Micron D9 GMH\GKX\JKH etc club

Yiepieh came home and the GKX were there:

http://www.abload.de/thumb/18112008107a2n4.jpg

http://www.abload.de/thumb/18112008111g0p7.jpg

preparin and yes its GKX!

http://www.abload.de/thumb/14112008087z31v.jpg


plug in

http://www.abload.de/thumb/18112008109ycko.jpg

First Boot up and performance check (for safekeepin it pumped Vdimm to 2,4v in bios i will lower lata)

http://www.abload.de/img/fsb490ddr21307pf725qr.jpg

Can't believe i only spend 52€ on them. Production date was early 2006! Kick ass i didn't thought i could get chips so old and yet never used b4.

Awesome I so want some

@Elektrosadist: Interesting :yepp: How much can these ones perform with 4-4-4-4 ? :)
'Cause my GKX Kingston HyperX PC85000 do not get along with 4-4-4-4 ? They perform really well on CL5 though ;)

Quote:

---

Originally Posted by George_o/c

@Elektrosadist: Interesting :yepp: How much can these ones perform with 4-4-4-4 ? :)
'Cause my GKX Kingston HyperX PC85000 do not get along with 4-4-4-4 ? They perform really well on CL5 though ;)

---

well i just got them today so i hadn't had time to test them to the extend. at what frequency and at what perfomance level (tRD) do you run that or want me to run it?

What cellshock sticks are those ? the 1200s ? you running 4x1 ?

There is no CellShock 1200 kit, the highest rated CL 5 kit is the 1150's. They look like the 8000 CL 4's (GKX), the same as my CellShock kits.

Electro - Nice 32M run. Was the ram missing the thermal pads corresponding to some IC's or did you remove them?

my cellshocks dont have thermal pads, it is arctic ceramique and they directly tough the heatspreders better imo

Yes my kits also have thermal paste.

Sorta new to this stuff, how do i capture screen shots of cpuz, and everest, and put them on here, i know i can save the everest scores, but the file is to big to put here, so how do shrink the file, and how do i capture cpuz screen shots ? thanks guys.:up:

Arrange all the windows you want to capture together (just neatens it up I hate full screen shots with only 3 or so windows open such a waste of space) - if you dont know what i mean look at some of my screen shots

Hit print screen button

Open photoshop

Make a new window, then go 'EDIT' -> 'paste'

Go to 'Image' -> image size

resize to ~900 wide

save as jpeg ~ 200 - 300kb in size

upload

I'v got some money to get some RAM (for overclocking only) and could someone tell me what I should get. I have about $150 Australian MAX to spend. I looked and the Cellshock PC2-8000 CL4's aren't for sale anymore. So could someone recommended me some RAM. I'v seen that team xtreme 6400's and 8500's are good.

You could try these:

http://www.memoryc.com/computermemor...00dualkit.html

http://www.memoryc.com/products/desc...kit/index.html

No guarantees on how they'll perform and with barely any stock remaining you will almost certainly not get D9 ram back if you had to RMA. Better hurry whatever you choose, stock everywhere is dwindling. Just look around memoryc or australian etailers and try to find some that look good.

Thx, I might put some more money into it. I'll get one of each, thats about $185 with postage. :D

I haven't seen any results for the Cellshock PC2-8500's

Could someone plz post some?

I dont have photoshop, hmmmm have to find a copy. I didnt know you needed that.

So the 400 strap on p45 boards is bugged ? so if it says your memory is running at 1300, its really not ?, how much off is it. What strap gives the best performance 333 ? Thanks again.

Would these have D9's

http://www.crucial.com/store/partspe...KIT12864AL106A

I checked and it says part numbers ending with .16FDx and I don't think they have that. But it doesn't says what the chips are if they don't end in that. Could someone help?

No they aren't D9. The chips are 128M, meaning the 1GB modules are single sided. D9's are 64M and 1GB modules are double sided. The single sided crucials are really bad, they'd be lucky to hit 500MHz CL5. They are probably PSC, but I don't know for sure, I haven't looked them up because they are so bad. 4GB 8500 kits from Mushkin and Gskill clock better.

Ok thx, I won't get them. So are all D9 ram chips 64M and 1GB modules that are double sided?

Yes, all D9 GMH/GKX are 64M and all 1GB modules that use them are double sided. A double sided module has 16 IC's on it, and as each GMH/GKX IC is 64M, 16 x 64 = 1024 MB.

I see, thanks.

No problem, good luck on your quest mate.

This is my new achievement with 2 sticks of "Red Devils": 1,98 Vdimm :D

http://img127.imageshack.us/img127/9316/1200of2.jpg

Nice, is that fully stable, or just partially stable (ie: 53% pass of only 1200mb ram)? Memtest is harder on the ram/NB when you run 2 instances of it with ~860 - 890MB in each instance.

How do your CS's clock mate? They should do 650 (DDR2 -1300) pretty easy.

Thats awesome :up:, were could I get some of those?

Quote:

---

Originally Posted by CryptiK

Electro - Nice 32M run. Was the ram missing the thermal pads corresponding to some IC's or did you remove them?

---

Nah it was all there. I removed the Cellshock HS and put them under OCZ Flex Watercooling HS which i painted black. You can see that in the picture above the everest run.

FedEx delivered to me today the last Cellshock 8000 C4 kit from MemoryC :D I'm at work so I can't do much with them right now, but I did open the package and take a look. The PCB on these looks different from the 8000 C5 kit, it's more glossy or something.