Agreed playing with tWCL 5 today. Post up in a biTty
Printable View
Agreed playing with tWCL 5 today. Post up in a biTty
i've put some profiles for X01 bios on teamau FB page with testing notes as well for PSC air, ln2 and samsung ics also
https://www.facebook.com/teamauoc/posts/189201097921759
XBrytanX - 5:58:125 - 49x102.60 - 1429.6 MHz - 9-12-12-16-106-1T - Asrock -OCF - Gskill 2600 C10 (HCH9) - 2x4gb - 2.183v - h2o/LN2
http://imageshack.us/a/img571/9831/pdv9.jpg
Fosco - 7:28:219 - 40x100 - 1333MHz 8-12-8-31-110-1 - GIGABYTE Z87X-OC - 2x2GB GSkill Flare (PSC) - 1.9550v - H2O/Air
http://i.imgur.com/t7gbKsO.jpg
Bump that uncore and put maxmem to 600-700 and run wazza mate
What are the RTLs and IOLs like?
40/41 and IOL 5
About to install a better tweaked xp and give maxmem and wassa a go :up:
Some average PSC for your viewing pleasure ..
XBrytanX -7:19:781 - 49x100.06 - 1333.5 MHz - 7-11-6-24-79-1T - ASRock -OCF - Gskill 2200 C7 (PSC) - 2x2gb - 2.163v - h2o/LN2 -140
http://imageshack.us/a/img33/5402/fk9t.jpg
http://imageshack.us/a/img28/7605/z2dk.jpg
XBrytanX -5:57:516 -50x100.06 - 1333.5 MHz - 7-11-6-24-79-1T -ASRock OCF -Gskill 2200 C7
http://imageshack.us/a/img855/5036/j528.jpg
http://imageshack.us/a/img23/7084/ljpj.jpg
Did some more playing with RAM. still CPU on corsair water benching past 1400 now 7-10-7. Rig got a bit unstable so can revisit, also got cas6 to start training as well. Gotta find out how high it will go.
http://img194.imageshack.us/img194/4145/d1m5.jpg
http://img208.imageshack.us/img208/1074/e7a4.jpg
http://img202.imageshack.us/img202/8647/qgqo.jpg
http://img23.imageshack.us/img23/2434/yc4a.jpg
Love that Pic dino ^^
So had a go at 5ghz tonight second time cold memorys on this board,still trying to dial myself into board and haswell,not quite sure if I turned all power saving stuff off in bios,will keep testing .Need to sort a ram disk out this final loop is not good and maybe waza but its a start
bullant - 5:56.625 - 49x102.7 - 1361MHz - 6-10-6-24-70-1 - OCF - GSkill Pis 2x2GB/PSC - 2.15V -CPU-25,Memory Ln2 -120
http://s22.postimg.org/pcr3mq6j5/bnm.png
Dino try 7-11-7 :)
Nice run bulllly
this should pass man :). 7-11-7 does but its a bit slower
playing around a bit XD
tWCL 5?
http://i.imgur.com/yTYLeEf.jpg
the dank 2800 no wz time
http://i.imgur.com/HHirqaX.jpg
proper run tonight or tomorrow, got wet.
Fosco - 7:25:219 - 40x100 - 1333MHz 8-12-8-31-110-1 - GIGABYTE Z87X-OC - 2x2GB GSkill Flare (PSC) - 1.9550v - H2O/Air
http://i.imgur.com/0ySKyKN.jpg
230L delivered on friday :D
Some fun with little asrocker and some samsungs. Cold didn't really help much, just made it easier to do what I was already doing on air. Couldn't get more frequency, but helped stabilize what I was doing.
4ghz
Mikecdm - 7:19:860 - 39x102.55 - 1435.7MHz - 9-12-12-15-108-1 - Asrock Z87M OC Formula - G.Skill 2600c10 2x4GB/Samsung HCH9 - 2.22v - SS/DICE
http://i.imgur.com/lXStzkv.jpg
5ghz
Mikecdm - 5:58:046 - 49x102.07 - 1428.9MHz - 9-12-12-15-108-1 - Asrock Z87M OC Formula - G.Skill 2600c10 2x4GB/Samsung HCH9 - 2.22v - SS/DICE
http://i.imgur.com/xxAgd38.jpg
Mike killing it with the Sammies!
tRAS 15
http://i.imgur.com/7Rh4SLT.gif
Rosty - 5:57:547 - 50x100.00 - 1466.8MHz - 9-12-12-19-108-1 - OCF-M - Corsair Platinium 2400 c9 2x4GB/Samsung - 2.09v - SS/SS
http://i1014.photobucket.com/albums/.../screen036.jpg
thanks to Splave for that nice RTL-IO guide :)
^ 2400 Platinum ownage :clap:
bought a cheap dewar on Craigslist and came home with some Dice, hows that work. Here's a 5ghz run. I did a 4ghz run at the very end and it shut down on me running aida. I think these rams need more cold.
Mikecdm - 5:57:344 - 50x100.06 - 1335.7MHz - 7-11-6-24-70-1 - Asrock Z87M OC Formula - G.Skill Pi 2200 c7 2x2gb/psc- 2.15v - SS/DICE -55
http://i.imgur.com/QCTcgVt.jpg
Was messing with phone settings, here's a pic.
http://i.imgur.com/YzMPdKm.jpg
Awesome run Mike:up:
This is all I have to say Mike. . .
http://i.imgur.com/bPmFUmf.gif