Printable View
Good info thanks. I dont think many ppl realize this and shoot for 100 x 50 or similar like they have been doing on SB-E and as a result have to use more vcore. Ive been running 132 all along but that was just out of luck bc it was what I needed for mem optimization.
Quote:
Originally Posted by Raja@ASUS
Once you strap the cpu to other than 100, the cpu stops giving SVID commands to controller. So there cannot be 'dynamic VID' . Its Intel's way and characteristic of SNBE
Guys, i need your advice here. I bought a RIVE BF3 edition on december from Newegg, and it arrived to my country last week (i was waiting for other parts), but there is no BF3 code inside :(. What should i do? Contact Asus or Newegg? Both?
Drop me a PM as you are NA based, I will need a photo or scan of your Newegg invoice plus your serial number and I will ask the CS team to sort a key for you.Quote:
Originally Posted by AndresR
-Raja
Guys, can someone uplaod last OC key firmware? From FTP I can not it download. thx :)
sup guys im new to this thread, i'll be getting the RIVE soon to fullfill my 6 core dream :)
i've been reading all the thread and why is it that 100x50 is harder than more bclk + low multi ? i read that 100x50 need more volts than 129x39 for ex, its the dif from SB now blck can be increased, so theres more perfomance gains ? or 100x50 still faster than 129x39
sorry maybe i will start shooting stoopid questions
cheers to all
Sergio
See for a possible reason: http://www.xtremesystems.org/forums/...=1#post5036365
nice testings there i have that exact RAMQuote:
Originally Posted by OC Nub
what is the aida bandw at 5Ghz HT with 2400 CL11 ?
cheers
Sergio
yes, very nice chip. Did u tested max multi load?:)
Thanks!Quote:
Originally Posted by andressergio
Im not sure exactly. I went back to s1155 for a couple days to try old benches, but Ill test this weekend and let you know.
Welcome to the thread, and Congrats on the new rig!
Not yet. Maybe in the next few days :)Quote:
Originally Posted by FlanK3r
thanks OC nub i dont have it yet, mobo will arrive in 15 days i guess and chip im waiting new stepping to pull the trigger, the other parts i have themQuote:
Originally Posted by OC Nub
thanks i wait forward for your results
Sergio
Still learning a lot of this mainboard, but what do you guys think of my current settings, should i lower the VVT or VCCSA?
http://img38.imageshack.us/img38/7646/captureyzj.jpg
I'm using similar settings with 32GB for 24/7 and I found that I don't need more than 1.15 VTT and VCCSA at 2400MHz, I also dropped PLL to 1.7. If you have 2133 Z, you should be able to run it comfortably at 2400 if you slightly loosen the first timings without having to increase voltage beyond 1.6.Quote:
Originally Posted by AndresR
Thanks, i'll give it a try.Quote:
Originally Posted by s4pphire
waiting for my board to come back from rma..... 5 days life, and K.o. :|
new 0006b bios
http://www.mediafire.com/?1332uzr1eaq6ppc
better than 1005 in your opinion?Quote:
Originally Posted by LardArse
on par at least i think
cant wait to join the club :)
hello that is with you so
So my boot time to the beep
So switch on the power supply (standby)
33.2 sec
Normally off completely
39.2 sec
also did you ever?
Hi guys, I have some time to test this supreme board and I made (i hope) cool video tribute for this MB. I hope that you will like it!
http://www.abload.de/img/videofq61p.png
Aircooling results (Noctua NH-D14)
SuperPI 1M: 7.301s @ 5200 MHz
http://www.abload.de/thumb/superpi1m50k13.png
SuperPI 32M: 7m 14.867s @ 5100 MHz
http://www.abload.de/thumb/superpi32m7jj2o.png
Hexus PiFast: 14.51s @ 5150 MHz
http://www.abload.de/thumb/hexusrzjks.png
wPrime 32M: 3.386s @ 5100 MHz
http://www.abload.de/thumb/wprime_32m98jj6.png
wPrime 1024M: 103.957s @ 5000 MHz
http://www.abload.de/thumb/wprime_1024mdrk46.png
Cinebench R10 x64: 45639 @ 5075 MHz
http://www.abload.de/thumb/r1097j7b.png
Cinebench R11.5 x64: 14.64 @ 5050 MHz
http://www.abload.de/thumb/r11k4jhe.png
Friends, as you have set the PCI Express I am trying to setup 3 way sli, but grabs. I've tried various combinations and do not grab 3 wa sli, Place 1-3-5 VGA ports.
http://img844.imageshack.us/img844/6...garrar3way.jpg
very nice mate i hope i can get a decent chip like thatQuote:
Originally Posted by froxic
grats
Sergio