The San Diego OC DISCUSSION Thread

Printable View

Show 100 post(s) from this thread on one page

06-07-2005, 05:52 PM
Colin

http://members.lycos.co.uk/csmo/Comp...700/piFast.gif

http://members.lycos.co.uk/csmo/Comp...uperPi_All.gif

I noticed that I cannot clock my memory as high with the 3700+ compared to the CAA2C 3500+, did you guys notice the same thing? My Mushkin memory can do around 260 @ 1.5-2-2-5 with the 3500+ but can only do 246 with the 3700+. :(
06-07-2005, 10:30 PM
mrlobber

Quote:

Originally Posted by Colin

I noticed that I cannot clock my memory as high with the 3700+ compared to the CAA2C 3500+, did you guys notice the same thing? My Mushkin memory can do around 260 @ 1.5-2-2-5 with the 3500+ but can only do 246 with the 3700+. :(

I know at least one person which is able to run his TCCD higher than before on Sandy than on a Winny... Colin, probably some of the timing values not quite right... but don't ask me for the correct ones :D Refer to kakaroto's DDR600 guide, I think, he has added some info on TCCD and San Diego memory controller relations there...
06-07-2005, 10:42 PM
chefnr1

pifast with very tight timings 1,5-2-2-3 ,read preamble 4,5
http://upl.silentwhisper.net/uplfold...d1/pifast8.jpg
06-08-2005, 06:40 AM
Colin

Quote:

Originally Posted by mrlobber

I know at least one person which is able to run his TCCD higher than before on Sandy than on a Winny... Colin, probably some of the timing values not quite right... but don't ask me for the correct ones :D Refer to kakaroto's DDR600 guide, I think, he has added some info on TCCD and San Diego memory controller relations there...

Cheers, thanks for letting me know. I will definitely check out the guide! :D
06-09-2005, 09:39 AM
Asheis

Finally got my rig up! (FX55 SD)

Hopefully will have some screen shots up once I get my new PS (the one I ordered just didn't have enough... POWA! lol, anyway..

I did manage a nice 3.1ghz very stable (VapoLS), and a 10,000 3dMARK05 before things went wrong >.<

The graphics cards are sucking the most power, I think.
06-09-2005, 09:44 AM
Charles Wirth

FX 57 has cold boot problem, I am helping setup one on phase change. beyond ~-20c no boot :(

Hopefully I am wrong but right now it looks like a problem for this chip.
06-09-2005, 10:43 AM
BMORIN

It makes no sense that the other 90nm SanDiego's can handle -50c+ but this one can't handle -20c. I wonder if it's just THAT chip? Interested to see results with this thing.
06-09-2005, 10:48 AM
easypanic

kakaroto had one sd3700+ that could handle -20°c too ;)
06-10-2005, 12:52 AM
koei

CABGE 515SPMW @ 310x10 1.63v Prime stable. It can go higher but I wan't to keep RAM at full capacity. This will be 24x7 setting. Running on MachII GT -27C idle.
06-12-2005, 06:51 AM
babyelf

hey guys.. jsut wondering whether is there a week number to look out for the san diegos?
06-12-2005, 07:24 AM
fagin

Quote:

Originally Posted by Colin:I noticed that I cannot clock my memory as high with the 3700+ compared to the CAA2C 3500+, did you guys notice the same thing? My Mushkin memory can do around 260 @ 1.5-2-2-5 with the 3500+ but can only do 246 with the 3700+.

Try using a 10.5 multiplier (yes I know it's not actually 10.5) It allowed me to clock my BH6 exactly the same as on my previous 3500s.

Before I was limited to 240 - now 260.
06-12-2005, 07:27 AM
esdee

Quote:

Originally Posted by FUGGER

FX 57 has cold boot problem, I am helping setup one on phase change. beyond ~-20c no boot :(

Hopefully I am wrong but right now it looks like a problem for this chip.

just what i didn't want to hear
06-12-2005, 09:01 AM
babyelf

anyone know?

is there a good week to look out for? =/
06-12-2005, 11:24 AM
mrlobber

Quote:

Originally Posted by babyelf

anyone know?

is there a good week to look out for? =/

Heh, try to avoid 0516WPAW. Under air it quite sucks. Then had it under dry ice this weekend. Maximum I was able to boot to Windows was 3130 Mhz @ -37C. Built in memtest run also at 3300 Mhz, though (I suspect some problems with my mobo as well, but anyway).

Btw, any information on which steppings are sent out right now? Haven't seen much 0517 and later San Diegos...
06-12-2005, 11:34 AM
coop

There are better steppings but if you can get them cold there are pretty good .. http://www.xtremesystems.org/forums/...705#post904705 and 3.063Ghz here http://www.xtremesystems.org/forums/...700#post904700
06-12-2005, 11:40 AM
fareastgq

I have a 05-17, about 2750 on 1.45 volts in bios. I did a suicide of @ 2960 at 1.7, I didn't want to do more because of stock HS, hehe. On water I would say 24/7 prob = 2.8, on phase or colder who knows, 3.2-3.5? I'll do some real testing and post it in the offical OC thread with some screenies. Also, the stupid heat spreader is on also, making the chip much hotter than what it should be, I suspect amd is using that plastic goo crap now under the spreader instead of nice thermal paste, I will be performing some sugery when the water gets here, hehe.
06-12-2005, 11:49 AM
coop

Your comment on the goo reminded me of something. I was doing some things while Smartguardian was on the screen, and every task from opening folders or internet to doing Pi, caused the cpu temp to soar momentarily then almost instantly as the task was done returned to normal. I did not know if that was accurate to what was happening or just picking up extra voltage somewhere while the task was being performed.
06-12-2005, 12:33 PM
mrlobber

Quote:

Originally Posted by coop

Your comment on the goo reminded me of something. I was doing some things while Smartguardian was on the screen, and every task from opening folders or internet to doing Pi, caused the cpu temp to soar momentarily then almost instantly as the task was done returned to normal. I did not know if that was accurate to what was happening or just picking up extra voltage somewhere while the task was being performed.

When under dry ice, I observed the same - temperature jumps at about 10-12 C. At full load, however, the temps remained the same. Weird.
06-12-2005, 04:56 PM
babyelf

i'm getting a san diego.. it's being shipped over to the supplier now.. might get to choose one..

that 0516 WPAW looks nice..

so there's no really a good one to look out for right now?

u think the 0517 will be the same as the venice's 0517 lol.. i doubt it.. hmm
06-12-2005, 05:35 PM
fareastgq

yes try to get a 05-17, every one I have seen has had good results so far.
06-12-2005, 05:50 PM
babyelf

for san diego? mr. rock lee? :p

so it's the same like the venice?
06-12-2005, 06:16 PM
Crazykooter

I have one of the 1st SD 3700's which is week 15 and I am at 2904 mhz @ 1.62 vcore 100%. So I think the earlier version it is the better.
06-12-2005, 06:27 PM
babyelf

hmm the results are pretty mixed up at the moment.. i'll just have to ask for the list of stepping he have when it arrives.. then choose one that i think will be the best =/

PMW or PAW at least
06-12-2005, 07:12 PM
fareastgq

Quote:

Originally Posted by babyelf

for san diego? mr. rock lee? :p

so it's the same like the venice?

It would seem so, did u check out the officail oc'ing thread yet? pick a high oc stepping or 2 and hope he has it, heh.
06-12-2005, 10:17 PM
babyelf

yea.. but it seems like all the results are abit mixed up =/

i'm hoping for a 3ghz one with my water :p like my venice.. :D

Show 100 post(s) from this thread on one page