make a :toast:http://republika.pl/overklocki/benult.jpg
damn it, my week3 didn't post at 180 fsb, I dunno if it's the motherboard, the cpu or the ram.. I don't think it's the cpu though.. I'm using a shuttle SN41G2 so I think that might be a problem in that.. they are not really made for overclocking.. but 11x166 is rock stable, and it's pwnz a p4 2,4 just a little.. so I'm happy :D
http://w1.871.telia.com/~u87122646/bilder/sandra/
linky to sandra benchies