Printable View
I also think that L042B076 it's a go for it!
My 1st L042B076
5.0Ghz with 1.424v not bad :P
http://img830.imageshack.us/img830/9787/5000933.jpg
But the 2nd one is the best:
1.424v set on bios ( vCore jumping from 1.416~1.432v )
http://img535.imageshack.us/img535/373/510025.jpg
much lower GFlops on the 2nd.
800 vs 933 mem freq vs Linx in 4threads vs Linx in 8threads.Quote:
Originally Posted by wekktor
Motherboard Gigabyte GA-P67A-UD7
RAM Speed : 1071.3 MHz (1:8) @ 7-7-7-20 (2144MHz)
http://valid.canardpc.com/cache/screenshot/1628075.png
Validated by CPU-Z 1.56.2
:D
WPrime 1024 mil stable.
http://img163.imageshack.us/img163/3...0109225256.png
Nice result is it prime stable!Quote:
Originally Posted by 1Day
I'm impressed.:up:Quote:
Originally Posted by 1Day
This is not mine but it deserves some attention:
http://s43.radikal.ru/i102/1101/58/15ccc7572213.jpg
DIGI+ VRM
Load-line Calibration - High
VRM Frequency - Manual
VRM Fixed Frequency Mode - 480
Phase Control - Extreme
Duty Control - Extreme
CPU Current Capability - 140%
CPU Voltage - Manual Mode
CPU Manual Voltage - 1.38
DRAM Voltage - 1.65 (depends om memory
VCCSA Voltage - Auto
VCCIO Voltage - 1.05
CPU PLL Voltage - 1.90
PCH Voltage - 1.05
CPU Spread Spectrum - Disabled
CPU Power Management
CPU Ratio - Auto
Enhanced Intel SpeedStep Technology - Enabled
Turbo Mode - Enabled
Turbo Ratio - Maximum Turbo Ratio settings in OS
Maximum Turbo Ratio settings in OS - 50
Turbo Mode Parameters
All Auto
Advanced/CPU Configuration
CPU Ratio - Auto
Intel Adaptive Thermal Monitor - Disabled
Active Processor Cores - All
Limit CPUID Maximum - Disabled
Execut Disable Bit - Enabled
Intel Virtualization Technology - Disabled
Enhanced Intel SpeedStep Technology - Enabled
Turbo Mode - Enabled
CPU C1E - Disabled
CPU C3 Report - Disabled
CPU C6 Report - Disabled
Mobo Asus P8P67PRO
2x2ГБ DDR3 Kingston Hyper X KHX2133C9AD3T1K2/4GX (PC17000, 2133МГц, CL9)
very nice 1Day !, batch# ?
hey stoned is your EPU disabled ?Quote:
Originally Posted by st0ned
That's the overcurrent protection right ? I'm not sure, why ?Quote:
Originally Posted by coolhandluke41
:D As you know I do not do stable. :yepp:Quote:
Originally Posted by bro20000
If I can bench at those frequencies then that is all I ask from a CPU. Stable as in prime95 or what ever the current flavour of the month is has no relevance for my needs.
I do think it is important to those whom it matters to.
In many ways I sort of see it like a kind of benching but instead of points for scores it is how long at what frequency. So I respect those who practice stability testing but it is not what I am into. :)
5.7 for wprime 1024 is very nice :up: What batch chips you have ?
:up::)Batch FTW ???? and what cooling u use ln2 not air i think... do u run any superpi 1M or 32MQuote:
Originally Posted by 1Day
I booted into OS at 5.7GHz on air. But to bench Wprime and Super Pi 32 I have used water. My husband bought me a SS yesterday so that is what I will use in the future.Quote:
Originally Posted by PytonOrm
Re Batch : L040B307
:yepp:Nice same batch has mine! I will try for 3.7 to when my new hardware comes!Quote:
Originally Posted by 1Day
nice work. did you use a 56x multi or a lower multi and bclk?Quote:
Originally Posted by 1Day
57x Multi. And to be brutally honest it was very little my work and all the CPU.Quote:
Originally Posted by jackbrennan2008
http://img717.imageshack.us/img717/6698/cpus.png
I got these on Friday. :p:
My first one had a wall at 5.4GHz so :shakes:
1Day
:up: Awesome work !!! nice only 4 pcs of 2600K thats nuts :woot:
1day - awesome cpu, is that the highest ever for a 2600K ?
st0ned - very nice , hit them for max clocks please.
Guys do we have a discussion here on what rams to get for these?
:up:
Quote:
Originally Posted by aussie-revhead
No there are six others that have clocked higher. :) Not sure if they clocked with HT on and all cores enabled like I do. But higher they have clocked. I bench so I am not really going to get any HWBOT points for CPU-z with a Sandybridge. Not when 8GHz plus is what you have to beat.
Ram is a difficult one. I have had amazing results (better than expected) with some Giel Evo Two sticks I bought for the P55 boards last year. 2000MHz Cas6 - 9 - 6 doing 2133 at Cas 6 with ease. The only discussion I saw was working out why Hypers are not clocking on the SB boards. But with my GA-P57A-UD7 board I have not had any hassle as you can see with Hypers. I wonder if it is board related. You know how the bios sets the latencies of the ram. But I have no real idea.
I meant is that the highest multi for a 2600K.
The faster ones on hwbot are not far ahead of yours, good work. Only one of those 6 is on 57x multi too.
http://www.hwbot.org/searchResults.d...peId=&offset=0
:up:
Good job 1Day, :up: keep doing what you do best :)
Running on air cooling Venomous X 2 fans.
i7-2600k Batch L041C108.
Asus P8P67 motherboard.
5ghz LinX takes 1.4-1.41v to be stable but hits 89C!
So for 24/7 use I'm gonna stick to 4.9ghz 1.36v set in bios:
http://i246.photobucket.com/albums/g...9/Capture3.jpg
Nice Laguna, try benching at higher clocks without LinX torture? It would be good to see its highest possible multi.
:)
Yeah my venemous-X with just one fan gets up to 90C in small FFT prime, with 5 ghz and 1.45v load going through the thing.
And TRUE black with Ven-X mount fares even worse, even though the mount is so secure with the TRUE that it doesn't swivel one bit...(the Ven-X swivels but temps are lower).
Even a 190cfm Delta won't help, because it reaches 80C within 5 seconds...