ASUS P5Q3 Deluxe discussion

Printable View

Show 100 post(s) from this thread on one page

08-18-2008, 05:11 PM
Tony

1433MHZ 5-5-5-20 4GB kit 1333EB

http://www.ocztechnologyforum.com/fo...1&d=1219098199

Fully stable, multiple tests with linpack and PCmark Vantage loops.

Board is quirky for sure.

http://www.ocztechnologyforum.com/fo...9&postcount=95

Check that, you can download the CMO file for the profile and test it also if you wish
08-18-2008, 08:35 PM
mevorach

CPU Voltage: 1.8375v ????

Isn't it crazy ? (inside)
08-18-2008, 11:40 PM
Sav

Quote:

Originally Posted by Tony

1433MHZ 5-5-5-20 4GB kit 1333EB

Fully stable, multiple tests with linpack and PCmark Vantage loops.

Board is quirky for sure.

http://www.ocztechnologyforum.com/fo...9&postcount=95

Check that, you can download the CMO file for the profile and test it also if you wish

do you pass spi 32M?
08-19-2008, 01:37 AM
Tony

Quote:

Originally Posted by Sav

do you pass spi 32M?

5 loops TV and Movies pcmark vantage then 1 full loop of vantage followed by around 15 loops linpack

who cares if its 32m stable, I sure don't LOL

Its stable man, thing is now im working on 8GB profiles
08-19-2008, 01:40 AM
Tony

Quote:

Originally Posted by mevorach

CPU Voltage: 1.8375v ????

Isn't it crazy ? (inside)

did the profile set that?

i only had 1.4ish set and the profile loads this for me each time
08-19-2008, 04:17 AM
modderwannabe

1 Attachment(s)

here's what i got for now ... so far stable after 2 hours of usage :) will appreciate if there are any tips or guides to further improve my system .. hehehe new to this ;)
08-19-2008, 05:06 AM
Crazy Inside

Quote:

Originally Posted by mevorach

CPU Voltage: 1.8375v ????

Isn't it crazy ? (inside)

I think no!! I used that voltage for the 5160Mhz, that was to reach the 655FSB and the 5700Mhz sees some posts ;

Regards
08-19-2008, 05:50 AM
zeuverclok

The new bios 1303 is very good here is what I am doing with my ram

http://valid.x86-secret.com/show_oc.php?id=405662
08-19-2008, 07:06 AM
modderwannabe

4 Attachment(s)

Quote:

Originally Posted by modderwannabe

here's what i got for now ... so far stable after 2 hours of usage :) will appreciate if there are any tips or guides to further improve my system .. hehehe new to this ;)

and some pics to share with my new build ;)
08-19-2008, 07:12 AM
Slovnaft

Beautiful looking rig.
keep posting clocks, i like encouraging results =]
08-19-2008, 07:50 AM
modderwannabe

Quote:

Originally Posted by Slovnaft

Beautiful looking rig.
keep posting clocks, i like encouraging results =]

thx ... would love to post more results but need more input on settings for this board & ram
08-19-2008, 07:52 AM
Dr@gonXP

Hi Guys,

Currently, Iam running a Sapphire Radeon 4850 on my P5Q3 (Serial 86M0AIxxxxxx). I want to raplace the 4850 with a Geforce GTX260, does the GTX fit onto the P5Q3?
I read that there are some problems with the Nvidia GTX2XX series and the ASUS P5Q Deluxe...

Cheers
Dr@gonXP
08-19-2008, 07:53 AM
Slovnaft

well for starters try getting your RAM up to its stock 1600mhz if you can.
your cpu could def. use some more volts.
post BIOS settings?
08-19-2008, 08:03 AM
Sav

this motherboard is very crazy:(, it's impossible to set 400x9 or 400x9,5 with dram frequency 1600, spi 32 freeze on first loop.
I tried 1000 bios setting with high/low voltage /timing but spi 32 is not stable.

On my old Bltz i can set 1600/1800 MHz with all divider and fsb ...I am very disappointed for this mainboard:shakes:

Quote:

Originally Posted by modderwannabe

here's what i got for now ... so far stable after 2 hours of usage :) will appreciate if there are any tips or guides to further improve my system .. hehehe new to this ;)

ok you are stable, but why i must set 1333 MHz if i buy 1600 memory?
08-19-2008, 08:07 AM
Dr@gonXP

Quote:

Originally Posted by Sav

this motherboard is very crazy:(, it's impossible to set 400x9 or 400x9,5 with dram frequency 1600, spi 32 freeze on first loop.
I tried 1000 bios setting with high/low voltage /timing but spi 32 is not stable.

On my old Bltz i can set 1600/1800 MHz with all divider and fsb ...I am very disappointed for this mainboard:shakes:

What RAM, Setting, Bios you are using?
08-19-2008, 08:12 AM
Slovnaft

Quote:

Originally Posted by Sav

this motherboard is very crazy:(, it's impossible to set 400x9 or 400x9,5 with dram frequency 1600, spi 32 freeze on first loop.
I tried 1000 bios setting with high/low voltage /timing but spi 32 is not stable.

On my old Bltz i can set 1600/1800 MHz with all divider and fsb ...I am very disappointed for this mainboard:shakes:

ok you are stable, but why i must set 1333 MHz if i buy 1600 memory?

as far as i know this is an issue accross all P45 cipset mobos; they just cant support 2x2gb RAM at speeds over 1333mhz

unless you're talking about a 2x1gb kit, in which case i have no clue
08-19-2008, 08:13 AM
Sav

I had problems with 2x2 GB Corsair MS3 1600C9, but now i buy 2x1 gb Ocz 1600 c7 (D9gtr) and i've the same problems.

I tried with all setting it's possible :D
08-19-2008, 08:18 AM
Dr@gonXP

Which Bios?
Try Strap: Auto ;)
08-19-2008, 08:20 AM
Dr@gonXP

Quote:

Originally Posted by Dr@gonXP

Which Bios?
Try Strap: Auto ;)

Edit: Give the orange RAM slots a try:rolleyes:
08-19-2008, 08:25 AM
Sav

Quote:

Originally Posted by Sav

I tried with all setting it's possible :D

:D
I'm not a newbie :D especially with asus motherboard ;)
08-19-2008, 08:29 AM
Dr@gonXP

I had similar problems with 2GB A-DATA1600, but with the new 1303 Bios everthing works fine (and I am also not a newbie ;) ).
This Board is very good but a bit tricky...
08-19-2008, 08:34 AM
Slovnaft

i dunno, pretty much the only complaints about this board i've heard (and i've read this whole thread) have been from OCZ ram.
newegg told me ocz ram had issues with this, but i'm a mushkin man so i felt safe.
now i just need to get my ram back from rma to verify this.
08-19-2008, 09:27 AM
Tony

This board loves big fsb, low ram dividers, tight timings and low TRD. Forget 1600mhz, its faster at 1200+ with 5-5-5- timings with a lot less setup time.
08-19-2008, 09:48 AM
modderwannabe

i'm running 1200 now as tony mentioned, but will try bigger fsb.
i leave most of the bios settings to auto. very happy now cos i do not have so much of auto-restarts & having alot of trouble getting into bios to reconfigure settings and i've also tried multiple settings with very bad results such as having trouble to enter bios, tried resetting the pc etc ... but by removing 2nd slot of ram on the orange slot it does allow me to get into bios. another problem where it wont even boot into windows and shows a bluescreen then auto restarts itself. when settings are changed with 8/7/7/27 dram Voltage of 1.80 FSB strap @ 400mhz Dram @ 1066mhz, it boots and loads windows fine, but then applications would quit by itself then strarts to go crazy or an auto restart again !!!

but with 5/5/5/20 settings, my machine is very stable with 1200mhz dram. will try to post some bios settings. good luck to all with the settings and hope to see more stable bios settings ;)
08-19-2008, 10:29 AM
Sav

Quote:

Originally Posted by Dr@gonXP

I had similar problems with 2GB A-DATA1600, but with the new 1303 Bios everthing works fine (and I am also not a newbie ;) ).
This Board is very good but a bit tricky...

lol :D

Now I will test fsb 500 and ram 1333 :p:

Show 100 post(s) from this thread on one page