Printable View
How does one go about finding out all the internal measurements of a case?
Taking a ruler to a case seems exceedingly difficult :P
Have wondered this in the past.
And how do you fabricate it?
There's only so much a CNC mill can do. How do you do metal folds for strength etc...
Custom case sounds really fun ^^ But it seems impossible to do without some complex processes.
Sorry if this has been asked or something within the last 21 pages...
Quote:
Originally Posted by DeltZ
Deltz, often times you can find components people have made to spec in google sketchup. You import those components such as a mobo, psu's, rads, etc. and build around them. Adding other components as you go along. Cases can be as small as the components allow or as big as you want them to be. I don't work with metal yet and specialize in acrylic, so I can't help you there.
Taking a ruler to all components is what I have had to do over the past 6 months to get the excact spec's for components (H x L x W plus mounting hole distances). I've uploaded a few onto google sketchup's warehouse under Gone Cruising. You finr hundreds of others.
Google sketchup is perfect software to start your designs and it's free!!!
It looks great keep up the good work.
Let us know who's holding things up and we'll bombard them with emails, phone calls, etc, until they get with the program and make your case for us!!Quote:
Originally Posted by Mick64
:D
Hy all ,
I have been reading this post for about 2 h now going through every comment and every picture posted , it looks :up: it's my dream case .
Hope I see it in stores till the end of the year. Mick64 good luck and lots of money and health.
IF you build it i will buy it. I promise. When you build this Please send me an email and a PM. I will pay a premium. I must have this case.
<joke>Damn, $2,499 what a bargain!</joke>
Wow! thats looking really good!Quote:
Originally Posted by Gone Cruising
@Mick64 I apologize if this has been asked or mentioned before, but I ran into this problem recently and I noticed it here: The areas for the rads appear to be tight for 12omm fans, is or was there consideration made for rads larger than 120mm? I think my BI Gtx's are 135mm and it caused me some issues in my case(dremel ftw!).
Hi mick,
I love the case your building and I might have to buy it! My only concern is for power issues with the sr-2. I noticed you had a 200mm depth for the power supply. The best 1500 watt that I could find was 220mm in depth. The best that would fit would be the antec 1200. Only it would not be enough power for 3 high vid cards with 2 gulftowns not even overclocked. So I was thinking is it possible to make the upper loop 3 fans wide with another power supply up there. Without an extra power supply you wouldnt get high temps anyways so would'nt 4 fans wide not be necessay for that loop. Just some thoughts I figured I would send your way. I would hate to have to go with one of those bay power supply boosters or extend the power supply out of the case a few inches. Granted you wouldnt be able to set any world records due to heat restrictions but this would give the flexability of being able to really use all the features of the board.
Any news on this absolutely stunning case? It would be a dream come true if we could buy it even if it's not cheap - but one does not have to upgrade the case any more :)
Good point. I suspect many will want to use a 1500W PSU with this case.Quote:
Originally Posted by scottbenson8
Speaking about different PSU options IIRC there was one made by koolance 1700W watercooled PSU aswell. Not long time ago somewhere here (don't recall though in which thread) i seen even url to a bit differently planned 2000W PSU (as in not overly long, but double height).
Koolance PSU-1300ATX-12N: (1300/1700w)
http://www.koolance.com/product_arch...product_id=665
Apparently no longer available, but it would have been a really nice PSU to use in a water cooling build, especially the pre-1.5 revision, which had a side window.
Hey buddy,
I wonder how you got on with working out costs for this case? It is an interesting project and a very nice design. After I finish my Lian Li I am looking to offer computer cases. Having a look at the designs I can say that unless you mass produce that case its going to be damn expensive. If your making them to sell your going to have to make 100% on the cost to you to make it worth while and you are going to have to get at least a dozen made to make it cheap. I can estimate that the material costs alone for the lasered parts would surpass £100 ea case in quantities of 5 or so.
Take a look at how expensive mountain mods cases are and also note that they are incredibly simplistic.
Let me know you get on as I'm genuinely interested.
Mudgey
hello, first of all I want to say I am pretty new on this forum. I have been following your treath for a while now and I took the liberty to make some solidworks drawings for it. if you are intrested feel free to pm me. I am working on the MB tray atm but I dont have sizes of the SR2 so thats kinda hard.
I must say it looks more like the plexiglass case of Gone Cruising.
Yeah, they are pretty much the same design. It's hard to not go with this type of design when dealing with a full tower as almost all components will go into the case in the same areas. My acrylic case is going through a re-design and have stopped working on the current one until the new design is finished. I got rid of the aluminum frame and went with an acrylic one and will be making two versions. one for ATX and EATX and one for the 4 way and SR2 mobo's.
They did grow in height as well 30" tall and 32" tall. Bothe are still 12" wide and 24" deep.
Just to let you know, progress is being made. As I said in previous posts, there is a company working on my case design, but they were busy with other projects. They are now concentrating on my design, but it is a lengthy process.
I am expecting to see some 'solid' results in the next couple of weeks and as soon as I have something to show you I will post them here.
I know things have been quiet of late but I have had a lot of things to deal with in my home and work life which has left me no free time to indulge in my hobbies.....
Thats fantastic Mick!!!!! Can't wait to see the results!!!! Your going to have yourself one giant seller!!!!
I'm excited for you Mick! And excited to see it completed! Good luck in your endeavour!!Quote:
Originally Posted by Mick64
This is by far the nicest case I have ever seen!
I hope that Silverstone have bought the rights to produce this, and aim to preview it at Computex in June!
Simply stunning work, so stunning that I refuse to buy another case until this is relased.
Nice work Mick !
And keep on hanging in there - one of this days I can finaly buy it :)
i love to build this or buy it on the market what can i do to get this case do you have a file that has spec's and deminsion's so i can start working on this case? also have you asked corsair or somone else to manufact it for you?
I wanted to mention again that your patience and wisdom in this project has been amazing. True, your sparkling eye for design has contributed greatly to the success and brilliance of your chassis—but making changes based on the input of potential (and educated) users is what makes this chassis, dare I say, epic.
Now I have my two cents to throw in. If you are indeed having your chassis manufactured (good for you—and us) then perhaps I can suggest that you offer a bare metal version. I’m not sure if you decided against steel, but I am sure than many of your potential customers, including me, all have different thoughts on color schemes.
If it’s aluminum, I would like to splash anodize it myself, and if its steel—well, then hundreds of power coat combinations await…
I’m sure there are a few people willing to pay the price (let’s be realistic, I have had custom cases built by Lian Li before—it’s going to be expensive) who would leave the chassis untouched, but I am willing to bet that those coughing up the serious cash for this amazing chassis are going to want to personalize it with a different paintjob (or metal surfacing) anyways…
Just something to think about that could lower the price of production and play to your market a lil’
Thank you again for your amazing work. Good luck, and I hope you turn a tidy profit. You deserve it—you listened to your target market. ;)
NFC: one unpainted (read: cheaper) case might be good idea, but imho base model should be pre-powder-coated in some popular color (probably black), as another characteristic of this case is - finally one which you don't need to mod at all to fit lot of LC components in it. So part of buyers might be just that - ones not wanting to mod/paint/do something extra.