Damn - your neck hast to hurt after looking up at that screen for an hour or 2...
Quote:
Originally Posted by cyrixMII300
Printable View
Damn - your neck hast to hurt after looking up at that screen for an hour or 2...
Quote:
Originally Posted by cyrixMII300
Buy a sleeving kit! you can do it!Quote:
Originally Posted by day187
@ Jsunn...
Wohhhhhhhhhhhhhhhhhhhhhhhhhhh *no cmoment* haha nahhh. Why does this seem like MDPC worthy? You reckon you can post more pictures because I really like it!
@Jsunn: what kind of fan filters are those? i can't seem to find them over FrozenCPU
Here is the link to the fan filters...
http://www.frozencpu.com/products/26...tl=g36c223s548
I am actually impressed with them as they do a pretty good job at filtering the massive amount of dust my dog brings with her. :D They also don't seem to retrict flow that much either.
Thanks for the comments about the case. I will be posting more pics in the link in my signature.
-Jason
Here's my 24/7 setup.
E4300 @ 3.2ghz (Noctua NH-U12F + 120mm Nexus @5v)
OCZ Platinum XTC rev.2 PC2-6400 2X1GB (TT Spirit RS)
Asus P5N-E SLI (TR HR-05 SLI + 80mm @ 5v, Enzotech CNB-S1L)
EVGA 8800gts 320mb (TR HR-03 PLUS + 120mm Yate Loon @ 5v)
Samsung 1tb F1 HD103UJ (140mm Xion @ 5v)
Corsair HX520 (120mm Yate Loon @ 7v)
X-FI Music
http://img402.imageshack.us/img402/9489/1mediumer3.jpg
http://img254.imageshack.us/img254/1153/2mediumtx1.jpg
http://img254.imageshack.us/img254/6716/3mediumvn2.jpg
http://img403.imageshack.us/img403/5881/4mediumph2.jpg
I also ordered the HR-11.... I actually don't think it'll fit, but I guess I'll find out in a couple days :hitself:
Is it just me or is the GPU cooler taking up 5 slots?
I think it's 6 :eek:
xD Thermalright HR-03 + fan. The cooler can be mounted the other way so that the heatsink is above the gpu instead.Quote:
Originally Posted by NetburstXE
indeed, but....Quote:
Originally Posted by NetburstXE
DAMN man, it's so neat and clean!!!!!!!
congrats!!!!!!!!!!
does those dampening kits hinder thermal performance?
Yeah, takes up 4 pci slots with the fan. It's ok with me though since I only need my sound card.Quote:
Originally Posted by NetburstXE
Thanks :up:Quote:
Originally Posted by miptzi
Not really sure tbh... never did a comparison with it and without. I'd think it'd add a couple of degrees though :shrug:Quote:
Originally Posted by emoners
if you have air flow, i would think it makes almost no difference.Quote:
Originally Posted by emoners
Very nice setup Prospect
http://farm3.static.flickr.com/2138/...748b2264_o.jpg
http://farm3.static.flickr.com/2417/...b3427782_o.jpg
http://farm3.static.flickr.com/2169/...2b51edc2_o.jpg
One new addition. It now has a ThermalTake 600W modular PSU.
very tidy :)
I like it how the copper colour and red looks together :D
http://img229.imageshack.us/img229/1885/41818703zq5.jpg
http://img216.imageshack.us/img216/6752/70797680su4.jpg
http://img229.imageshack.us/img229/5636/75745037dg6.jpg
http://i247.photobucket.com/albums/g.../Imagen051.jpg
http://img216.imageshack.us/img216/4792/54947804ti4.jpg
http://img229.imageshack.us/img229/9020/52976493se0.jpg
Very nice setups batmang and manyga :up:
Good job with the wiring Manyga.
Tommy, that is a very nice case, do you have any other pictures of it?
I also think the pictures are very high quality, what camera do you use?
-Jan
heres mine
i took out the stuff inside coz im ocing my q6600 and i reseated my HSF
http://i90.photobucket.com/albums/k2...nom/690002.jpg
More pics will come next week when my new mobo is hereQuote:
Originally Posted by YanBooth
Cam are an EOS 400D and a Fuji S6500fd ;)
dranom Very nice case :up: I like:cool:
Tommy's at it again with the camera :D Very nice pics as always :up:
Haha, agreed! Great pics!Quote:
Originally Posted by en4cer
Nice case too :up:
BTW, I see a grand or baby grand piano in that second pic... do you play??
I love the piano, been playing for almost 8 years now. :D
My mother's playing it ;)Quote:
Originally Posted by smee
My case, with black panting!
http://i26.photobucket.com/albums/c1...01676Large.jpg
http://i26.photobucket.com/albums/c1...01687Large.jpg
http://i26.photobucket.com/albums/c1...01690Large.jpg
http://i26.photobucket.com/albums/c1...01696Large.jpg
http://i26.photobucket.com/albums/c1...01694Large.jpg
http://i26.photobucket.com/albums/c1...n/IMG_2365.jpg
http://i26.photobucket.com/albums/c1...n/IMG_2357.jpg
http://i26.photobucket.com/albums/c1...n/IMG_2355.jpg
su3_zero - Why are you using the stock Intel heatsink? Other than that, looks good. I really like the black paint job :up:
[XC] NetburstXE - I'll change heatsink soon... thanks, i love black paint too
more pictures
http://i26.photobucket.com/albums/c1...n/IMG_2456.jpg
http://i26.photobucket.com/albums/c1...01957Large.jpg
http://i26.photobucket.com/albums/c1...01954Large.jpg
Nice looking rig there su3_zero :up:
Thanks...Quote:
Originally Posted by RealRedRaider
i need to save money to buy the new heatsink... here pc products is now so cheap... CM hyper TX2 cost R$100,00 = U$ 170,00
box heatsink is doing the job for now..
thksQuote:
Originally Posted by elpibe10
What kind of temps are you getting with the stock heatsink?
33 idle / 52 full @ 3.2GhzQuote:
Originally Posted by [XC] NetburstXE
the heatsink is lapped and i'm using AS ceramique.
Not at all bad :yepp:Quote:
Originally Posted by su3_zero
su3_zero is that real carbon fiber?
Looks like tape, you can see it around the edges and also some minor bumps along the way.
I actually rather like the idea of having a fan at the front of the case like that.
specs in sig for my main rig.
main rig pics
http://i76.photobucket.com/albums/j1...ut/rigshot.jpg
rd 600 on evga northbridge,yes it fits almost purfectly(lil reaming of holes).but the nf200 northbridge baby chip has a copper ramsink on it with sunon 40mm blasting it.
http://i76.photobucket.com/albums/j1...00nbon750i.jpg
my baby
http://i76.photobucket.com/albums/j1...t/rigshot2.jpg
my custom stainless steel\plexiglass watercooling housing unit,serverd my well for over 4 years now :p
swiftech p655 big pump,all 1\2 tygon r360 tubing,triple 120mm rad,danger den rd600 block on evga 750i northbridge,danger den cpu block.
back of case(radiater inside,fans pulling.like my tig welding?lol :o.im a percesion pharmacutical welder.its 16gauge stainless steel type 304,holds my pc on top of it easily..
http://i76.photobucket.com/albums/j11/bf2nut/rad-1.jpg
--a true gaming setup----
8800gtx going to 22in mitishibishi diamdtron 2048x1536 res.killer sound putting it mildly.but i prefer headphone mode into my senhieser hd-570,s getting fed 100watt x2 clean power threw xfi.the onkyo amp and technics speakers are when i rock out some music.the klipsch ultras are nice also with its 500 watt amp, 5.1 speakers,dual 8in subs...
http://i76.photobucket.com/albums/j1...t/gotsound.jpg
my main rig specs..
http://i76.photobucket.com/albums/j1...rigspecs08.jpg
over 2,300 watts of power im playing with,ha..
http://i76.photobucket.com/albums/j1...t/gotpower.jpg
http://i76.photobucket.com/albums/j11/bf2nut/e8400.jpg
onkyo amp,2 12 technics speakers,and aux sound is klipsch ultras speakers,xfi card ..senheiser hd-570 cans $1,200 in sound...
http://i76.photobucket.com/albums/j11/bf2nut/desk.jpg
my beater pc specs are asus p5k-se, my old e6600,enzotech cooler(works amazing!)3.2 ghz at 1.38 volts 25c,2 gigs cell shock ddr1000 @ ddr800 4-4-4-12 1t,pc power cooling 610,7800gt,dvd sata,seagte 7200.10 80 gig,21in sony trinitron,mx-500,xtrac ripper xl pad..... flys for a beater
http://i76.photobucket.com/albums/j1...t/beaterpc.jpg
http://i76.photobucket.com/albums/j1...terpc2shot.jpg
still a WIP...needs moar fans and maybe lights behind motherboard tray side of case:rolleyes:
lol at the blue heatsinks on the 8800GTS,
I'm surprised people aren't putting heatsinks on their heatsinks more often. :p:
they got given to me so i thought i'd given them a go. LOL i don't know if they do anything. Probably make it hotter.Quote:
Originally Posted by biftek.
Quote:
Originally Posted by illidan
it's a tape... i'll change the tape, because of the bumps.Quote:
Originally Posted by inCore
What do you use to paint the mesh on the stacker? The mesh on the Drive bays
Me?Quote:
Originally Posted by Pending
just in case it's me ur asking:
http://img169.imageshack.us/img169/1...ilnbqd5.th.jpg
http://img169.imageshack.us/img169/7...ivvdar0.th.jpg
two coats primer
sanding 320 grit
two coats red
little sanding 320
two coats clear sealer....
still waiting for wife to sleep to use oven or leave in the back of my car on a hot sunny day. :D...I gots lots of car airfreshener on stanby :rofl:
How would more surface are to dissipate heat over possibly make the object producing heat hotter?Quote:
Originally Posted by Bertross
Quote:
Originally Posted by Cpl Ledanek
still waiting for wife to sleep to use oven or leave in the back of my car on a hot sunny day. :D...I gots lots of car airfreshener on stanby :rofl:[/QUOTE
bad move:rolleyes: the paint fumes with litteraly attach to your interior,smell forever..
place some aluminin foil on a table\chair etc and place your screen on that during sunny hot day,work flawless.sun will hit it all over even underneath;).
and as far as the oven theory goes,max 200 degrees for 30min or so.any hotter then u might possibly warp the screen from excessive heat.thinking 400-500 will warp it,its only 18 gauge material plus its carbon steel(flexes easier).if it was stainless steel it could take more heat.
i was only joking. Actually i found the places i put the heatsinks the hottest on the card without looking at the core. I think it's made about 1 degree difference. When the fans blow air on it they do do the job well i guess.Quote:
Originally Posted by [XC] NetburstXE
The good ting about those heatsinks is that they stay cold compared to the actual GPU heatsink.
That should be a sticky :up:...my car owes you one :up:Quote:
Originally Posted by railmeat
My little contribution.
http://img379.imageshack.us/img379/1446/img0604nj7.jpg
Not the cleanest looking around but does the job for me.
surrealX, it looks like you have a ton of dust in your heatsink :down:
It's look like a dust filter :rofl:Quote:
Originally Posted by [XC] NetburstXE
Hey all,
This is my first post, and I must say that I enjoy looking through all of the rigs here. So here's mine:
[IMG]http://img178.imageshack.us/img178/9...1916rn7.th.jpg[/IMG]
http://img229.imageshack.us/img229/2...1917ea8.th.jpg
qx9650 TRU120E
EVga790i
9800gx2 qsli
WD raptor 150 raid0
pp&c 1200
lian li pc-p80
My Spinner case Mod :up:
http://img.photobucket.com/albums/v6...ase400x500.jpg
A small video :rofl:
http://img.photobucket.com/albums/v6...h_08446875.jpg
I LOVE that red paint job, THRASHER2! That spinner idea is pretty cool, and all that red compliments the chrome real well.
What motherboard is that Thrasher?
I've never seen a White PCB mobo before :p:
You should paint the drive bay cover and Lian Li Accessories too.
Looks like a Sapphire board.
Wow ! That's a really unique case. Excellent work, dude :up:Quote:
Originally Posted by THRASHER2
something like this :)Quote:
Originally Posted by biftek.
http://img88.imageshack.us/img88/1722/saphirezy5.jpg
What in the name of is THAT?Quote:
Originally Posted by illidan
I Like the Lian Li PC80:shocked:Quote:
Originally Posted by combray7494
Very beautiful:clap:
cool
Very possibly the ugliest motherboard I have ever seen :down:Quote:
Originally Posted by s0lid
WOW ! :shocked: This looks fantastic :up:Quote:
Originally Posted by illidan
Anyone knows what board is it ?
Quote:
Originally Posted by elpibe10
Thats the sapphire PUREinnovation s939 board from a while back ;)
pls open case fotoQuote:
Originally Posted by combray7494
Thanks ... so it's an oldie.Quote:
Originally Posted by en4cer
A pity Sapphire stopped making their own boards nowadays. They're mostly OEMed from DFI or Jetway. :(
http://i7.photobucket.com/albums/y26...p/IMG_1397.jpg
Noctua NH-U9 due in tomorrow.
some nice setup's here
my pc has to share the room with my weights bench. i'll have to pull my finger out and take a pic. i said that a while ago too and still havent done it :confused:
Nice setup cabbspapp
Thanks!
http://img519.imageshack.us/img519/1407/antec07vw7.jpg
My new Thermalright Ultra 120 Extreme
http://img186.imageshack.us/img186/9...2874vt9.th.jpg
http://img337.imageshack.us/img337/4...2876zb0.th.jpg
http://img170.imageshack.us/img170/5...2873rb5.th.jpg
http://img261.imageshack.us/img261/9...2877ag3.th.jpg
http://img261.imageshack.us/img261/1...2872ob8.th.jpg
http://img246.imageshack.us/img246/4...2871me9.th.jpg
http://img337.imageshack.us/img337/3...2869cw4.th.jpg
http://img293.imageshack.us/img293/9...2868cg8.th.jpg
http://img293.imageshack.us/img293/6...2863xn7.th.jpg
heres my rig in a 900. just did a watercooling upgrade.
http://i200.photobucket.com/albums/a...DSC00368-1.jpg
http://i200.photobucket.com/albums/a...DSC00365-1.jpg
PA120.3 mounted off the back of the case.
cable management could be better, but this works for me.
Looking at getting a TJ07, lian-li a77, or v2010.
thx
http://img90.imageshack.us/img90/402...704ajd7.th.jpghttp://img231.imageshack.us/img231/7...9110od9.th.jpghttp://img231.imageshack.us/img231/4...73aeok6.th.jpghttp://img223.imageshack.us/img223/1...f52coe4.th.jpg
http://img229.imageshack.us/img229/3...a3c4pf3.th.jpghttp://img229.imageshack.us/img229/6...1ba8ax7.th.jpghttp://img217.imageshack.us/img217/6...56c7lc0.th.jpghttp://img217.imageshack.us/img217/8...2817io4.th.jpg
http://img219.imageshack.us/img219/2...7b58oy5.th.jpg
That is a nice setup, but it looks like the tubing runs could be a bit shorter.
They really had to be about how they are in order for the tubing in the back not to kink at the reservior. I'm sure I could have shaved a few inches off, but I like the way it looks :shrug:Quote:
Originally Posted by MINIz guy
Beautiful rig Reaper. Love the green in the tubes. It is just right.
Thanks Voo Doo.
I used feser view uv green dye here.
i used about half a bottle (25ml) til i got the desired color i wanted.
Hey, you don''t happen to play EVE Online, do you?Quote:
Originally Posted by The[R]eaper
sorry i dont, mostly bf2142 and hellgate
Very nice Alien Green :up:Quote:
Originally Posted by The[R]eaper
please dont comment on how poor the rad job is lol
http://img185.imageshack.us/img185/3886/dsc00052xv7.jpg
Then you have a doppleganger that lives in Longview, goes by variations of the name "Reaper" and that plays EVE.Quote:
Originally Posted by The[R]eaper
Funny.
wow thats funny
VERY NICE WORK!!!Quote:
Originally Posted by The[R]eaper
i would remove the car radiater hose clamps tho.they do eventually dig into the soft tygon tubing and create pressure leaks.zip clamps works flawlessly(like on your cpu) and also give a clean look.dude u did a AMAZING job.:up: flawless job,shame only a few guys here make them that neat,again VERY nice work.do it once, do it right.
any c1 errors with that dfi yet?,hangs etc?
New mobo: DFI LP Dark P35 T2RS
http://img508.imageshack.us/img508/1656/img0709wq8.jpg
http://img253.imageshack.us/img253/5520/img0711iq7.jpg
http://img219.imageshack.us/img219/2451/img0735kr3.jpg
http://img58.imageshack.us/img58/1227/img0728jx7.jpg
http://img230.imageshack.us/img230/1258/img0731rl8.jpg
http://img229.imageshack.us/img229/1217/img0738rc3.jpg
....and I tought I'd never see a TT SOnic Tower in real Use......
almost got one last year..........
Actually i am bored of it...thinking of going with water,just some few houndred $$ missing :rofl:
Hello! Here is my Lian Li Armorsuit series, it's still a work-in-progress as I still have to sleeve and hide some wires so I'll probably post some pictures later on! To tell you the truth I absolutely hate LEDs since I can't sleep with them on in my room, so I'm planning on purchase one black 140mm fan and five 120mm files.
http://img522.imageshack.us/img522/9...0052908hb8.png
http://img90.imageshack.us/img90/358...2052908ym0.png
http://img153.imageshack.us/img153/1...4052908uj8.png
http://img91.imageshack.us/img91/768...5052908bp0.png
My goal is not to have one of the fastest or one of the most powerful home-made pcs out there...but to hide as much wires as I can leaving it a clean look. I'm inspired by all the people with hella nice cable managements! You guys rock.
@P4rD0nM3 - Awesome setup!
@ alexey :
What's your temps with the HR-03 in this position (i presume you bend it), i'm thinking to do the same thing to mine but not sure if this will impact the performance or not.
Less grainy pic.
http://i7.photobucket.com/albums/y26...p/IMG_1456.jpg
Damm i liked :clap:Quote:
Originally Posted by P4rD0nM3