A64 s939 Winchester in DFI Ultra-D: 1.5(CL)-2(tRCD)-3(tRP)-5(tRAS), 3.4Vdimm, 250, prime is happy. 250-251, 1.5-2-2-5, memtest is happy. using same sticks that were in the nf7 (above quote).Quote:
Originally Posted by pershoot
Printable View
A64 s939 Winchester in DFI Ultra-D: 1.5(CL)-2(tRCD)-3(tRP)-5(tRAS), 3.4Vdimm, 250, prime is happy. 250-251, 1.5-2-2-5, memtest is happy. using same sticks that were in the nf7 (above quote).Quote:
Originally Posted by pershoot
With intel managed to drive 272Hhz fsb 1:1 with my pair of khx3000 sticks
http://valid.x86-secret.com/show_oc?id=7653
SuperPi 8m also went through
Not bad for pc2700 sticks :D
Saaya, i've promised you some screen...
Here they are :D :D
306WE A-Data PC3200 Winbond BH5 chips 4x256MB
http://xs21.xs.to/pics/05121/BH5_275.JPG
Cl2 5-2-2 1T dual channel Enabled (but Clock gen covers the "CpuZ scree :( ) 3.36 volts on an EpoX 9NDA3+ rev 1.0 (nForce3 Ultra) modded (thanks to Bigtoe for help ;) :) ).
I've 4x256MB sticks, if you notice i've installed 512MB (2x256MB in dual), but all of the 4 sticks give the same result.
Now I'm searching for a GOOD Winch (mine doesn't work over 2.2-2.25Ghz.......).
Bye
Crim
Corsair CMX256A-3500C2
XMS3502 v1.1
0315086
XMS3500 256MB 433mhz CL2
at 3.8v
http://upl.silentwhisper.net/uplfold...z-mem-cbid.JPG
how far your bh5 can go with 3.26v? coz i also got 1 pair of 256mb cmx3500c2 rev1.1Quote:
Originally Posted by chefnr1
well at 3.26 i think i'll have got them to around 260+ its long ago that i've had that low volt on them :)Quote:
Originally Posted by gsan
woww... 260+ but mine only can 243mhz :(
btw,
Winbond
23320
W942508BH-5
this bh5 is belong to which week?
Cool thread! I gotta post some results here at some point.
ok strange? but my sticks is outstanding :)Quote:
Originally Posted by gsan
week of mine i have no idea have'n take hs of :p:
Can you run example SP1M with those clocks?Quote:
Originally Posted by chefnr1
Heres mine highest SP8M with KHX3500 at 3.7v 270Mhz
no i can't do it now because i've not have the rigg it's sold, but i have run att 275x 11 and done 30 sec but the screen is in an other hdd, i've tryed to run super-pi on 286x11 but it said not equal somthing :) so on that speed it doesnt want it...Quote:
Originally Posted by FriGidi
Winbond
314WE
W942508BH-5
280 1.5-2-2-5 @ 3.7v
http://privat.bluezone.no/forman/images/280.JPG
what chip setting? :)Quote:
Originally Posted by qk4722
thx pershoot, added :)
what chip setting or spd programming date?Quote:
Originally Posted by Mauri Antero
Crimson_dAWN, nice! but please let me know what the max prime + 3d stable speed is! :D
chefnr1, chip date or spd programming week?
and 3d stable +prime95 blend results only please :)
hey, please post a reply with all your results ,and add what the max 3d plus prime95 blend speed is :)Quote:
Originally Posted by gsan
:bows:Quote:
Originally Posted by masterofpuppets
Formann, thx, but again, prime95 blend +3d stable speeds only please :)
superpi behcnable can hardly be called stable, and memtest seeems to run great sometimes but the mem wont even boot into windows at the same speed, so please use prime95 blend+3dmark or q3 or some other 3d bench to test stability, thx :)
Have to post when i get the new rig becuse this rig i've had that speed i sold so i will post some later when my new finaly arrive..
np, take your time :D
seems this thread will live at least 2x as long as i originally thougt since bh5 production has started again and we will have new bh5 in a few weeks :lol:
so my twinmos speed premium 1A4T already qualifies again for this section ? :=)
sure :)
its relabeled bh5... :D
(or is it ch5?) ask alonso, he knows :)
new results...
nf4, 280mhz mem, bh5, khx3200, one 256 of 315WE, one 256 of 327WF. run in dual channel, 3.8v
also 275mhz bh5, khx3200, 339WF, dual channel, 3.6v
edit: both results run at 2-2-2-2
Completely stable?! :DQuote:
Originally Posted by Evil_Spork
I mean, can you do occt or s&m with it? I really do wonder as I never got stable results with memtest-stable ram...
anybody has kingston kvr bh 5 0251WE? i want to know how good is this chip, thks a lot
not stable at 280, 275 is pretty stable though. 270 is stable, and 265 is like theres no stress on the ram. :p:Quote:
Originally Posted by SAE
280 is tested 3dmark stable. superpi wont run on this mobo at high clocks so that cant be used... but sandra and everest work as well as 3d01! :)
Yeah, bud, I know these superpi probs. Please give lowering LDT multiplier a try :)Quote:
Originally Posted by Evil_Spork
I was able to complete superpi32m at 270x12 with my kingstons (3.5V). But I had to set LDT to 3x. (310p) And it's not memtest stable showing some errors at times.
Seems that mem does not like 3.6V+
ill try 3.5v and LDT 3x.. but im pretty sure im using 3x already :(Quote:
Originally Posted by SAE
Just to add a little, using some buffalo bh5 and testing them now on DFI ultra-d.
Can get to 275 at 2.5/4/4/7