yes, cpu and nb maybe gpus someday.......Quote:
Originally Posted by aiya
Printable View
yes, cpu and nb maybe gpus someday.......Quote:
Originally Posted by aiya
:D :D :D :DQuote:
Originally Posted by ChaosMinionX
Ok... ZALMAN TEST RESULTS.
P5N-32-E-SLI-PLUS with Q6600 (Stock Speeds for Test)
Single 8800GT (NO OC for Test)
Ambient Air Temp 20 Deg.
The test consisted of 5 Back To Back Runs of Futuremark 06.
Stock Cooler Stock Fan Speed (out the box as it were)
No Load after 10 Min
50 Deg C
Futuremark Passes max temp
1. 74
2. 77
3. 80
4. 82
5. 82 (If I did more tests, I believe it would keep heatsoaking higher)
VF-1000 60% Fan Speed (Set from Bios)
No Load after 10 Min
43 Deg C
Futuremark Passes max temp
1. 50
2. 52
3. 52
4. 52
5. 52 (No Crap There...)
That is a "Delta" of 30 Degrees LOWER... Unreal!
Remember, this is only 60% Fan Speed. It is dead silent and performing Very Very Well.
I did not test the stock cooler at higher speeds because it becomes REDICULOUSLY LOUD.
I have had this product twice now, Once on my GTS and now on the GT. I am completely impressed with the performance and looks of this.
Please spend the money, it's a No Brainer Upgrade. Don't even think about it, just buy it.
http://img2.putfile.com/main/11/33315572064.jpg
http://img2.putfile.com/main/11/33315572230.jpg
http://img2.putfile.com/main/11/33315572217.jpg
http://img2.putfile.com/main/11/33315572325.jpg
http://img2.putfile.com/main/11/33315572383.jpg
http://img2.putfile.com/main/11/33315572444.jpg
http://img2.putfile.com/main/11/33315572487.jpg
http://img2.putfile.com/main/11/33315572410.jpg
http://img2.putfile.com/main/11/33315572432.jpg
http://img2.putfile.com/main/11/33315572183.jpg
http://img2.putfile.com/main/11/3331557219.jpg
http://img2.putfile.com/main/11/33315572281.jpg
http://img2.putfile.com/main/11/33315572296.jpg
http://img153.imageshack.us/img153/2...ture199fw5.jpg
Its kinda dusty.
Before this Zalman i had an ArcticFreezerpro64.
Dont see any difference in temps though.
Probably has something to do with taking dirty ass air from outside.. LOLQuote:
Originally Posted by sirheck
Actually i just ran the dryer duct yesterday as i am F@H and its cold here:)
My air cooled rig!
http://img529.imageshack.us/img529/6231/seap1.jpg
[]'s
Simps
On cpu, Thermalright Ultra120 eXtreme with Noctua NF-S12@900rpm atm:
http://img148.imageshack.us/img148/9...e001ti9.th.jpghttp://img148.imageshack.us/img148/1...e002bo1.th.jpghttp://img99.imageshack.us/img99/832...e003gi0.th.jpghttp://img148.imageshack.us/img148/2...e004wt0.th.jpg
Awaiting Scythe S-Flex for TRUE120.
In case, 6x CM Red Silent 120mm, 1x200mm Antec, 1x CM Red Silent 80mm:
http://img150.imageshack.us/img150/1...e001bi1.th.jpghttp://img150.imageshack.us/img150/6...e002jl0.th.jpghttp://img144.imageshack.us/img144/1...e003xx4.th.jpghttp://img144.imageshack.us/img144/3...e004eu8.th.jpghttp://img144.imageshack.us/img144/5...e005ax2.th.jpghttp://img227.imageshack.us/img227/3...e006rc2.th.jpg
I've since moved the fan to the right of the heatsink:p:
http://i75.photobucket.com/albums/i3.../Picture-2.jpg
Brian MP5T & Simps, are you guys using any heatsinks for the PWM area?
it's a two phase analogue PWM, where you can see 2X 3 sets of the MOSTFETS together, thats them, without any heatsink I tested with my IR sensor around 90-110 degrees, and immediately took the cards out to stick a heatsink on them.
Yeah, swap the fan to suck air from the case.Quote:
Originally Posted by Brian MP5T
Mine already have heatsinks on them:DQuote:
Originally Posted by wewe
Mine was pulling air out of the case but i switched it to pull air inside the case.Quote:
Originally Posted by Nazu
Very nice mad_skills
I have an P5N-32-SLI-PLUS.Quote:
Originally Posted by wewe
It had heatpipes that went from the NB and SB to Banks of Fins that were on the Mosfets by the CPU.
When I removed the Heatpipes, I left the Bank of fins where they were..
http://www.hardwarezone.com.au/img/d...p5npre_top.jpg
Just added HR-03 and HR-11 to my R600. Dropped 30ºC... Thermalright is Teh Pwnage :D
Phone pics FTL...
http://img338.imageshack.us/img338/8...1resizeca6.jpg
http://img338.imageshack.us/img338/4...presizeiu7.jpg
http://img47.imageshack.us/img47/837...3resizenx6.jpg
http://img137.imageshack.us/img137/8...2resizewt2.jpg
Behave!
Nice Brian, I see you've gone from your thermaltake CPU heatsink and used the cnps9700, good on ya ;)
Tnx mate.:up:Quote:
Originally Posted by HaGGaRd
The Surface is Much Much better and it's a more effective cooler IMO.Quote:
Originally Posted by HaGGaRd
Here's some pics of my recently lapped Tuniq and E6750. My first time doing it. Went 320 -> 600 -> 1500 grit. I was completely surprised that I didn't fry my CPU. That said, if I didn't fry mine, no one will.:up:
http://i48.photobucket.com/albums/f2...ld/Lapped2.jpg
http://i48.photobucket.com/albums/f2...ld/Lapped1.jpg
Try and find 2000 and 2500 grit.
It makes mirror finish without need to polish the base.:up: And will make your Tuniq even better for sure.:up:
I used 320/600/1000/1500/2000/2500 profiles on my old HyperTX and look what mirror you get:
http://img89.imageshack.us/img89/257...e001py7.th.jpg
http://img88.imageshack.us/img88/3191/img0013io9.th.jpg
My new Asus P5E Mobo should be arriving tommorow :)
I will post pics of it and my build asap!
:)
Gosh it's quiet
=o
RIGHT HERE WE GO
Upon waiting for my P5B Deluxe to be returned from Asus... I knew I was going to wait a while, meanwhile I couldn't stand it after a few weeks of having crysis but couldn't play it, so I went ahead and spent some money on a new X38 mobo :)... My Asus P5E had arrived.
Here are some pics of the mobo and my build when it was finally finished:
http://i80.photobucket.com/albums/j1...d1337/p5e1.jpg
http://i80.photobucket.com/albums/j1...d1337/p5e2.jpg
Beasty Heatsinks
http://i80.photobucket.com/albums/j1...d1337/p5e3.jpg
http://i80.photobucket.com/albums/j1...d1337/p5e4.jpg
http://i80.photobucket.com/albums/j1...acketfiled.jpg
Oh yes, and there was a problem when I was fitting my CNPS9700, from what I gather it was a support clip that is used when putting the cooler on a AMD mobo. I ended up having to file it down so it could squeeze in with all them heatsinks :D
http://i80.photobucket.com/albums/j1...7/black-io.jpg
Lovely Black IO shield plate with padding on the other side! (sorry I forgot to take a pic of the lovely padding)
http://i80.photobucket.com/albums/j1...pclightson.jpg
Ta da! Ops slightly blurry
http://i80.photobucket.com/albums/j1...7/DSC02322.jpg
http://i80.photobucket.com/albums/j1...7/DSC02323.jpg
http://i80.photobucket.com/albums/j1...7/DSC02329.jpg
http://i80.photobucket.com/albums/j1...7/DSC02327.jpg
http://i80.photobucket.com/albums/j1...lcddisplay.jpg
22.7'C on my HDD, 56'C Threshhold before the alarm goes awol
http://i80.photobucket.com/albums/j1...ntroller-1.jpg
Green UV Springs for watercooling hose, but I used them on some of my cables :)
As for the moment i've only got my E6600 @ 3.06GHz, 1363fsb, 23'c idle.
But tommorow, after i've fixed a few audio issues, i'm going to reach alot higher.
Sorry if there was to many images.
Next on my list is a 8800GT or a GTS Rev.2 to replace my sketchy ATI Radeon X1800 XT
Please comment :D
thats the first time i've seen a black IO panel - & it is HOT!
Which fan controller is that? I'm looking for a decent one, yours looks the job.
Get a sunbeam rheobus, or one of the Vantec Nexus controllers ;)Quote:
Originally Posted by apexracing
Few upgrades to the family PC:
Before:
http://i75.photobucket.com/albums/i3...Picture007.jpg
After:
http://i75.photobucket.com/albums/i3.../pics/fpc2.jpg
It really is quiter :yepp:
Yeah man its one of a kind, its so nice :DQuote:
Originally Posted by tiro_uspsss
Plus there's padding on the other side :up:
Quote:
Originally Posted by apexracing
This one is an Akasa Fan Controller Pro :) Its very nice and has 4 temperature sensors that can be set up for your Hard Drive, Case, CPU and PSU
Heres my rig:
http://i25.photobucket.com/albums/c5...4/IMG_1480.jpg
Without flash
http://i25.photobucket.com/albums/c5...4/IMG_1479.jpg
With Flash
http://i25.photobucket.com/albums/c5...4/IMG_1478.jpg
Intel Core 2 Duo e6400 @ 3ghz on Scythe Infinity
MSI P6N SLI Platinum
Buffalo FireStix 2Gbs DDR2 800 4-4-4-12-1T
EVGA 8800GT SSC
Seagate 320GB 7200 SATA HD
Samsung 20x SATA DVD Burner
OCZ GameXstream 700watts
5 Antec Green LED 120 Fans on Sunbeam Rhoebus Fun Controller.
__________________
dude i have no idea what that looks like, what its purpose is etc etc, u *GOTTA* show me :D it sounds dam cool! :cool: :up:Quote:
Originally Posted by HaGGaRd
Where is your HDD?Quote:
Originally Posted by Tommy_Hewitt
Nice case! :up:
Was not in the case when i had taken this picture ;)
Where you place him? In the HDD cage or other place?
Where ;)Quote:
Originally Posted by Mphs
Rbs.
:wave:
HDDs are in an "Ichbinleise-Box20", which stands in front of the case fan ;)
I know, my mistake. Sorry.Quote:
Originally Posted by rbsmontemor
Can you put a pic please?Quote:
Originally Posted by Tommy_Hewitt
--
The Lian-Li PC7 SE III HDD cage is compatible with Lian-Li PC7 Plus II?
I will make some pics tomorrow ;)
Some drooltastic pics you got there, Tommy :cool:
So, here are new pics with HDDs inside ;)
http://www.abload.de/img/case3qq2.jpg
http://www.abload.de/img/casep08.jpg
@Tommy_Hewitt: Man i'd love to see the back of that case :up:
The back or the right side?
oopppss... the RIGHT side i mean.... i wanna see how you did your wiring :DQuote:
Originally Posted by Tommy_Hewitt
I cut a hole over the mobotray ;)
http://www.abload.de/img/dsc01464e3w.jpg
Loving the lian li :)
Nice work Haggard, i like your cable management.
UV effects are really nice, and those spiral cables are a winner.:up:
Tommy, can you put a frontal picture of the hole pls?
I want to make a well in my box for a longer while. :rolleyes:
Yeah, of course, but not today
PC in my TJ09.
This is version 1.0
Version 2.0 will have watercooling and cable managment. :)
http://i144.photobucket.com/albums/r...12-07_2221.jpg
http://i144.photobucket.com/albums/r...12-07_2225.jpg
http://i144.photobucket.com/albums/r...12-07_2227.jpg
http://i144.photobucket.com/albums/r...12-07_2230.jpg
nice dusts deepsilver :D
Here are my temps and yes this is on air.
http://img518.imageshack.us/img518/5...retemp1st2.png
By sirheck
on what type of air???:S
Quote:
Originally Posted by Atal
http://img258.imageshack.us/img258/8...ture198zz1.jpg
By sirheck
I just reversed my rear 120mm fan.
Havent seen any moisture build up (even with rain) and its been this way
for a while now.
Ambient room temps are 22c.
OK, it's dusty .... but the temperatures are quiet normal. :p:Quote:
Originally Posted by HaGGaRd
Its that famous German dust :p: :DQuote:
Originally Posted by HaGGaRd
building a new rig :), got most components for it now just waiting for the mobo graphics card and memory then its all finished. I should be getting the rest of the bits in next few weeks. il get pics up asap so i can see what you lot think of it.
LMAO its gooch, what stuff you getting?? in what case?
My computer atm, Specs in my sig. (i realise the CD drive isnt plugged in, my IDE to SATA convertor set fire and havent been bothered to get an IDE cable out)
http://img.photobucket.com/albums/v3...j/shutter1.jpg
http://img443.imageshack.us/img443/7836/computerwh1.jpg
http://img170.imageshack.us/img170/4...mputer2az0.jpg
Not that pretty, but airflow wise, its not too shabby
What PSU is that?
Hiper 530 watt type R.
I suppose its reliable but i realy dont like the modular design, they are too big and bulky (the connectors), i prefere other designs like the corsair HX series
It came in a toolbox though, which was handy :)
Got my 3870 :yepp:
http://i151.photobucket.com/albums/s...1/DSCF2659.jpg
yes taylor its the one n only GOOCHGRAB nice rig il get sum pics of mine up n show ya
Nice Psu, I love these connectorsQuote:
Originally Posted by taylormsj
http://www.vtr-hardware.com/media/im...ews/1/7159.jpg
Yeh the connectors look nice, but they are a pain when put inside my case trying to get the best looking cable management.
That mirror finish looks great dont it :)
Nice thatguy, remeber me from CF forums?Quote:
Originally Posted by ThatGuy16
How are you liking your new card?
Also you should post some pics up of your side panel mod and fornt panel mods if you havent done so, they are rad !
yeah i know you :welcome:Quote:
Originally Posted by taylormsj
I think i did post them up here a while back, in the case gallery :up:
I love the new card, beats the crap out of that x800 i did have!
...
nice and clean, well done
But the color of the mobo is horrible XD
Yep. :down:Quote:
Originally Posted by Tommy_Hewitt
Where's the pic? :DQuote:
Originally Posted by Tommy_Hewitt
I need to see the hole... :rolleyes:
Quote:
Originally Posted by taylormsj
Twins!!! :yepp:Quote:
Originally Posted by mu||et
...
Quote:
Originally Posted by Morais
??:confused:
lol you dont get it?Quote:
Originally Posted by taylormsj
they have the same coloured motherboard which looks like what i :banana::banana::banana::banana: out :rofl:
Your eyes are :banana::banana::banana::banana:, my motherboard is red
Here is my new server...
http://img2.putfile.com/main/12/34718201593.jpg
I'll put some more when it's done.
It's going to be totally Red and Black..
Getting Phenom ready!!!!!
Going to build a phenom home server. Will go 4GB and a phenom B3 stepping cpu.
Sold off my FX60, got a 4800X2 brisbane (stand-by cpu until phenom B3 are out), 2.5Ghz, 65nm, 65Watter with a MSI K9A2 platinum. Cooled by a old sckool thermalright SI97A! :D
http://img.photobucket.com/albums/v4...5/P1030143.jpg
http://img.photobucket.com/albums/v4...5/P1030144.jpg
ragnarok95, you've rather colourful rig =).
^^ MSI and GIGABYTE both make crazy MOBOs
ragnarok95, should the ballistix memory be in the same lane?
On other note, is this because of MSI mobos posistion their DIMM slots abit differently than they do on some other mobos, e.g. the way you've posistioned your memory for dual channel?
hahaha :ROTF: DFI isn't as colorful, but it has some bright UV colors!:DQuote:
Originally Posted by Brian MP5T
Some mothebroards are like that, i abused bowers cos his ram sticks were next to each other, but it turns out they were running in duel channel ! The board was also an MSI boardQuote:
Originally Posted by HaGGaRd
May I ask why you need so much storage capcity?Quote:
Originally Posted by Brian MP5T
file server? one can never have too much hdd space :D i need more :mad:Quote:
Originally Posted by eToh
ragnarok i noticed your not running dual channel correctly.Is that intentional?
He he, i like that attitude duder !! :)Quote:
Originally Posted by Origin_Unknown
Ram layout for AMD and intel for MSI are diff.
Yes, mine are running at dual channel ;)
i pm'd him about it - he said its in DC :shrug: maybe MSI does things differently with DC & colours :shrug:Quote:
Originally Posted by Morais
edit: sheeesh u beat me to it ragnarok95 :p:
QFT QFT :up:Quote:
Originally Posted by Origin_Unknown
Dun worry guys, its confirm in Dual Channel mode.
Both CPU-Z and AMD Overdrive confirm its in dual channel.
So as the mobo instruction book! :D
suuuuure it does :para: :p: :D :up: j/kQuote:
Originally Posted by ragnarok95
Thanks for the info!Quote:
Originally Posted by ragnarok95
It's winter and my house was cold until I turned this server on..Quote:
Originally Posted by eToh
After an hour, the room was nice and comfortable..
:shrug: I need 4Tb because I have 4Tb of data..
It's awesome for Lan Parties.. It's attached to a Dual Giga-Lan. People surf and take what they want and sometimes add some stuff I don't have..
waiting for TR to send me my gpu heatsink.
http://Ar3s.fileave.com/IMG_0181.JPG
What Thermalright cooler is that on the CPU ?Quote:
Originally Posted by Tommy_Hewitt
HR-01 +Quote:
Originally Posted by Demo
Yeah taylor mate, I know, I whacked my mate over the head for doing this aswell, but he had a gigabyte board not an MSI, and it read Dual Channel in that config.Quote:
Originally Posted by taylormsj
i have the same mobo, what kinda of temps are u getting on the northbridge?Quote:
Originally Posted by sirheck
i get anywhers from 32C to 37C ( i re-pasted them with artic silver 5)
i experimented with a fan blowing on the bottom heatsink(northbridge) and it definitly helps keep it at a constent 32C
though i want to upgrade to a thermalright NB cooler. but i would have to modify the heatpipe cooler.
i notice the heat sink by the cpu socket (im assume there are the power regualtors thingys) the heatsink doesnt touch half of them. im kinda concerned about this, but it has been pretty stable. so i dunno
You see, HDD space is like money, you can never have too much :up: ..........or he's running the worlds largest pr0n site. :shocked:Quote:
Originally Posted by eToh